Philips ProSpec 26000 Manuel utilisateur

631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710

We reserve the right to change details of design, materials and finish.

Job Information Type:

Job Name:

Cat. No.:

Lamp(s):

Notes:

ProSpec Track Lighting 26000

Page 1 of 4 Track

8 Plain Track

7 Feed Track

47-5/8"

95-5/8"

143-5/8"

13/64"

Feed

See Detail A ( pg 4)

1 3/16"

1 9/16" 1 5/8"

3/8"

13/64"

48"

96"

144"

1/16"

Features

1. Track: 6063T-5 structural aluminum extrusion; average wall thickness .08.

2. Flush Mounting Clips: spring steel. Black or white nylon coated to prevent

rusting and marking ceiling. Furnished with track unit.

3. Conductors: “U” shaped copper conductor, increases contact surface area

minimizes contact resistance provides reliable positive connection.

4. Insulated liner: .040” wall, high temperature extruded thermoplastic.

5. Toggle Bolts and Screws: furnished with track unit.

6. Dead End Cap: molded thermoplastic.

7. Feed Track.

8. Plain Track.

9. Standoff Mounting Clip: 1/16” extruded aluminum, one screw mounting,

one screw tightening. 3/8” gap helps to compensate for ceiling irregularities.

Provides rigid support for dense loading of track.

10. Feed-in Connector Module: included with feed track.

11. Removable Hole Plug: for surface feed 3/8” or 1/2” trade size connector.

12. KO: accepts, 3/8” or 1/2” trade connector for feed.

13. Wire Cover: molded thermoplastic.

Mechanical

Track units plug together and lock securely to prevent accidental separation.

ProSpec track fixtures can be attached at any point along the track. Track units

may be field cut.

Electrical

(2) circuits. Each circuit is 120V, 60Hz, 20 AMP compatible. Each circuit has

dedicated neutral for maximum control flexibility. Track units are continuously

grounded throughout. Electrical conductors are concealed in an insulated liner

in the track. Intended for wiring to branch circuit building wire with ground, in

accordance with National and local codes.

Mounting

Surface: ProSpec track can be surface mounted either flush to a surface or

with clips

1/16” clips are provided with the track and space the track 1/16” from the

ceiling.

3/8” standoff clips can be ordered separately. These space the track 3/8” from

the ceiling, provide a rigid support and a pleasing appearance on uneven ceilings.

Stem: ProSpec track can also be suspended from horizontal surfaces or sloped

surfaces. Stems can be field cut to provide any length from a surface with a

maximum length of 3”.

A sloped surface (ceiling) adapter is available to allow the track to hang verti-

cally with the track opening horizontal to the floor.

Finish

All painted finishes are baked enamel.

Label

UL, I.B.E.W

Catalog No.

Plain Track Feed Track

Finishes: 4’ 8’ 12’ 4’ 8’ 12’

Matte White 26004WH 26008WH 26012WH 26001WH 26002WH 26013WH

Matte Black 26004BK 26008BK 26012BK 26001BK 26002BK 26013BK

Job Information Type:

631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710

We reserve the right to change details of design, materials and finish.

ProSpec Track Lighting 26000

Page 2 of 4 Track

Track Mounting Clips

3/8” Standoff Clips, order separately. Recommended

2 clips per 4’, 3 clips per 8’, 4 clips per 12’ track units.

Use additional clips for more support in high load

applications. Toggle bolts are included.

Not recommended for wall mounting.

26478WH Matte White (4) per pack.

26478BK Matte Black (4) per pack.

Direct Mounting

Toggle bolts and nylon insulators are furnished with

Track, two per 2’ and 4’ track, three per 8’ and (4) for

12’ track. Mount through existing holes in track. Top

of track sits flush to ceiling.

Recommended for wall and ceiling mounting.

1/16” Flush Mount Clips

Nylon coated spring steel included with track units.

Spaces track 1/16” from ceiling. Recommended 2 per

4’, 3 per 8’, and 4 per 12’ track sections. Use addi-

tional clips for more support when track is heavily

loaded. Clips may be ordered separated.

Not recommended for wall mounting.

56451WH Matte White (set of 10)

56451BK Matte BK (set of 10)

Grid Ceiling Mounting Clips

Square Edge Panels and 9/16” - 15/16” T-Bars Clip

is supplied assembled. Mounts easily onto T-Bars by

rotating clips. Use two per 4’ track, three per 8’ and

12” track.

6089 (9) Clips

Regressed Edge Panels

9/16” - 15/16” T-Bars

Clips os supplied assembled. Mounts easily onto

T-Bars by rotating clips. Use two per 4’ track, three

per 8’ and 12’ track.

Grid Ceiling Canopy Kit (End & Floating)

For mounting the track to grid suspended ceilings.

Mounts to ceiling types shown above using clips

6087, 6088, or 6089 which are ordered separately.

Includes a special outlet box to fit onto runners.

Power can be fed to Feed Track, Live End, “L”, “T”,

“X”, and In-Line connectors. Mounts along runner or

at the intersection of runners.

