Phanteks GLACIER C350ip Manuel utilisateur

GLACIER C350ip MANUAL V1.0

STEP 1. PREPARING THE BACKPLATE

PH-C350ip_BK01

INSTALLATION for socket 115x/1366/775, for socket 2011/2066 see next page.

PACKAGE CONTENTS

C350ip Block Backplate

Socket Screws for:

- 115x

- 1366

- 775

Acetal Stando

Socket Screws for:

- 2011-3

- 2066

Thermal Compound

(PH-NDC_01)

STEP 2. INSTALLING THE BACKPLATE

Place the back plate on the rear side of the motherboard so

that the socket screws will stick through the socket mounting holes.

Please seee image for reference.

Make sure the orientation of the

backplate is correct:

Choose the correct position for the Socket Screws.

Insert the four (4) screws into the correct position

indicated on the backplate.

DISCLAIMER - This product is intended for advanced users.

Please consult with a qualied technician for installation. Phanteks

assumes no liability for any damages occurring as a result of using

Phanteks cooling products.

WARNING - Power down the system before installation.

- Do not disassemble the waterblock. Warranty will be voided.

- Perform a leak test before turning on the system.

- Check our website for the latest installation guide.

Make sure the CPU is clean and clear of any residual

traces of thermal paste . Apply a dot (4-5mm size) of

Phanteks thermal compound on the center of the

CPU surface.

STEP 4. APPLYING THERMAL COMPOUND

Please verify that all four scres are inserted

correctly:

Socket positions:

Position 1: 1366

Position 2: 115x

Position 3: 775

STEP 3. INSTALLING THE ACETAL STANDOFFS

Place the four (4) included Acetal Standos onto the

socket screws.

GLACIER C350ip MANUAL V1.0

STEP 5. INSTALLING THE C350ip Block

FINAL STEP. POWER ON

Please check the following:

- Make sure the block is seated properly on the CPU.

- Always perform a leak test before turning on the system.

- Use paper towels under ttings and joints to avoid damage.

- Make sure all hardware has been tested before starting your

water loop.

Remove the protective lm on the copper base rst.

Place the C350ip block on the CPU and tighten the thumb-screws by hand.

Let the pump run for multiple hours. Tilting the system

can help to release air bubbles.

Thanks to the C350ip’s symmetrical design. Both ports can be used as

an inlet or outlet for the water loop.

By securing the screws in a diagonal sequence, the mounting pressure

will be distributed evenly. This optimizes the cooling performance.

Do not use force to overturn the thumb-screws. Please stop when

the screws are at a natural stop.

INSTALLATION for socket 2011-3/2066

STEP 1. INSTALLING THE SOCKET SCREWS

STEP 3. INSTALLING THE C350ip Block

Remove the protective lm on the copper base rst.

Place the C350ip block on the CPU and tighten the thumb-screws by hand.

Place and tighten the four (4) included socket screws by hand on the

Intel 2011-3/2066 socket.

Thanks to the C350ip’s symmetrical design. Both ports can be used as

an inlet or outlet for the water loop.

By securing the screws in a diagonal sequence, the mounting pressure

will be distributed evenly. This optimizes the cooling performance.

Do not use force to overturn the thumb-screws. Please stop when

the screws are at a natural stop.

STEP 2. APPLYING THERMAL COMPOUND

Make sure the CPU is clean and clear of any residual traces of thermal paste .

Apply a dot (4-5mm size) of Phanteks thermal compound on the center

of the CPU surface.

Autres manuels Phanteks Matériel informatique

Phanteks

Phanteks Glacier C350A Manuel utilisateur

Phanteks

Phanteks Power Combo Manuel utilisateur

Phanteks

Phanteks GIGABYTE XTREME GLACIER G2080Ti Manuel utilisateur

Phanteks

Phanteks GLACIER R160C Manuel utilisateur

Phanteks

Phanteks GLACIER G30 STRIX 3090 Manuel utilisateur

Phanteks

Phanteks AMP GH Series Manuel utilisateur

Phanteks

Phanteks GLACIER G2070 Manuel utilisateur

Phanteks

Phanteks NV5 PREMIUM D-RGB KIT Manuel utilisateur

Phanteks

Phanteks GLACIER G6000 Manuel utilisateur

Phanteks

Phanteks GLACIER ONE 240 T30 Manuel utilisateur

Phanteks

Phanteks GIGABYTE XTREME GLACIER G2080Ti Manuel utilisateur

Phanteks

Phanteks GLACIER C370I Manuel utilisateur

Phanteks

Phanteks ECLIPSE P350X Manuel utilisateur

Phanteks

Phanteks EVOLV SHIFT 2 Manuel utilisateur

Phanteks

Phanteks GLACIER C360A Manuel utilisateur

Phanteks

Phanteks GLACIER ONE 240 MP Manuel utilisateur

Phanteks

Phanteks EVOLV SHIFT XT Manuel utilisateur

Phanteks

Phanteks GLACIER G3090Ti ASUS BACKPLATE Manuel utilisateur

Phanteks

Phanteks GLACIER C360i Manuel utilisateur

Phanteks

Phanteks Glacier G1080 Ti Manuel utilisateur

Phanteks

Phanteks Founders Edition GTX Glacier G1080 Ti Manuel utilisateur

Phanteks

Phanteks eclipse p400 Manuel utilisateur

Phanteks

Phanteks Glacier C399A Manuel utilisateur

Phanteks

Phanteks GLACIER G30 STRIX Manuel utilisateur

Manuels Matériel informatique populaires d'autres marques

EMC2

EMC2 VNX Series Manuel du propriétaire

Panasonic

Panasonic DV0PM20105 Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuel utilisateur

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuel utilisateur

Raidon

Raidon iT2300 Manuel utilisateur

National Instruments

National Instruments PXI-8186 Manuel utilisateur

Hauppauge

Hauppauge WinTV-HVR-2250 Manuel utilisateur

Kontron

Kontron CP6002 Manuel utilisateur

Manhattan

Manhattan 702843 Manuel utilisateur

Aphex

Aphex 230 Manuel utilisateur

AMD

AMD Phenom II Manuel d'exploitation

Intel

Intel NUC 12 Pro Manuel utilisateur

dbx

dbx Zone Pro 1260 Manuel utilisateur

Galaxy

Galaxy GHDX2-2430S-24F4D Manuel utilisateur

Intel

Intel AXXRMFBU4 Manuel utilisateur

Kontron

Kontron DIMM-PC/MD Manuel utilisateur

ST X-NUCLEO-SAFEA1B Mode d'emploi

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuel utilisateur