Nvidia TESLA C2075 Manuel utilisateur

TESLA™C

COMPUTING PROCESSOR

INSTALLATION GUIDE

NVIDIA Tesla C2075

TESLA C2075 INSTALLATION GUIDE



TABLE OF CONTENTS

Introduction 1

About This Guide 1

Minimum System Requirements 2

Unpacking 3

Equipment 3

Hardware Installation 5

Tesla C2075 Installation 5

Driver Installation 8

Windows Installation 8

Verifying Windows Installation 14

Linux Installation 15

Verifying Linux Installation 18

References and Resources 19

Getting Driver Updates 19

Registration, Support and Warranty 20

Registering Your Tesla C2075 Computing Board 20

Warranty and Support 20

Compliance and Certiﬁcations 21





INTRODUCTION

With many mainstream applications now taking

advantage of the GPU computing found in the

NVIDIA®Tesla™C2075, leading-edge customers

are producing breakthroughs in their industries

by achieving better results in a shorter period

of time. Adding the NVIDIA Tesla C2075 to an

industry-standard workstation and conﬁguring

it with an NVIDIA Quadro Professional Graphics

Solution enables performance scaling across a

wide range of professional applications.

About This Guide

This installation guide discusses the installation and conﬁguration of

the Tesla C2075 Computing Processor.



INTRODUCTION

 Minimum System Requirements

Prior to unpacking your new Tesla C2075, conﬁrm that your system

meets all the system requirements for a smooth installation.

>Operating System

zzMicrosoft Windows XP, Vista, Windows 7 (32-bit or 64-bit)

zzLinux 32-bit and 64-bit on:

zzRedhat Enterprise Linux 3.x, 4.x, 5.x

zzSUSE Linux Enterprise Desktop 11 and 10

zzOpenSUSE 11.1, 11.0, 10.3, 10.2, 10.1

zzFedora 10, 9, 8, 7

zzUbuntu 9.04, 8.10, 8.04, 7.10, 7.04

>Processor

zzIntel Pentium 4 or Xeon processor or higher

zzAMD Athlon processor or higher

>RAM

zz6 GB recommended per Tesla C2075

>PCI Express Slot

zzPCI Express x16 slot, Gen2 recommended but not required

>Power Consumption

zz215 W maximum power consumption

zzPower supply must have either a single 8-pin connector or

two 6-pin power connectors. (It is ok to connect both an 8-pin

and a 6-pin connector to the board, but not required)





UNPACKING

Be sure to inspect each piece of equipment.

If anything is missing or damaged, contact

your supplier.

Equipment

The following equipment is included in the Tesla C2075 box.

Installation CD

Contains this ﬁle (installation guide), Linux drivers,

and links to additional information on the Tesla C-series

product. To keep your drivers current, visit

www.nvidia.com/drivers to download the latest drivers.

Quick Start Guide

Contains basic hardware and software installation

instructions. Read carefully, and refer to the

Installation Guide on the CD for full installation

instructions and troubleshooting.

WELCOME

Registration Card

phone support. Take time to follow the instructions on

this card to register your product to take advantage of

customer support and warranty.



UNPACKING

Tesla C2075 GPU Computing Processor

Installs into the PCI Express x16 slot in your computer.

DVI

connector

SLI

and Framelock

connectors

disabled

Power connectors

Tesla C2075 Computing Processor







HARDWARE INSTALLATIONS

Installing the Tesla C2075 hardware involves

opening up your computer.

Note: All hardware must be installed prior to installation of

the drivers.

Tesla C2075 Installation

A computer system with an available PCI Express ×16 slot is required

for the Tesla C2075. For the best system bandwidth between the host

processor and the Tesla C2075, it is recommended (but not required)

that the Tesla C2075 be installed in a PCI Express ×16 Gen2 slot.

Because there are so many different computer systems on the

market, the installation procedure for the Tesla C2075 can vary

from system to system. Use the following instructions as a guideline

and consult the system documentation for clariﬁcation of computer

speciﬁc procedures.

Note: It is important that all power to the computer be

removed (unplugged) before you install the computing board.

You must also discharge your body’s static electricity before

handling sensitive components. Simply touch a grounded

surface before beginning.

Note: To simplify reconnections, label cables as they are

disconnected.