26096WH Matte White

Surface Canopy Kit (End & Floating Feed)

Canopy can be mounted directly over the end of the

feed track, power extension, in-line, ‘L’, ‘T’, and ‘X’

connectors. Canopy also can be positioned anywhere

on the track up to 4’ from the edge of the track extru-

sion (floating feed, wire cover included). Power can

be fed into feed track, power extension, in-line, ‘L’,

‘T’, and ‘X’ connectors when utilizing the floating

feed option. Canopy mounts to a 4” octagonal outlet

box. Use 1/16” flush mounting clips (supplied with

track) or direct mount to ceiling or wall.

26060WH Matte White

26060BK Matte Black

Standoff Canopy Kit (End & Floating Feed)

For use with 26478WH, BK 3/8” standoff mounting

clips (ordered separately). Canopy can be mounted

directly over the end of the feed track, power

extension, in-line ‘L’, ‘T’, and ‘X’ connectors. Canopy

also can be positioned anywhere on the track up

to 4’ from the edge of the track extrusion (floating

feed, wire cover included). Power can be fed into

feed track, power extension, in-line, ‘L’, ‘T’, and ‘X’

connectors when utilizing the floating feed option.

Canopy mounts to a 4” octagonal outlet box.

26061WH Matte White

26061BK Matte Black

Track Mounting and Power Feed Systems

3/8"

Toggle Bolt

Nylon Spacer

Screw

T-Runner

Square

Edge Panel

9/16" - 15/16"

6088 (9) Clips

9/16" -

15/16"

1/4" -

9/16" 5/16"

Slotted Grid

Runner

T-Runner

Regressed

Edge Panel

6087 (9) Clips

4" Octagon

Outlet Box

(by others)

T-Bar

T-Bar Mounting

Clip

Feed Track

4" Octagon

Outlet Box

(by others)

Square Canopy

Feed Track

or Connector

1/16" Flush

Mounting Clip

Job Information Type:

631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710

We reserve the right to change details of design, materials and finish.

ProSpec Track Lighting 26000

Page 3 of 4 Track

Stem Mounting Kits

Mounts to a 4” Octagon outlet box. Use two per 4’

track, three per 8’ and 12’ track. When making a run

of track do not exceed 4’ between stems. Use addi-

tional stems for additional support. Power is fed to

the track with the stem closest to the track feed-in

point. For power feed to Feed Track and Live End, “L”,

“T”, “X”, In-line connectors. Stem can be field cut.

Not recommended for wall mounting.

18” Stem 48” Stem

Actual length for ceiling to top of track:

17 3/8” 47 3/8”

Matte White 7584 7586

Matte Black 7683 7681

Swivel Stem Mounting Kits

Adjusts from 0° to 90°. Can be field cut. 48” stem.

7480 Matte White

7481 Matte Black

Floating Invisible Feed

Can be mounted anywhere along the track at a

maximum distance of 4’ from edge of track extrusion.

Accepts conduit or cable with 3/8” or 1/2” electrical

connector (by others). Can be used with Feed Track,

Live End, “L”, “T”, “X”, and In-line connectors. Use

Track Mounting Clips to mount the track.

26082 Zinc Plated

Stem Extension Kit

Mounts to any system kit to extend its length to 48”.

Cannot be field cut.

7582 Matte White

7680 Matte Black

Power Extension Connector (Live End)

Replaces Dead End Cover at end of track to permit

power continuity around structural obstructions to

another track section. Not polarized. Can be fed

directly from surface or from ceiling using a 3/8”

or 1/2” electrical connector (by others).

26046WH Matte White

26046BK Matte Black

Over Beam or Through Beam

Through Wall or Column

Track Mounting and Power Feed Systems

3" or 4" Octagon

Outlet Box

(by others)

This end may be

field cut.

Stem 1/4"-18

NPSM Thread

Clamp Set

Feed Track

3" or 4" Octagon

Outlet Box

(by others)

0ϒ - 90ϒ Ceiling

Slope

This end may be

field cut.

Stem 1/4"-18

NPSM Thread

Clamp Set

Feed Track

Clamp Set

Feed Track

Wire Cover

Electrical

Fitting

(by others)

Stem Extension

1/2" O.D. Steel

Tube

1/4 - 18 NPSM

Thread.

Clamp Set

Line

Joint

See Detail A

(pg. 4)

Power Ext.

(Live End)

5-7/8"

1-3/16"

4-3/16" 3-1/8"

3/8"

Connector

Beam

Jump

Track Track

Power Extention

Connector

Wall

Power Extention

Connector

3/8" Connector

Jump (Conduit)

Track Track

Power Extention

Connector

Power Extention

Connector

Wall

Line

Joint

See Detail A

(pg. 4)

Power Ext.

(Live End)

5-7/8"

1-3/16"

4-3/16" 3-1/8"

Job Information Type:

631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710

We reserve the right to change details of design, materials and finish.

