Jiangsu Ouring 3D Technology co.,Ltd
8
Resin Professional Dental model resin, Dental Ortho Resin, Dental
Guide resin
Transfer
Power input
Environmental Requirements
Avoid placing the resin in the following environment: high temperature
environment, local heat source, oxidizing environment, freezing environment,
direct sunlight, ultraviolet radiation, inert gas coverage, dust environment.
The stability of print quality is affected by the heat and humidity, so please
ensure the proper operating conditions. (Temperature 18 - 28 ° C / humidity 40 -
80% RH)
Please place the printer in a clean office environment that meets the above
conditions.
In view of the size of the printer, please prepare a table top with a width of
≥500mm2 and a height of about 600mm.
One computer.（system version-Windows7 or above）
CPU - lnter i3 above
RAM - 4GB above
Graphics card – Nvdia series，1G and above，supporting OpenGL4.1）
Model cleaning alcohol (90% ~ 95%), alcohol vat, ultrasonic cleaner (optional),
UV curing box (optional) etc
Touch Screen Introduction
Boot Interface
In the [File] tab, select the print file stored in the printer and the inserted USB
disk of the printer for printing.
AC110/240V 50/60Hz 400W
USB drive, wifi
