Nvidia TESLA C2050 Manuel utilisateur

TESLA™C/

COMPUTING PROCESSOR

INSTALLATION GUIDE

NVIDIA Tesla C2050/2070

TESLA C2050 INSTALLATION GUIDE

TABLE OF CONTENTS

Introduction 1

About This Guide 1

Minimum System Requirements 2

Unpacking 3

Equipment 3

Hardware Installation 5

Before You Begin 5

Tesla C2050/2070 Installation 5

Driver Installation 9

Windows Installation 9

Control Panel Set Up 14

Linux Installation 16

Verifying Linux Installation 19

References and Resources 21

Getting Driver Updates 21

Registration, Support and Warranty 23

Registering Your Tesla C2050/2070 Computing Board 23

Warranty and Support 23

Compliance and Certications 25



INTRODUCTION

The NVIDIA®Tesla™C2050/2070 Computing

Processor transforms your workstation to a personal

supercomputer by oering unprecedented

computing capabilities at 1/10th the cost of a

conventional CPU-only workstation. The NVIDIA

Tesla C2050/2070 Computing Processor supports

“must have” features for technical and enterprise

computing, including C++ support, ECC memory for

uncompromised accuracy and scalability, and 7X the

double precision performance compared to Tesla

10-series GPU computing products.

About This Guide

This installation guide discusses the installation and conguration of the

Tesla C2050/2070 Computing Processor.



INTRODUCTION

 Minimum System Requirements

Prior to unpacking your new Tesla C2050/2070, conrm that your system

meets all the system requirements for a smooth installation.

>Operating System

Microsoft Windows XP, Vista, Windows 7 (32-bit or 64-bit)

Linux 32-bit and 64-bit on:

Redhat Enterprise Linux 3.x, 4.x, 5.x

SUSE Linux Enterprise Desktop 11 and 10

OpenSUSE 11.1, 11.0, 10.3, 10.2, 10.1

Fedora 10, 9, 8, 7

Ubuntu 9.04, 8.10, 8.04, 7.10, 7.04

>Processor

Intel Pentium 4 or Xeon processor or higher

AMD Athlon processor or higher

>RAM

3GB recommended per Tesla C2050 and 6GB recommended per

Tesla C2070

>Graphics

Single DVI-I Dual Link

>PCI Express Slot

PCI Express x16 slot, Gen2 recommended but not required

>Power Consumption

238 W maximum power consumption

Power supply in the workstation typically need to have one 8-pin

power connector and one 6-pin power connector. Certain power

supplies may only need to have one 8-pin power connector. (Please

check with your system vendor for the power supply specications)



UNPACKING

Be sure to inspect each piece of equipment.

If anything is missing or damaged, contact

your supplier.

Equipment

The following equipment is included in the Tesla C2050/2070 box.

Installation CD

Contains this le (installation guide) and all the necessary

drivers to enable the Tesla C2050/2070. To keep your drivers

current, visit www.nvidia.com to download the latest

drivers.

Quick Start Guide

Contains basic hardware and software installation

instructions. Read carefully, and refer to the

Installation Guide on the CD for full installation

instructions and troubleshooting.

WELCOME

Registration Card

phone support. Take time to follow the instructions on

this card to register your product to take advantage of

customer support and warranty.



UNPACKING

Tesla C2050/2070 GPU Computing Processor

Installs into the PCI Express x16 slot in your computer.

DVI

connector

SLI

connector

disabled

Power connectors

Tesla 2050/2070 Computing Processor





HARDWARE INSTALLATIONS

Installing the Tesla C2050/2070 hardware involves

opening up your computer.

Note: All hardware must be installed prior to installation of

the drivers.

Before You Begin

If you have an NVIDIA graphics solution, either as a discrete card or

as on-board graphics on your motherboard, you will need to uninstall

the NVIDIA graphics software driver before installing your Tesla card.

Note: This does not apply to Linux based systems. It only

applies to Windows based systems.

Tesla C2050/2070 Installation

A computer system with an available PCI Express ×16 slot is required for

the Tesla C2050/2070. For the best system bandwidth between the host

processor and the Tesla C2050/2070, it is recommended (but not required)

that the Tesla C2050/2070 be installed in a PCI Express ×16 Gen2 slot.

