Ouring 3DTALK T-real MINI Manuel utilisateur
Jiangsu Ouring 3D Technology Co., Ltd.
2
Contents
1. PRODUCT DESCRIPTION ..................................................................................................... 3
1.1 Product introduction ............................................................................................................. 3
1.2 Precautions............................................................................................................................ 4
2. PRODUCT OVERVIEW......................................................................................................... 5
2.1 Product appearance .............................................................................................................. 5
2.2 Product specification............................................................................................................. 8
3. OPERATING INSTRUCTIONS................................................................................................ 9
4. PRINTER OPERATION INTERFACE ..................................................................................... 30
5. REMOVING MODEL.......................................................................................................... 30
6. ROUTINE MAINTENANCE ................................................................................................. 31
7. WARRANTY ..................................................................................................................... 31
Jiangsu Ouring 3D Technology Co., Ltd.
3
1. Product Description
1.1 Product introduction
This document is a user guide for 3DTALK brand, T-real series MINI 3D printers. Please read the
document carefully before unpacking and using 3D printers of 3DTALK T-real MINI.
Jiangsu Ouring 3D Technology Co., Ltd.
4
1.2 Precautions (Please read the following content carefully.)
Note: Please do use the designated power adapter included in the machine.
Caution: Wear goggles during removal of auxiliary support materials, thus preventing material
chippings from hurting your eyes
Note: In the printing process, slight odor may be generated due to high temperature, but it will
not make person feel uncomfortable. You are recommended to use the machine in a well ventilated
environment.
Warning: The printer shall be repaired by the authorized repairing party only. Before
replacement of any component, please turn off the printer and cut off the power supply.
Warning: There is some dangerous factor upon removable components. Please keep your
fingers and body away from them.
Hot surface danger: During setting and working, do not contact the extruder. At this time, the
temperature of the extruder is very high.
Be careful of electric shock: Due to electric shock risks, please do not contact any internal
electronic component.
Jiangsu Ouring 3D Technology Co., Ltd.
5
2. Product Overview
2.1 Product appearance
I. Front view of printer
(1) Framework (2) Power button (3) Platform height adjusting knob
(4) Printing platform (5) Touch screen (6) extruder
(7) Filament guide tube (8) Nozzle (9) Filament
(10) Filament Holder
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
Jiangsu Ouring 3D Technology Co., Ltd.
6
II. Side view of printer
(1) USB interface (2) Network port (3) Power interface (4) Filament feeder
III. Coordinate axes
Note:
X-axis: Left and right Y-axis: Front and back Z-axis: Up and down
IV. Included accessories
(1
)
(2
)
(3
)
(4
)
Y-axis
Z-axis
axis
X-axis
Jiangsu Ouring 3D Technology Co., Ltd.
7
Note:
All screws in the list of accessories are spares and can be replaced according to the actual situations.
Regarding the accessory pictures in the list of accessories, the actual accessory appearances shall prevail.
PC matte paper
(With 2 sheets)
Jiangsu Ouring 3D Technology Co., Ltd.
8
2.2 Product specification
Specifications and characteristics
MINI Specifications and Characteristics
Technology
Printing Technology FDM (Fused Deposition Modeling)
Function
Building volume
Precision of layer height
Positioning precision
Nozzle diameter 0.2mm/0.4mm optional
Printing speed
(60mm/s-80 mm/s is suggested).
Number of nozzles 1
Working temperature of nozzle ≦280℃
Nozzle flow 24ml/h (fully solid model)
Support The software will generate automatically and easy to be
removed.
Cooling system Air cooling
Specification
Bare machine dimensions (with
filament) 350*251*366mm
Weight of bare machine 8.5KG
Packaging dimension 410*300*485mm
Packaging weight 15KG
Machinery
Body material High-strength sheet with metal spraying
Printing platform (material) Tempered frosted glass pane
LCD 3.5 inch full-color touch screen
Connectivity U-disk, wifi, Ethernet
XYZ movement system Linear guide rail
Stepper motor 42 stepper motor
Software
Document format
160x160x155mm
0.075mm (corresponding to 0.2mm nozzle)
60mm/s-200 mm/s
0.1mm (corresponding to 0.4mm nozzle)
0.2mm (corresponding to 0.4mm nozzle)
0.3mm (corresponding to 0.4mm nozzle)
X/Y/Z axis 11μm
*.3DT/.STL/.gcode /.PLY/.OBJ/.3MF
Jiangsu Ouring 3D Technology Co., Ltd.
9
Operating system
Windows / ios
Control software
Control system based on browser + touch screen control
Power supply
AC input
220V/50HZ
Requirement for power supply
Voltage: 220V, maximum power: 200W
Print Filament
PLA
Support
Environmental requirements
Room temperature: 15°C-30°C
Relative humidity: 20%-50%
Avoidance of machine movement and strong vibration during printing
Stable output of voltage
Jiangsu Ouring 3D Technology Co., Ltd.
10
3. Operating Instructions
Installing printing build plate
Step 1：Remove the print board from the protective foam and place it on the three knob
magnets of printer.
Step 2: Install the filament holder.
Step 3: Install the filament guide tube.
The printing board is equipped
with a strong magnet to
automatically adhere to the
printing build plate.
Fix both screws
Press down the blue spring washer to place the
white filament guide tube.
Do the same operation at the other end.
Table des matières
Autres manuels Ouring Imprimante 3D
