Philips SL111A2 Manuel utilisateur

Features

Ballast Channel: 0 05" (1.3mm) min. thick, 1-1/2" x 1-1/2" (38mm x 38mm) brushed

and anodized extruded aluminum ballast channel. Provided with knock-cuts arc

threaded holes to accept all mounting accessories.

Channel Cover: 0.04" (1mm) thick brushed and anodized aluminum ballast cover

Press-ﬁt installation. No visible hardware.

Multi-fonction Bloc (2): Solid brushed and anodized aluminum ﬁnish. Retains

lampholder housing to the ballast channel. Also functions as a wireway for continious

rows and patterns

Lampholder Housing (4): 0.08" (2mm) min thick, 1" (25mm) square brushed and

anodized aluminum with turret style locking socket.

Plug Insert (2): 0.56" (14mm) dia. 0.31" (8mm) min. deep. Solid brushed and

anodized aluminum ﬁnish. Hide the holes at each end of ballast channel when

luminaire is not row mounted.

Options and Accessories

Emergency Lighting: Electronic Bodine slim proﬁle battery pack. The emergency

ballast senses the power failure and immediately switches to emergency made

by illuminating the lamp at a reduced lumen output for a minimum of 90 mins. The

battery fully recharges within 24 hours. Add sufﬁx (EM) to the catalogue numbers.

DALI Interface: Digital Addressable Lighting Interface available upon request

for individual luminaires. Ballast 120 volts or 277 volts only. Consult your

Lightolier representative.

Markings

cULus Listed Suitable for damp locations.

Mounting

Direct Mount: Square canopies or invisible feed suitable for plaster ceiling, exposed

ceiling or suspended ceilings mounts.

KUBIK 1.5 SL111A2

Page 1 of 4 Bare Lamp Flush Unit

Dimensions

Lightolier www.lightolier.com

631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710

We reserve the right to change details of design, materials and finish.

Canlyte www.canlyte.com

3015 Louis-Amos, Lachine, Québec H8T 1C4 • (514) 636-0670 • (514) 636-0460

Job Information Type:

Job Name:

Cat. No.:

Lamp(s):

Notes:

Suspended Mount: Single stem or aircraft cable with round canopy suitable

for mounting on a standard outlet box for plaster ceiling exposed installation

or suspended ceilings mounts. Stem and cable mounts can both be used on the

same luminaire.

Patterns: Suitable for different patterns in continuous row mounting.

Electrical

Ballast: Electronic slim proﬁle 1 lamp 28W T5 or 54W T5H0 Iinear ballast.

U: Universal voltage ballast automatically detects 120V to 277V, 50 or 60Hz

operations.

1: 120V ballast only.

2: 277V ballast only.

H: 347V ballast only.

Lampholder: G5 plug-in base, miniature Bi-pin.

Finish

Natural brushed and anodized aluminum. All painted parts are powder coat

paint process.

Ordering guide (complete luminaire consist of unit & power feed)

Unit/Louver Cat. No. Lamp (linear) Volts Ballast Type Finish

SL111A228PIU 120/277V

SL111A228PIH 2 -28W T 5 347V Programmed Rapid Start

SL111A254PIU 120/277V

SL111A254PIH 347V Brushed and Anodized Aluminum

SL111A254MZ1 2-54W T5 HO 120V

SL111A254MZ2 277V Dimming Mark 10

SL111A254PCU 120/277V Dimming PowerSpec HDF

46-3/16"

(1173mm)

3-1/2"

(89mm)

(25mm)

1-1/2"

(38mm)

Ballast Channel Channel Cover Lampholder Housing

Multi-Function Block Plug Insert

Lightolier is a Philips group brand

KUBIK 1.5 SL111A2

Page 2 of 4 Bare Lamp Flush Unit

Job Information Type:

Lightolier www.lightolier.com

631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710

We reserve the right to change details of design, materials and finish.

Canlyte www.canlyte.com

3015 Louis-Amos, Lachine, Québec H8T 1C4 • (514) 636-0670 • (514) 636-0460

Accessories/Options

Cat. No. Finish Feed Canopy Kit

SL003JLG

SL003JWH

Textured Light Grey

White

Mounts to end or middle of the channel for power feed from

3" (76mm) or 4" (102mm) octagonal outlet box. Kit includes

one 0.05" (1.3mm) thick, 4-1/2" (114mm) grounded square steel

plate. Comes with 4 wires 18 AWG, 10 Amps max.