Because there are so many dierent computer systems on the market,

the installation procedure for the Tesla C2050/2070 can vary from system

to system. Use the following instructions as a guideline and consult the

documentation for clarication of computer specic procedures.



HARDWARE INSTALLATIONS

 Note: It is important that all power to the computer be

removed (unplugged) before you install the computing board.

You must also discharge your body’s static electricity before

handling sensitive components. Simply touch a grounded

surface before beginning.

Note: To simplify reconnections, label cables as they are

disconnected.

1 Turn o your computer and monitor and disconnect the power cord at

the outlet or at the back of your system (depending on the system).

2 Open your computer chassis (refer to your system documentation

for details).

3 Remove the slot bracket for the two adjacent slots, if they are still covered.

The Tesla C2050/2070 computing board is a dual-slot board and will take up

two (2) slots. Save any hardware (such as screws) to use to anchor the Tesla

C2050/2070 computing board after it is seated properly.rail installation.

4 Connect the 8-pin power connector and the 6-pin power connector from

The Tesla C2050/2070 requires

two PCI Express x16 slots.

Autres manuels pour TESLA C2050

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Nvidia Matériel informatique

Nvidia

Nvidia Jetson AGX Orin Series Manuel d'installation et d'exploitation

Nvidia

Nvidia DGX A100 Manuel utilisateur

Nvidia

Nvidia Mellanox ConnectX-5 Manuel utilisateur

Nvidia

Nvidia TESLA C2075 Manuel utilisateur

Nvidia

Nvidia FX4500 - Apple MAC Pro QUADRO FX 4500 Video Card... Guide de démarrage rapide

Nvidia

Nvidia JETSON XAVIER NX Mode d’emploi

Nvidia

Nvidia ForceWare Quadro FX 4000 SDI Manuel utilisateur

Nvidia

Nvidia nForce 680I LT SLI Instructions d'utilisation

Nvidia

Nvidia DGX-2 SYSTEM Manuel utilisateur

Nvidia

Nvidia DGX H100 Manuel utilisateur

Nvidia

Nvidia GeForce FX Series Manuel utilisateur

Nvidia

Nvidia PCI Express Series Manuel utilisateur

Nvidia

Nvidia Computer Manuel utilisateur

Nvidia

Nvidia TESLA M2050 Manuel utilisateur

Nvidia

Nvidia TESLA K10 Manuel utilisateur

Nvidia

Nvidia TESLA K20 Manuel utilisateur

Nvidia

Nvidia BlueField-2 BF2500 Manuel utilisateur

Nvidia

Nvidia TESLA C2075 Manuel utilisateur

Nvidia

Nvidia Clara AGX Manuel utilisateur

Nvidia

Nvidia Mellanox ConnectX-5 Manuel

Nvidia

Nvidia JETSON TX2 Manuel utilisateur

Nvidia

Nvidia ConnectX-7 Manuel utilisateur

Nvidia

Nvidia Quadro Manuel utilisateur

Nvidia

Nvidia GeForce2 Ti SP6600Ti Manuel utilisateur

Manuels Matériel informatique populaires d'autres marques

EMC2

EMC2 VNX Series Manuel du propriétaire

Panasonic

Panasonic DV0PM20105 Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuel utilisateur

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuel utilisateur

Raidon

Raidon iT2300 Manuel utilisateur

National Instruments

National Instruments PXI-8186 Manuel utilisateur

Hauppauge

Hauppauge WinTV-HVR-2250 Manuel utilisateur

Kontron

Kontron CP6002 Manuel utilisateur

Manhattan

Manhattan 702843 Manuel utilisateur

Aphex

Aphex 230 Manuel utilisateur

AMD

AMD Phenom II Manuel d'exploitation

Intel

Intel NUC 12 Pro Manuel utilisateur

dbx

dbx Zone Pro 1260 Manuel utilisateur

Galaxy

Galaxy GHDX2-2430S-24F4D Manuel utilisateur

Intel

Intel AXXRMFBU4 Manuel utilisateur

Kontron

Kontron DIMM-PC/MD Manuel utilisateur

ST X-NUCLEO-SAFEA1B Mode d'emploi

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuel utilisateur