Patton electronics 1068 Manuel utilisateur

USER

MANUAL

VLINK MODEM

Model 1068 and 1058

SALES OFFICE

(301) 975-1000

TECHNICAL SUPPORT

(301) 975-1007

Part# 07M1068-UM

Doc# 05816U2-001

Rev. A

Revised 10/17/06

An ISO-9001Certiﬁed

Company

CONTENTS

1.0 Warranty Information ................................................................. 4

1.1 Radio and TV Interference (FCC Part 15).................................... 4

1.2 CE Declaration of Conformity....................................................... 4

1.3 Service.......................................................................................... 5

2.0 General Information.................................................................... 6

2.1 Features........................................................................................ 6

2.2 Description.................................................................................... 7

3.0 Installation................................................................................... 8

3.1 Standalone unit installation........................................................... 8

3.2 Rack card installation.................................................................... 9

3.3 Connecting the Twisted-Pair Line Interface................................ 10

3.4 Connecting the 10/100Base-T Ethernet Interface ...................... 11

3.5 Connecting the POTS/ISDN line................................................. 12

3.6 Connecting Power ...................................................................... 12

4.0 Configuration ............................................................................ 13

4.1 Configuring the hardware DIP switches...................................... 13

4.2 Configuring DIP Switch S1 ......................................................... 15

Switch S1-1: Ethernet Auto Sense............................................. 15

Switches S1-2 and S1-4: Data Rate........................................... 15

5.0 Operation................................................................................... 17

5.1 Power Up.................................................................................... 17

5.2 Front Panel LED Status Monitors............................................... 17

ASpecifications ........................................................................... 20

A.1 LAN Connection .......................................................................... 20

A.2 Transmission Line ....................................................................... 20

A.3 VDSL Line Rate ........................................................................... 20

A.4 VDSL Distance ............................................................................ 20

A.5 VDSL Surge Suppressor ............................................................. 20

A.6 LED Status Indicators ................................................................. 20

A.7 Power Supply .............................................................................. 20

A.8 Temperature Range .................................................................... 21

A.9 Humidity ...................................................................................... 21

A.10 Dimensions ................................................................................. 21

BMODEL 1068 series Factory

Replacement Parts and Accessories...................................... 22

CVLINK Series Interface Pin Assignment................................. 24

C.1 10/100Base-T Interface .............................................................. 24

RJ-45.......................................................................................... 24

C.2 VDSL Interface ............................................................................ 24

RJ-45.......................................................................................... 24

Terminal Block (1068DV/TB45 Only) ......................................... 24

C.3 POTS/ISDN Interface .................................................................. 24

RJ-45.......................................................................................... 24

DDistance Chart, Based on 24 AWG (0.5 MM).......................... 25

1.0 WARRANTY INFORMATION

Patton Electronics

warrants all VLINK modem components to be free

from defects, and will—at our option—repair or replace the product

should it fail within one year from the ﬁrst date of the shipment.

This warranty is limited to defects in workmanship or materials, and does

not cover customer damage, abuse or unauthorized modiﬁcation.If this

product fails or does not perform as warranted, your sole recourse shall

be repair or replacement as described above.Under no condition shall

Patton Electronics

be liable for any damages incurred by the use of this

product.These damages include, but are not limited to, the following:lost

proﬁts, lost savings and incidental or consequential damages arising

from the use of or inability to use this product.

Patton Electronics

spe-

ciﬁcally disclaims all other warranties, expressed or implied, and the

installation or use of this product shall be deemed an acceptance of

these terms by the user.

Note

Conformity documents of all Patton products can be viewed

online at www.patton.com under the appropriate product page.