ProSpec Track Lighting 26000

Page 4 of 4 Track

“L” Connector

The “L” connector is pre-wired.

Not polarized.

26050WH Matte White

26050BK Matte Black

“T” Connector

The “T” connector is not pre-wired

or polarized. Used to make “T” pattern

with track. 12ga. copper jumper

wires supplied to make all

necessary connections.

26051WH Matte White

26051BK Matte Black

“X” Connector

The “X” connector is not pre-wired.

Used to make “X” pattern with track.

12ga. copper jumper wires supplied

to make all necessary connections.

Not polarized.

26052WH Matte White

26052BK Matte Black

In-Line Connector

Permits power feed-in between

track units in a straight run of track.

The “In-Line” connector is pre-wired.

Not polarized.

26054WH Matte White

26054BK Matte Black

Mini-Coupler

Used to connect two pieces of track together

mechanically and electrically. Power cannot

be feed into the mini-coupler.

26049WH Matte White

26049BK Matte Black

Detail A

Use 12ga. solid copper wire for

feed connections including ground.

See Detail A

Typ. for all Track

Connections

4.18"

3.59"

5 1/4"

Extruded Aluminum Housing

3 7/16"

Line Joint

No Space

Two wires may be

attached to one

screw terminal.

Feed Connections for Surface and Stem Mounted Patterns

All connectors can be fed directly from above using a 3/8” or 1/2” electrical connector (by others).

NEUT

Extruded Aluminum Housing

10 9/16"

3.59"

1/4" 7 3/16"

NEUT

See Detail A

Typ. for all

Track

Connections

7 3/16"

3.59"

See Detail A

Typ. for all Track

Connections

Extruded Aluminum Housing

10 9/16"

6.44"

Extruded

Aluminum

Housing 6 3/16"

3 3/32" See Detail A

Typ. for all Track

Connections

NEUT

Ce manuel convient aux modèles suivants

Autres manuels Philips Luminaire

Philips

Philips GreenUp Wellglass BY200P Series Guide de l'utilisateur

Philips

Philips 69101-14-PH Manuel utilisateur

Philips

Philips Lytecaster 1001 Manuel utilisateur

Philips

Philips FS01 Manuel utilisateur

Philips

Philips EvoKit 2x4 P 36L 36W 835 2 0-107 G2 Manuel utilisateur

Philips

Philips 1001FDIC Manuel utilisateur

Philips

Philips iColor Cove QLX Powercore Manuel utilisateur

Philips

Philips 33290-31-16 Manuel utilisateur

Philips

Philips 6910131PH Manuel

Philips

Philips 69112-31-PH Manuel utilisateur

Philips

Philips Lytecaster 1021 Manuel utilisateur

Philips

Philips Lytecaster 313X Manuel utilisateur

Philips

Philips Ligtolier BESF2X2 Manuel utilisateur

Philips

Philips SpotOn Ultra 69141/04/PH Manuel utilisateur

Philips

Philips Lirio 57981/**/16 Manuel utilisateur

Philips

Philips Louver IC Series Manuel utilisateur

Philips

Philips 69141-96-PH Manuel utilisateur

Philips

Philips SpotOn Ultra 69141/14/PH Manuel utilisateur

Philips

Philips 33259-31-16 Manuel utilisateur

Philips

Philips Lytespan LLACTW Manuel utilisateur

Philips

Philips Lytespan 23S20T4 Manuel utilisateur

Philips

Philips eS21 Instructions d'utilisation d'origine

Philips

Philips 1001HCB Manuel utilisateur

Philips

Philips Illuminate Manuel utilisateur

Manuels Luminaire populaires d'autres marques

Emos

Emos CLASSIC ZY1431T Manuel utilisateur

Westinghouse

Westinghouse Outdoor Lighting Fixture Manuel utilisateur

Hedler

Hedler C 12 silent Manuel utilisateur

Blizzard Lighting

Blizzard Lighting Puck: CSI Manuel utilisateur

Energetic Lighting

Energetic Lighting ELYSL-5004 Series Manuel utilisateur

Lightmaxx

Lightmaxx Shaft 5R Manuel utilisateur

Triarch

Triarch 31083 Manuel utilisateur

IKEA

IKEA TIVED Manuel utilisateur

Lightolier

Lightolier LP200 Manuel utilisateur

Chauvet Professional

Chauvet Professional ROGUE R1 BEAM WASH Manuel utilisateur

Martin

Martin MAC 250 Krypton Manuel utilisateur

Cooper Lighting

Cooper Lighting Halo L3232E Manuel utilisateur

Stageline

Stageline ODW-2410RGBW Manuel utilisateur

Light Sky

Light Sky Tornado Series Manuel utilisateur

Lightolier

Lightolier Paralyte 2424 PLA2G9LS26U Manuel utilisateur

Lightolier

Lightolier Lytespan 83ED17S Manuel utilisateur

Lightolier

Lightolier Calculite CS8226 Manuel utilisateur

ArtFox

ArtFox Beam 15R extreme Manuel utilisateur