Nortel BayStack 100-S Manuel utilisateur

Wall Mounting the Instant Internet 100-S Unit

*211487-A*

You can mount the BayStack Instant Internet 100-S unit on any drywall, wood, or cement wall that is

at least 0.39 inches (10 mm) thick and is capable of supporting the combined weight of the unit and

attached cables (approximately 11 pounds or 5 kg).

A set of brackets, self-tapping (3.5x16) drywall screws, and (3x18) plastic expansion lugs (Figure 1)

has been included with the Instant Internet 100-S unit. You will need a Phillips screwdriver, which is

not included with the unit. If you are mounting the unit on a drywall or cement wall, you will need a

drill and a 1/4-inch drill bit, which are also not included with the unit. If you are mounting the unit

on a wood wall, you will need a #6 wood screw (not included) that is long enough to penetrate the

wood by at least 1/2-inch.

Figure 1 provides a template for you to use as a guide for placing the screws in the wall.

Figure 1 Template for correct placement of holes in the wall

To use this template:

1Trace the illustration onto another piece of paper.

2Cut out the tracing, making sure to cut out the holes provided for the screws.

3Place the tracing against the wall where you would like to mount the Instant Internet 100-S unit.

4Using a pencil, trace inside the holes that you have cut out to mark where the screws should go.

5Remove the tracing and place the screws where you have marked.

10119EA

*211487-A*

Preparing a drywall or a cement wall for mounting

To mount your Instant Internet 100-S on a drywall or cement wall, you must first prepare the wall.

To prepare a drywall or cement wall for mounting the Instant Internet 100-S unit:

1Use a drill and a 1/4-inch (0.63~0.65 mm) drill bit to drill four 1 1/16-inch (27.0 mm) deep holes

where you marked the wall with the template.

2Insert each of the plastic expansion lugs included with the unit into the four newly drilled holes.

3Repeat steps 1 & 2 for the other mounting bracket.

Mounting the Instant Internet 100-S on a wall

To mount the Instant Internet 100-S on a wood wall or a prepared drywall or cement wall:

1Place the bracket against the wall where you marked the wall with the template.

Align the holes in the bracket with the expansion lugs if you are mounting on a drywall or

cement wall.

2Insert each of the four screws through the holes in the bracket and into the wood wall or the

expansion lugs.

To mount your Instant Internet 100-S on a wood wall, use only wood screws; do not use the

plastic expansion lugs.

3Screw in the screws.

4Repeat steps 1, 2, & 3 for the other mounting bracket.

Figure 2 shows the components and illustrates the combined procedures for preparing a drywall or

cement wall and for mounting the unit on the wall.

Figure 2 Components for mounting the BayStack Instant Internet 100-S unit on a wall

For more information on mounting your BayStack Instant Internet 100-S unit, refer to Setting Up the

BayStack Instant Internet 100-S Unit (part number 209374-A).

LEGEND

1 Hole drilled in the wall 3 Wall mount bracket

2 Plastic expansion lug 4 Self-tapping drywall screw or #6 wood screw

10095EA

12 3 4

Autres manuels pour BayStack 100-S

6

Table des matières

Autres manuels Nortel Matériel réseau

Nortel

Nortel 5000 Mode d’emploi

Nortel

Nortel SONET AccessNode Manuel utilisateur

Nortel

Nortel Passport 4430 Manuel utilisateur

Nortel

Nortel BayStack 100-S Manuel de service

Nortel

Nortel Meridian Manuel du produit

Nortel

Nortel Meridian 1 Option 11C Compact Manuel d'utilisation et d'entretien

Nortel

Nortel Passport 8683POS Mode d’emploi

Nortel

Nortel 2230l 2231 Manuel utilisateur

Nortel

Nortel BayStack 100-S Manuel utilisateur

Nortel

Nortel Optical Multiservice Edge 6130 Manuel technique

Nortel

Nortel 5399 Manuel utilisateur

Nortel

Nortel 2340 Manuel utilisateur

Nortel

Nortel AccessNode 2016 Manuel utilisateur

Nortel

Nortel Passport 8000 Series Instructions de montage

Nortel

Nortel BCM50 2.0 Manuel utilisateur

Nortel

Nortel 9110 Mode d’emploi

Nortel

Nortel BayStack 450 Switch Manuel utilisateur

Nortel

Nortel R2MFC Manuel de l'opérateur

Nortel

Nortel BayStack 600 Series Mode d’emploi

Nortel

Nortel Meridian 1 Option 11C Manuel technique

Nortel

Nortel 1010 Series Mode d’emploi

Nortel

Nortel Remote Office 9150 Mode d’emploi

Nortel

Nortel 2340 Manuel utilisateur

Nortel

Nortel 1001t Manuel utilisateur

Manuels Matériel réseau populaires d'autres marques

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manuel utilisateur

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manuel utilisateur

Yudor

Yudor YDS-16 Manuel utilisateur

D-Link

D-Link ShareCenter DNS-320L Manuel utilisateur

Samsung

Samsung ES1642dc Instructions d'utilisation

Honeywell Home

Honeywell Home LTEM-PV Instructions de montage

evertz

evertz 7700 Series Manuel utilisateur

D-Link

D-Link ShareCenter DNS-343 Manuel utilisateur

Asante

Asante AsanteBridge 1012 Manuel utilisateur

FireBrick

FireBrick FB2700 Manuel utilisateur

Audiovox Electronics

Audiovox Electronics ARWH2T Manuel utilisateur

ADC

ADC DSX-1 Manuel

NetComm

NetComm NF2 Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 5620 Manuel utilisateur

Dell EMC

Dell EMC XC6420 Series Manuel utilisateur

Lanner

Lanner NCA-1020A Manuel utilisateur

Allied Telesis

Allied Telesis AT-TN121-A Manuel utilisateur

Arista

Arista CCA-ETM-Q12 Manuel utilisateur