1.1 RADIO AND TV INTERFERENCE (FCC PART 15)

This equipment generates and uses radio frequency energy, and if not

installed and used properly—that is, in strict accordance with the manu-

facturer's instructions—may cause interference to radio and television

reception.This equipment has been tested and found to comply with the

limits for a Class A computing device in accordance with the speciﬁca-

tions in Subpart B of Part 15 of FCC rules, which are designed to provide

reasonable protection from such interference in a commercial installa-

tion. However, there is no guarantee that interference will not occur in a

particular installation. If the equipment causes interference to radio or

television reception, which can be determined by disconnecting the

cables, try to correct the interference by one or more of the following

measures: moving the computing equipment away from the receiver, re-

orienting the receiving antenna, and/or plugging the receiving equipment

into a different AC outlet (such that the computing equipment and

receiver are on different branches).

1.2 CE DECLARATION OF CONFORMITY

We certify that the apparatus identiﬁed in this document conforms to the

requirements of Council Directive 1999/5/EC on the approximation of the

laws of the member states relating to Radio andTelecommunicationTer-

minal Equipment and the mutual recognition of their conformity.

The safety advice in the documentation accompanying this product shall

be obeyed.The conformity to the above directive is indicated by the CE

sign on the device.

1.3 SERVICE

All warranty and non-warranty repairs must be returned freight prepaid

and insured to Patton Electronics. All returns must have a Return Materi-

als Authorization number on the outside of the shipping container.This

number may be obtained from Patton Electronics Technical Services at:

• Tel:

(301) 975-1007

• Email:

[email protected]

• URL:

http://www.patton.com

Note

Packages received without an RMA number will not be

accepted.

WARNING

This device is NOT intended nor approved for connec-

tion to the PSTN. It is intended only for connection to

customer premise equipment.

WARNING

•

This device contains no user serviceable parts. The

equipment shall be returned to Patton Electronics for

repairs, or repaired by qualiﬁed service personnel.

•

The external power adapter shall be a listed Limited

Power Source. Ensure that the power cable used

meets all applicable standards for the country in

which it is to be installed, and that it is connected to

a wall outlet which has earth ground. The mains out-

let that is utilized to power the devise shall be within

10 feet (3 meters) of the device, shall be easily

accessible, and protected by a circuit breaker.

•

Do not work on the system or connect or disconnect

cables during periods of lightning activity.

2.0 GENERAL INFORMATION

Thank you for your purchase of this Patton Electronics product.This

product has been thoroughly inspected and tested and is warranted for

one year for parts and labor. If any questions or problems arise during

installation or use of this product, contact Patton Electronics Technical

Support at +1 (301) 975-1007.

2.1 FEATURES

• Easy to install standalone VLINK modems (no conﬁguration required)

• Auto-MDIX Ethernet

• Auto-sensing full or half-duplex Ethernet

• Auto-sensing 10/100Base-TX

• Extends network connections up to 6,000 ft (1.83 km) over 2-wire 24-

AWG unconditioned lines

• Switch selectable line rates up to 16.67 Mbps

• 7 symmetric or asymmetric settings via DIP switch

• POTS/ISDN splitter on board

• Transparent operation

• LED indicators for Power, Ethernet Link & Activity,VLINK link & Quality of

Line (QOL)

• Surge suppression up to 20 kA (8/20

WARNING

The Interconnecting cables shall be acceptable for

external use and shall be rated for the proper applica-

tion with respect to voltage, current, anticipated tem-

perature, ﬂammability, and mechanical serviceability

In accordance with the requirements of council direc-

tive 2002/96/EC on Waste of Electrical and Electronic

Equipment (WEEE), ensure that at end-of-life you sepa-

rate this product from other waste and scrap and deliver

to the WEEE collection system in your country for recy-

cling.

• Available in rack-mount or standalone conﬁgurations

• Made in the USA

2.2 DESCRIPTION

The Patton ElectronicsVLINK/CO andVLINK/CPVDSL modems provide

high-speed LAN connections between peered Ethernet LANs, remote

PCs, or any other network enabled 10/100Base-T device.

