NXP Semiconductors EasyEVSE EV Manuel utilisateur

NXP EasyEVSE EV Charging Station

Development Platform User Guide

NXP Semiconductors Document identifier: CCEVCPGSUG

User Guide Rev. 0, 18 March 2022

Contents

Chapter 1 Introduction........................................................................................... 3

Chapter 2 Solution overview.................................................................................. 4

Chapter 3 Required hardware..............................................................................12

Chapter 4 Required software............................................................................... 15

Chapter 5 Configuring cloud dashboard.............................................................. 17

Chapter 6 Device registration.............................................................................. 23

Chapter 7 Board setup, wiring, and assembly..................................................... 33

Chapter 8 System powerup and operation.......................................................... 46

Chapter 9 Acronyms, abbreviations, and terminology......................................... 53

Chapter 10 Revision history.................................................................................54

Appendix A Appendix...........................................................................................55

NXP Semiconductors

NXP EasyEVSE EV Charging Station Development Platform User Guide, Rev. 0, 18 March 2022

User Guide 2 / 64

Chapter 1

Introduction

This document is a quick and easy guide to get the NXP’s EasyEVSE up and running. EasyEVSE is a simulated electric vehicle

charge station connected to the Microsoft Azure Iot Central.

The EasyEVSE integrates the following NXP product lines: i.MX RT106x Crossover MCU, Kinetis KM3x Metrology MCU,

CLRC663 NFC Frontend, and SE050 Secure element.

When you are familiar with the platform, see the EV Charging Station Development Platform User Manual, which provides a

comprehensive description of each building block of the EasyEVSE.

1.1 How to read this document

It is suggested to read this guide in the following sequence:

1. Solution overview. Solution overview explains the goals and components of the platform.

2. Get the hardware. Required hardware lists the required hardware and boards to run the EasyEVSE.

3. Get the software. Required software points to the required software to download.

4. Configure the cloud dashboard. Configuring cloud dashboard describes dashboard customization.

5. Device registration. Device registration explains how to register a device into the Azure IoT Central.

6. Demo board setup. Board setup, wiring, and assembly explains how to stack, program, and wire the demo boards.

7. System power up. System powerup and operation illustrates the power-up sequence and operation.

Supplementary material for readers unfamiliar with the Azure IoT Central terminology or technology is provided in the appendix.

NXP Semiconductors

NXP EasyEVSE EV Charging Station Development Platform User Guide, Rev. 0, 18 March 2022

User Guide 3 / 64

Chapter 2

Solution overview

NXP EasyEVSE is a development platform that enables you to develop and run a simulated electric vehicle charge station with

a mutually authenticated and secure connection with the Microsoft Azure IoT Central.

Figure 1. EasyEVSE application

The EasyEVSE consists of the following blocks:

• Host controller: i.MX RT106x cross-over MCU

• Meter: KM3x metering MCU

• Security: SE050 secure element

• NFC: CLRC663 NFC frontend

• IoT connectivity: Microsoft Azure IoT Central

NXP Semiconductors

NXP EasyEVSE EV Charging Station Development Platform User Guide, Rev. 0, 18 March 2022

User Guide 4 / 64

Figure 2. EasyEVSE reference design block diagram

The EasyEVSE hardware is shown in Figure 3.

NXP Semiconductors

Solution overview

NXP EasyEVSE EV Charging Station Development Platform User Guide, Rev. 0, 18 March 2022

User Guide 5 / 64

Figure 3. EVSE hardware support

The controller block manages communication with the meter, NFC, security, and IoT block. It also supports a GUI interface to

monitor and manage the EasyEVSE.

Figure 4. EVSE graphical user interface running on i.MX RT106x

NXP Semiconductors

Solution overview

NXP EasyEVSE EV Charging Station Development Platform User Guide, Rev. 0, 18 March 2022

User Guide 6 / 64

The meter block processes the simulated instantaneous current injected to the vehicle and simulates its charging state.

Figure 5. Meter block

The NFC block reads the UID of NFC devices, such as NFC MIFARE cards.

Figure 6. NFC block

The security block safely stores EasyEVSE credentials used with the Azure IoT cloud and accelerates security operations.

NXP Semiconductors

Solution overview

NXP EasyEVSE EV Charging Station Development Platform User Guide, Rev. 0, 18 March 2022

User Guide 7 / 64

Figure 7. Security block

To simplify the start-up process, the plug-and-trust SE050 secure element is not implemented in this document.

However, it is provisioned and used in the EV Charging Station Development Platform User Manual.

NOTE

The IoT and connectivity block, which is the Azure IoT central application, receives, stores, and displays telemetry from the

EasyEVSE into a dashboard after the EasyEVSE is provisioned succesfully.

The EasyEVSE telemetry consists of variables relative to the electric vehicle charge. The telemetry is continuously sent to the NXP

sample dashboard (EasyEVSE dashboard) several times per minute.