4-1/2"

(114 mm)

Square

Cat. No. Finish Invisible Feed Kit

SL003K Corrosion Protected Accepts conduit or cable with 3/8" (10mm) or 1/2" (13mm)

electrical connector (by others). Kit includes one 0.06" (1.5mm)

thick wall by 1/2" (13mm) dia. seamless steel stem and,

one 0.09" (2.3mm) thick by 5/8" (16mm) by 15/16" (24mm) dia.

aluminum connector. (20 Amps max.)

Cat. No. Finish Power Feed Stem Kit

SLO03M18LG

SLO03M36LG

SLO03M48LG

SLO03M72LG

SLO03M18WH

SLO03M36WH

SL003M48WH

SLO03M72WH

18" Textured Light Grey

36" Textured Light Grey

48" Textured Light Grey

72" Textured Light Grey

18" White

36" White

48" White

72" White

Mounts to a 3" (76mm) or 4" (102mm) octagonal outlet box

Kit includes one 0.024" (0 6mm) thick, 5" (127mm) round steel

canopy, and one 0.06" (1.5mm) thick, 1/2" (13mm) dia. seamless

steel stem, available in 4 different lengths and two decorative

cylinder head screws. Complete installation of Power Feed

Stem Kit. Field cuttable, re-thread stem 1/4-18 NPS. Comes

with 5 pre-assembled wires. 10 Amps max.

Cat. No. Finish Stem Mounting Kit (non-electrical)

SLO04M18LG

SLO04M36LG

SLO04M48LG

SLO04M72LG

SLO04M18WH

SLO04M36WH

SLO04M48WH

SLO04M72WH

18" Textured Light Grey

36" Textured Light Grey

48" Textured Light Grey

72" Textured Light Grey

18" White

36" White

48" White

72" White

Mounts to a 3" (76mm) or 4" (102mm) octagonal outlet box

Kit includes one 0.024" (0 6mm) thick, 5" (127mm) round steel

canopy, and one 0.06" (1.5mm) thick, 1/2" (13mm) dia. seamless

steel stem, available in 4 different lengths and two decorative

cylinder head screws. Complete installation of Power Feed

Stem Kit. Field cuttable, re-thread stem 1/4-18 NPS.

Cat. No. Finish Grid Ceiling Feed Kit

SL003LLG

SL003LWH

Textured Light Grey

White

Mounts along runner or at the intersection of runners. Kit

Includes one 2-1/8" (54mm) deep by 4" (102mm) grounded

octagonal outlet box, one 0.05" (1.3mm) thick universal

crossbar, one 4-1/2" (114mm) white plastic square, and two

t-bar clips 5/32" (4mm) thick spacer, one 0.04" (1 mm) thick

aluminum canopy and two t-bar wrap around clips. Comes

with 4 wires 18 AWG, 10 Amps max.

Lightolier is a Philips group brand

KUBIK 1.5 SL111A2

Page 3 of 4 Bare Lamp Flush Unit

Job Information Type:

Lightolier www.lightolier.com

631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710

We reserve the right to change details of design, materials and finish.

Canlyte www.canlyte.com

3015 Louis-Amos, Lachine, Québec H8T 1C4 • (514) 636-0670 • (514) 636-0460

Cat. No. Finish Power Feed Cable Kit

SL003NLG

SL003NWH

Textured Light Grey

White

Mounts to a 3" (76mm) or 4" (102mm) octogonal outlet box.

Kit includes one 0.024" (0.6mm) thick, 5" (127mm) round steel

canopy, one 0.05" (1.3mm) thick grounded crossbar threaded

stud, one 0.046" (1.2mm), 96" (2438mm) long aircraft galvanized

cable with zinc plated hanger adjusting glider hardware,

two white plastic cable stay and one 18 AWG (AWM), 10 feet

(3048mm) long white cord, 10 Amps max.

Cat. No. Finish Extension Blank (4')

SL003P4 Brushed Aluminum Permits power feed between two 1.5" x 1.5" (38mm x 38mm)

brushed and anodized units in a straight run with supplied

extra wires 18 AWG, 10 Amps max, and wire connectors

to energize them. Includes one 46-3/16" (1173mm) long

extruded aluminum channel and cover, two solid aluminum

multi-function blocks as a wireway, plug inserts and wire

connectors.