Operating in pairs, a VLINK/CO (central ofﬁce) located at one end of the

LAN extension and a VLINK/CP (customer premise) at the other end,

these units can automatically forward LAN broadcasts, multicasts, and

frames across a 2-wire voice-grade twisted-pair link.The data is passed

transparently (unmodiﬁed) through theVLINK modems.The VLINK

modems automatically add and delete MAC addresses, only passing

packets across theVDSL link that are meant for the remote peered LAN.

Figure 1.

Typical application

The VLINK/CO modem and VLINK/CP modem work together to create a

transparent extension between two peered Ethernet LANs. POTS/ISDN

calls can be made over aVDSL link without interfering with the data.

Figure 1 shows a typical point-to-point application.

3.0 INSTALLATION

Because theVLINK modem requires no conﬁguration, it can be installed

quickly.If you are installing a standalone unit, refer to section 3.1 “Standal-

one unit installation”.Otherwise, refer to section 3.2 “Rack card installation”.

Note

If asymmetric transmission or line rates other than 12.5 Mbps

are required, refer to section 4.0, “Conﬁguration” on page 13.

3.1 STANDALONE UNIT INSTALLATION

Do the following:

1. Connect the line interface between the units (refer to section 3.3,

“Connecting the Twisted-Pair Line Interface” on page 10)

Note

See Figure 2 for the standalone unit’s rear panel arrangements.

2. Connect the Ethernet interface (refer to section 3.4, “Connecting the

10/100Base-T Ethernet Interface” on page 11).

3. Connect the power plug (refer to section 3.6, “Connecting Power”on

page 12).

Figure 2.

VLINK modem standalone rear panel

Note

The VDSL twisted-pair terminal block interface is included on

Model 1068DV/TB45 only.

VDSL twisted-pair

terminal block

interface

Power

Made in the USA

Power

jack

VLINK Data & Voice

1068

Ethernet

POTS/ISDN Line

POTS/ISDN twisted-pair

terminal block interface

VDSL twisted-pair

RJ-45 interface

Ethernet

port

3.2 RACK CARD INSTALLATION

The VLINK modem rack card comprised a front card and a rear card.Do

the following to install the cards into the rack chassis:

1. Slide the rear card into the back of the chassis along the metal rails.

2. Secure the rear card using the supplied metal screws.

3. Slide the front card into the chassis until you feel resistance as the

front card engages the rear card.When that happens,

gently

push

the front card forward until it is fully seated in the card-edge recepta-

cle of the rear card (it should

click

into place).

4. Secure the front card using the captive fasteners.

Note

The Model 1001R14 chassis supports “hot swapping” of cards,

so it is not necessary to power down the rack when you install or

remove a VLINK modem rack card.

Figure 3.

VLINK modem rack card

5. Connect the line interface between the units (refer to section 3.3,

“Connecting the Twisted-Pair Line Interface” on page 10)

Note

See Figure 3 for the rack card’s panel arrangements.

VDSL Link

Ethernet

POTS/ISDN

1068RC

Ethernet

Port

POTS/ISDN

Port

VDSL Link

RJ-45 interface

VDSL Link

terminal block

6. Connect the Ethernet interface (refer to section 3.4, “Connecting the

10/100Base-T Ethernet Interface” on page 11).

3.3 CONNECTING THE TWISTED-PAIR LINE INTERFACE

The VLINK modem supports communication between two peer Ethernet

LAN sites over a distance of up to 6,000 ft (1.83 km) over 24 AWG

(0.5 mm) twisted-pair wire.

Note

Actual distance and link performance may vary depending on

the environment and type/gauge of wire used.

Follow the steps below to connect the VLINK modem VDSL interfaces.

Note

The VLINK modem units work in pairs.One of the units must be

a CO (Central Ofﬁce), and the other unit must be a CP (Cus-

tomer Premise). It does not matter which end is the CO and

which is the CP.The link is always initiated by the CP.As long as

the CO is powered on, the CP can establish a link by being pow-

ered on or by having its power reset.

1. To function properly, the two VLINK modems must be connected

together using twisted-pair, unconditioned, dry, metal wire, between

19 (0.9mm) and 26 AWG (0.4mm). Leased circuits that run through

signal equalization equipment are not acceptable.