NXP Semiconductors

Solution overview

NXP EasyEVSE EV Charging Station Development Platform User Guide, Rev. 0, 18 March 2022

User Guide 8 / 64

Figure 8. EasyEVSE dashboard

The EasyEVSE dashboard enables you to modify EasyEVSE properties in real time. It simulates a real application, where the

energy delivered and the tariff cost must be changed upon the grid demand.

NXP Semiconductors

Solution overview

NXP EasyEVSE EV Charging Station Development Platform User Guide, Rev. 0, 18 March 2022

User Guide 9 / 64

Figure 9. Update EVSE properties

The EasyEVSE dashboard enables you to send commands to the EasyEVSE, for example, the Terminate Charge

Cycle command.

Figure 10. EasyEVSE commands

To help with debugging, the EasyEVSE supports the output of log console over a serial terminal, enabling you to monitor its boot,

registration, and operations.

NXP Semiconductors

Solution overview

NXP EasyEVSE EV Charging Station Development Platform User Guide, Rev. 0, 18 March 2022

User Guide 10 / 64

Table des matières

Autres manuels NXP Semiconductors Microcontrôleur

NXP Semiconductors

NXP Semiconductors SE050 Instructions d'installation et d'utilisation

NXP Semiconductors

NXP Semiconductors UM108 Series Manuel utilisateur

NXP Semiconductors

NXP Semiconductors QN9080 Manuel utilisateur

NXP Semiconductors

NXP Semiconductors Freescale K22 Manuel utilisateur

NXP Semiconductors

NXP Semiconductors S32R372141EVB Manuel utilisateur

NXP Semiconductors

NXP Semiconductors A71CLARD-BA Manuel utilisateur

NXP Semiconductors

NXP Semiconductors UG10068 Manuel utilisateur

NXP Semiconductors

NXP Semiconductors MC68HC16Z1 Manuel utilisateur

NXP Semiconductors

NXP Semiconductors Freescale TWR-POS-K81 Manuel utilisateur

NXP Semiconductors

NXP Semiconductors MPC574xR Series Instructions d'installation et d'utilisation

NXP Semiconductors

NXP Semiconductors LPC800 Manuel utilisateur

NXP Semiconductors

NXP Semiconductors FRDM-KL28Z Manuel utilisateur

NXP Semiconductors

NXP Semiconductors AN10815 Instructions d'installation et d'utilisation

NXP Semiconductors

NXP Semiconductors P89LPC952 Manuel utilisateur

NXP Semiconductors

NXP Semiconductors OM2385 Manuel utilisateur

NXP Semiconductors

NXP Semiconductors P89LPC9321 UM10310 Manuel utilisateur

NXP Semiconductors

NXP Semiconductors TWR-KM34Z50M Manuel utilisateur

NXP Semiconductors

NXP Semiconductors Freescale Xtrinsic LFSTBEB865X Manuel utilisateur

NXP Semiconductors

NXP Semiconductors freescale K51 Series Manuel utilisateur

NXP Semiconductors

NXP Semiconductors LPC18xx series Manuel utilisateur

NXP Semiconductors

NXP Semiconductors LPC21 Series Manuel utilisateur

NXP Semiconductors

NXP Semiconductors LPC29 Series Manuel utilisateur

NXP Semiconductors

NXP Semiconductors A1006 Manuel utilisateur

NXP Semiconductors

NXP Semiconductors KL25 Series Manuel utilisateur

Manuels Microcontrôleur populaires d'autres marques

AMS

AMS AS7261 Demo Kit Manuel utilisateur

Novatek

Novatek NT6861 Manuel utilisateur

Espressif Systems

Espressif Systems ESP8266 SDK Guide de configuration

Nuvoton

Nuvoton ISD61S00 ChipCorder Mode d’emploi

STMicrolectronics

STMicrolectronics ST7 Assembler Linker Manuel utilisateur

Texas Instruments

Texas Instruments Chipcon CC2420DK Manuel utilisateur

Lantronix

Lantronix Intrinsyc Open-Q 865XR SOM Manuel utilisateur

NEC

NEC 78GK0S/K 1+ Series Instructions d'installation et d'utilisation

Mikroe

Mikroe SEMITECH N-PLC Click Instructions d'installation et d'utilisation

Intel

Intel Agilex Manuel utilisateur

Cypress

Cypress CY4607 HX2VL Manuel utilisateur

DIGITAL-LOGIC

DIGITAL-LOGIC MICROSPACE Manuel utilisateur

Texas Instruments

Texas Instruments TMS320F2837 D Series Manuel utilisateur

CYPRES

CYPRES CY14NVSRAMKIT-001 Manuel utilisateur

Texas Instruments

Texas Instruments INA-DUAL-2AMP-EVM Manuel utilisateur

Espressif Systems

Espressif Systems ESP8266EX Mode d'emploi

Abov

Abov AC33M8128L Manuel utilisateur

Laird

Laird BL654PA Manuel utilisateur