46-3/16"

(1173 mm)

Cat. No. Finish Invisible Coupler

SL003Q Zinc plated Invisible coupler for joining two Kubik 1.5 units together

mechanically or/and electrically. Recommended for direct

surface mounting. Comes with 4 wires 18 AWG, 10 Amps max.

Cat. No. Finish 5 Face Connector (1-lamp unit)

SL003R Brushed Aluminum Kubik 1.5 units coupled with exclusive solid brushed and

anodized aluminum 5-face connectors and power feed can

satisfy virtually any layout requirement. The connector permits

you to create square, rectangular, continuous rows, L, T,

X conﬁgurations. Includes four threaded couples, plug insert

(3), four wires 18 AWG and wire connectors, 10 Amps max.

Kubik 1.5

1.5"

(38 mm)

Cat. No. Finish Cable Mounting Kit (non-electrical)

SL004NLG

SL004NWH

Textured Light Grey

White

Mounts to a 3" (76mm) or 4" (10mm) octagonal outlet box.

Kit includes one 0.024" (0.6mm) thick, 5" (127mm) round steel

canopy, one 0.05" (1 3mm) thick grounded crossbar, threaded

stud, one 0.046" (1.2mm), 96' (2438mm) long galvanized

aircraft galvanized cable with zinc plated hanger and

adjusting glider hardware. Can be used with either Cable

or Stem Power Feed Kit.

Cat. No. Finish 5 Face Connector (2-lamp unit)

SL003S Brushed Aluminum Kubik 1.5 units coupled with exclusive solid brushed and

anodized aluminum 5-face connectors and power feed can

satisfy virtually any layout requirement. The connector permits

you to create square, rectangular, continuous rows, L, T, X

conﬁgurations. Includes four threaded couples, plug insert (3),

four wires 18 AWG and wire connectors, 10 Amps max.

Lightolier is a Philips group brand

KUBIK 1.5 SL111A2

Page 4 of 4 Bare Lamp Flush Unit

Lightolier www.lightolier.com

631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710

We reserve the right to change details of design, materials and finish.