2. TheVLINK modem is equipped with two interface jacks that can be

used on the VDSL interface, an RJ-45 or a terminal block.These

VDSL interfaces are a two-wire interface.Observe the signal/pin rela-

tionships on the VLINK modem's VDSL interface jacks.

The

RJ-45 connector

on the VLINK modem's twisted pair interface

polarity insensitive

and is wired for a two-wire interface.The signal/pin

relationship is shown in Figure 4.

Figure 4.

VLINK modem (RJ-45) twisted pair line interface.

1 (no connection)

2 (no connection)

3 (no connection)

4 (2-Wire RING)

5 (2-Wire TIP)

6 (no connection)

7 (no connection)

8 (no connection)

Autres manuels pour 1068

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Patton electronics Modem

Patton electronics

Patton electronics 1060 Manuel utilisateur

Patton electronics

Patton electronics 1082/F Manuel utilisateur

Patton electronics

Patton electronics OnSite 1069 Manuel utilisateur

Patton electronics

Patton electronics 1226 Manuel utilisateur

Patton electronics

Patton electronics 1025 Manuel utilisateur

Patton electronics

Patton electronics Model 1065 Manuel utilisateur

Patton electronics

Patton electronics 1092 Manuel utilisateur

Patton electronics

Patton electronics 1015 Manuel utilisateur

Patton electronics

Patton electronics RS-232 Manuel utilisateur

Patton electronics

Patton electronics 1006 Manuel utilisateur

Patton electronics

Patton electronics 1058 Manuel utilisateur

Patton electronics

Patton electronics NetLink 1082 Manuel utilisateur

Patton electronics

Patton electronics 1089/C Manuel utilisateur

Patton electronics

Patton electronics 1110ARC Manuel utilisateur

Patton electronics

Patton electronics 1080A Manuel utilisateur

Patton electronics

Patton electronics 1089/I Manuel utilisateur

Patton electronics

Patton electronics SMARTNODE 1200 Manuel utilisateur

Patton electronics

Patton electronics IM2RC/F-128K Manuel utilisateur

Patton electronics

Patton electronics MODEL 1012AR Manuel utilisateur

Patton electronics

Patton electronics 1092 Manuel utilisateur

Patton electronics

Patton electronics 1088/I Manuel utilisateur

Patton electronics

Patton electronics 1004A Manuel utilisateur

Patton electronics

Patton electronics 1088/K Manuel utilisateur

Patton electronics

Patton electronics MODEL 1075 Manuel utilisateur

Manuels Modem populaires d'autres marques

Davicom

Davicom DM562AP Manuel utilisateur

EpiValley

EpiValley TATA indicom SXC-1080 Manuel utilisateur

Zte

Zte WiMAX Manuel utilisateur

Intelimax

Intelimax MA-2060 Manuel utilisateur

SMC Networks

SMC Networks D3CM1604V Manuel d'utilisation et d'entretien

Telstra

Telstra Wi-Fi 4G Advanced Pro X Manuel utilisateur

Thrane&Thrane

Thrane&Thrane imarsat EXPLORER 300 Manuel utilisateur

Samsung

Samsung AceLink SAM-335A Manuel utilisateur

Enfora

Enfora Enabler-G Guide de configuration rapide

iRZ

iRZ ATM2-232 Manuel utilisateur

Zhone

Zhone 6310 Manuel utilisateur

Paradyne

Paradyne Hotwire 7976 Manuel utilisateur

US Robotics

US Robotics 3453C Manuel utilisateur

MaxTech

MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Manuel utilisateur

Zte

Zte MF823 Manuel utilisateur

Four-Faith

Four-Faith F1403 Manuel utilisateur

Sierra Wireless

Sierra Wireless AIRLINK MP595W Manuel utilisateur

Gemtek

Gemtek WiMAX WIXFBR-103 Manuel utilisateur