HARDWARE INSTALLATIONS



1 Turn off your computer and monitor and disconnect the power cord at

the outlet or at the back of your system (depending on the system).

2 Open your computer chassis (refer to your system documentation

for details).

3 Remove the slot bracket for the two adjacent slots, if they are still

covered. The Tesla C2075 computing board is a dual-slot board and

will take up two (2) slots. Save any hardware (such as screws) to use

to anchor the Tesla C2075 computing board after it is seated properly.

4 Connect the 8-pin connector or the two 6-pin connectors from the

power supply to the 8-pin and 6-pin connectors on the board. (it is ok

to connect both an 8-pin and a 6-pin connector to the board, but not

required)

The Tesla C2075 will occupy

two slots.



HARDWARE INSTALLATIONS

5 Reinstall the computer cover and any cables that were

removed earlier.

Note: If you are using one 8-pin power connector, you must

ensure that the power supply can drive enough power

through the 8-pins to the power connector. (up to 150W

through a single 8-pin connector)

6-pin power connectors

Connect one (1) 6-pin PCI Express

power connector on the edge of the

board

8-pin power connector

Connect one (1) 8-pin OR

one (1) 6-pin PCI Express

power connector on the

edge of the board



Autres manuels pour TESLA C2075

Table des matières

Autres manuels Nvidia Matériel informatique

Nvidia

Nvidia JETSON NANO Instructions d'installation

Nvidia

Nvidia Quadro M6000 Sync Manuel utilisateur

Nvidia

Nvidia TESLA M2050 Manuel utilisateur

Nvidia

Nvidia Mellanox ConnectX-6 MCX654106A-ECAT Manuel utilisateur

Nvidia

Nvidia Tesla S2050 Manuel utilisateur

Nvidia

Nvidia DGX A100 Manuel utilisateur

Nvidia

Nvidia JETSON AGX XAVIER Manuel utilisateur

Nvidia

Nvidia Tesla C870 Manuel utilisateur

Nvidia

Nvidia Mellanox ConnectX-6 Dx Series Manuel utilisateur

Nvidia

Nvidia Computer Manuel utilisateur

Nvidia

Nvidia Jetson AGX Xavier Series Mode d’emploi

Nvidia

Nvidia nForce 680I LT SLI Instructions d'utilisation

Nvidia

Nvidia Jetson TX2 NX Manuel utilisateur

Nvidia

Nvidia Mellanox ConnectX-6 Dx Series Manuel utilisateur

Nvidia

Nvidia TESLA K20 Manuel utilisateur

Nvidia

Nvidia Mellanox ConnectX-5 Manuel utilisateur

Nvidia

Nvidia JETSON XAVIER NX Mode d’emploi

Nvidia

Nvidia GEFORCE RTX 4090 Manuel utilisateur

Nvidia

Nvidia Quadro Manuel utilisateur

Nvidia

Nvidia AVerMedia D133 Series Manuel utilisateur

Nvidia

Nvidia SP5200BLT Manuel utilisateur

Nvidia

Nvidia Mellanox ConnectX-5 Manuel utilisateur

Nvidia

Nvidia DGX A100 Manuel utilisateur

Nvidia

Nvidia Geforce PCI-Express Series Manuel utilisateur

Manuels Matériel informatique populaires d'autres marques

EMC2

EMC2 VNX Series Manuel du propriétaire

Panasonic

Panasonic DV0PM20105 Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuel utilisateur

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuel utilisateur

Raidon

Raidon iT2300 Manuel utilisateur

National Instruments

National Instruments PXI-8186 Manuel utilisateur

Hauppauge

Hauppauge WinTV-HVR-2250 Manuel utilisateur

Kontron

Kontron CP6002 Manuel utilisateur

Manhattan

Manhattan 702843 Manuel utilisateur

Aphex

Aphex 230 Manuel utilisateur

AMD

AMD Phenom II Manuel d'exploitation

Intel

Intel NUC 12 Pro Manuel utilisateur

dbx

dbx Zone Pro 1260 Manuel utilisateur

Galaxy

Galaxy GHDX2-2430S-24F4D Manuel utilisateur

Intel

Intel AXXRMFBU4 Manuel utilisateur

Kontron

Kontron DIMM-PC/MD Manuel utilisateur

ST X-NUCLEO-SAFEA1B Mode d'emploi

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuel utilisateur