SL003J

ZONE

DEG

ALONG 22.5 45 67.5 ACROSS

0 509 509 509 509 509

5 512 512 514 516 509

15 490 503 522 536 532

25 454 477 518 547 548

35 399 438 495 504 497

45 329 390 421 435 437

55 247 313 337 368 376

65 160 216 260 325 355

75 78 130 232 315 348

85 12 93 216 302 338

90 0 86 207 293 322

95 12 93 216 302 338

105 78 130 232 315 348

115 160 216 260 325 355

125 247 313 337 368 376

135 329 390 421 435 437

145 399 438 495 504 497

155 454 477 518 547 548

165 490 503 522 536 532

175 512 512 514 516 509

180 509 509 509 509 509

COEFFICIENTS OF UTILIZATION

ZONAL CAVITY METHOD * EFFECTIVE FLOOR CAVITY REFLECTANCE = .20

80 70 50

Wall Reﬂectance

70 50 30 10 70 50 30 10 50 30 10

DETERMINED IN ACCORDANCE WITH CURRENT IES PUBLISHED PROCEDURES

LUMINAIRE INPUT WATTS = 62.6

Room Cavity Ratio

ZONE LUMENS % LAMP % LUMINAIRE

0-30 430 8.29 10.50

0-40 725 13.94 17.67

0-60 1336 25.69 32.57

0-90 2051 39.45 50.00

40-90 1326 25.50 32.33

60-90 715 13.76 17.43

90-180 2051 39.45 50.00

0-180 4102 78.90 100.00

DISTRIBUTION

CANDLEPOWER CURVE

Performance

CANDLEPOWER

REPORT NO: CB902

CAT. NO: SL111A228PIU

2 x 28W T5 at 2600 Lumens

Efficiency: 78.9 %

Candela at Nadir: 509cd

0°

90°90°

180°

300

600

900

0 .85 .85 .85 .85 .78 .78 .78 .78 .66 .66 .66

1 .76 .72 .68 .65 .70 .66 .63 .60 .56 .53 .51

2 .68 .62 .57 .52 .63 .57 .52 .48 .48 .44 .41

3 .62 .54 .48 .43 .57 .50 .45 .40 .42 .38 .34

4 .57 .48 .41 .36 .52 .44 .38 .34 .37 .33 .29

5 .52 .42 .35 .30 .47 .39 .33 .28 .33 .28 .24

6 .48 .38 .31 .26 .44 .35 .29 .24 .29 .25 .21

7 .44 .34 .27 .23 .40 .31 .25 .21 .26 .22 .18

8 .40 .30 .24 .19 .37 .28 .22 .18 .24 .19 .16

9 .37 .27 .21 .17 .34 .25 .20 .16 .21 .17 .14

10 .35 .25 .19 .15 .32 .23 .17 .14 .19 .15 .12

SL003M

SL004M

SL003M

SL003S

SL003M

SL003N

SL004M

SL004N

SL004M

SL003M SL003N

SL003S

SL111A2 SL111A2

SL111A2

SL111A2 SL111A2

SL111A2

SL111A2SL111A2 SL111A2SL003R SL003R SL003RSL003P4

SL004N SL004N SL004N SL003N

Patterns

Job Information Type:

Canlyte www.canlyte.com

3015 Louis-Amos, Lachine, Québec H8T 1C4 • (514) 636-0670 • (514) 636-0460

Lightolier is a Philips group brand

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Philips Luminaire

Philips

Philips iColor Cove QLX Powercore Manuel utilisateur

Philips

Philips Selecon Manuel utilisateur

Philips

Philips ProSpec 37108 Manuel utilisateur

Philips

Philips SpotOn Ultra 69141/04/PH Manuel utilisateur

Philips

Philips HF3470/01 Manuel utilisateur

Philips

Philips Lytespan 23S20MR Manuel utilisateur

Philips

Philips VL72 Manuel utilisateur

Philips

Philips SL BAR 620 Mode d’emploi

Philips

Philips Calculite C4CIN Manuel utilisateur

Philips

Philips PTS5-1 Manuel utilisateur

Philips

Philips EG1-6 Manuel utilisateur

Philips

Philips Lytecaster 2000P1 Manuel utilisateur

Philips

Philips Lytespan 83B39LE Manuel utilisateur

Philips

Philips Selecon PLPROFILE1 MKI Mode d’emploi

Philips

Philips 32614 Series Manuel utilisateur

Philips

Philips Lytespan 23S20P3 Manuel utilisateur

Philips

Philips Guardsman Vandal Resistant Manuel utilisateur

Philips

Philips Lytespan 22MW4 Manuel utilisateur

Philips

Philips Lytecaster 1004ICV Manuel utilisateur

Philips

Philips Selecon SPX series Manuel utilisateur

Philips

Philips Ligtolier BESF2X2 Manuel utilisateur

Philips

Philips HF3471/01 Manuel technique

Philips

Philips 33218-31-16 Manuel utilisateur

Philips

Philips 69108-32-PU Manuel utilisateur

Manuels Luminaire populaires d'autres marques

Emos

Emos CLASSIC ZY1431T Manuel utilisateur

Westinghouse

Westinghouse Outdoor Lighting Fixture Manuel utilisateur

Hedler

Hedler C 12 silent Manuel utilisateur

Blizzard Lighting

Blizzard Lighting Puck: CSI Manuel utilisateur

Energetic Lighting

Energetic Lighting ELYSL-5004 Series Manuel utilisateur

Lightmaxx

Lightmaxx Shaft 5R Manuel utilisateur

Triarch

Triarch 31083 Manuel utilisateur

IKEA

IKEA TIVED Manuel utilisateur

Lightolier

Lightolier LP200 Manuel utilisateur

Chauvet Professional

Chauvet Professional ROGUE R1 BEAM WASH Manuel utilisateur

Martin

Martin MAC 250 Krypton Manuel utilisateur

Cooper Lighting

Cooper Lighting Halo L3232E Manuel utilisateur

Stageline

Stageline ODW-2410RGBW Manuel utilisateur

Light Sky

Light Sky Tornado Series Manuel utilisateur

Lightolier

Lightolier Paralyte 2424 PLA2G9LS26U Manuel utilisateur

Lightolier

Lightolier Lytespan 83ED17S Manuel utilisateur

Lightolier

Lightolier Calculite CS8226 Manuel utilisateur

ArtFox

ArtFox Beam 15R extreme Manuel utilisateur