Norac UC5 Topcon X30 Manuel utilisateur
Hagie
(STS 2010+)
Installation Manual
HG03
Printed in Canada
Copyright 2008 by NORAC Systems International Inc.
Reorder P/N: UC5-BC-HG03-INST Rev O (Hagie STS 2010+)
NOTICE: NORAC Systems International Inc. reserves the right to improve products and their specifications without notice and
without the requirement to update products sold previously. Every effort has been made to ensure the accuracy of the information
contained in this manual. The technical information in this manual was reviewed at the time of approval for publication.
Contents
1Introduction................................................................................................................. 1
2General UC5 System Layout..................................................................................... 2
3Kit Parts ....................................................................................................................... 3
4Pre-Install Checklist ................................................................................................... 7
5Ultrasonic Sensor Installation ................................................................................... 8
6Roll Sensor Installation ............................................................................................ 13
7Module Installation ................................................................................................... 15
8Connecting the Sensors to the CANbus................................................................ 21
9Hydraulic Installation ............................................................................................... 22
10 Software Setup.......................................................................................................... 25
11 Cable Drawings ......................................................................................................... 26
1
1Introduction
Congratulations on your purchase of the NORAC UC5 Spray Height Control System. This
system is manufactured with top quality components and is engineered using the latest
technology to provide operating reliability unmatched for years to come.
When properly used the system can provide protection from sprayer boom damage, improve
sprayer efficiency, and ensure chemicals are applied correctly.
Please take the time to read this manual completely before attempting to install the system. A
thorough understanding of this manual will ensure that you receive the maximum benefit from
the system.
Your input can help make us better! If you find issues or have suggestions regarding the parts
list or the installation procedure, please don’t hesitate to contact us.
Every effort has been made to ensure the accuracy of the information contained in
this manual. All parts supplied are selected to specially fit the sprayer to facilitate
a complete installation. However, NORAC cannot guarantee all parts fit as
intended due to the variations of the sprayer by the manufacturer.
Please read this manual in its entirety before attempting installation.
2
2General UC5 System Layout
Figure 1 illustrates the general layout of the UC5 system components:
Figure 1: General UC5 System Layout
3
3Kit Parts
3.1 Kit Overview
Figure 2: HG03 System Parts
4
3.2 Hydraulic Plumbing
Figure 3: HG03 Hydraulic Plumbing
5
3.3 UC5-CAB-HG03/HG06 – HG03/HG06 Cab Kit Parts List
Item Part Number Name Quantity
C01 43260-13 CABLE UC5 NETWORK HAGIE STS CAB TO BULKHEAD 1
C02 43260-14 CABLE UC5 NETWORK HAGIE STS BULKHEAD TO VIM 1
C03 43260-11 CABLE UC5 NETWORK HAGIE STS CHASSIS TO BOOM DISCONNECT 1
C20 43260-10 CABLE UC5 INTERFACE CAN BUS (3 PIN DT) 36IN 1
C21 43764-01 UC5 NETWORK ADAPTER CAN LINES ONLY 1
C30 43250-16 CABLE UC5 BATTERY 6-PIN DT (ECU AND SIGNAL POWER) 1
E01 43710 UC5 CONTROLLER MODULE 2
P02A 106339 CONN DEUTSCH DT04 B KEY 12 PIN FLANGED RECEPTACLE 1
P02B 106035 UC5 NETWORK 12 PIN PLUG (A-KEY) 1
3.4 UC5-BOOM-HG03 – HG03 Boom Kit Parts List
Item Part Number Name Quantity
B10 44728 MOUNTING BRACKET COMPLETE UC4 BREAKAWAY EXTENDED 2
B11 44743 MOUNTING BRACKET MAIN LIFT SENSOR UC4 PLUS 1
B12 44695-11 MOUNTING BRACKET BREAKAWAY ADAPTER UC3 SENSOR NITRO/HAGIE 2
C04 43260-12 CABLE UC5 NETWORK HAGIE STS BOOM DISCONNECT TO 8-WAY 1
C05 43210-01 CABLE UC5 NETWORK 18 AWG 1M 1
C06 43210-05 CABLE UC5 NETWORK 18 AWG 5M 1
C07 43210-10 CABLE UC5 NETWORK 18 AWG 10M 2
C08 43210-07 CABLE UC5 NETWORK 18 AWG 7M 2
E04 43741* UC5 ROLL SENSOR VER. 2 2
E05 43750 UC5 ULTRASONIC SENSOR 3
E10 43760 UC5 NETWORK COUPLER 3-WAY 2
E11 43765 UC5 NETWORK COUPLER 8-WAY 1
E12 43764 UC5 NETWORK COUPLER 2-WAY 1
E20 43764T UC5 NETWORK COUPLER 2-WAY WITH TERMINATOR 2
M02 UC5-BC-HG03-INST MANUAL INSTALLATION UC5 HAGIE (STS 2010+) 1
P03 106162 UC5 NETWORK 6 PIN PLUG MOLDED 5
* For systems purchased BEFORE October 1, 2011, the roll sensor part number is 43740.
6
3.5 UC5-HYD-HG03 – HG03 Hydraulics Kit Parts List
Item Part Number Name Quantity
C10 43230-04 CABLE UC5 VALVE 2PIN DT TO 2PIN DT 4
C11 43230-06 CABLE UC5 VALVE 2PIN DT TO 2PIN DT (L = 36") 3
E02 43720 UC5 VALVE MODULE 1
H10 44865-15 HYDRAULICS FITTING KIT - HG3 1
P01 106034 UC5 NETWORK 2 PIN PLUG 1
P02 106027 UC5 NETWORK 2 PIN RECEPTACLE (PLUGGED) 3
V01 44963D VALVE BLOCK ASSEMBLY 2 STATION CC/LS PROP DT 4 BOLT 1
3.6 Hydraulic Fitting Kit Details (P/N: 44865-15)
Item Part Number Name Quantity
Picture
F04 103071 MALE 90 DEGREE ADAPTER - 8MB 6MJ90 2
F05 103312 MALE ADAPTER - 6MB-6MJ 6
F08 44928 ORIFICE INSERT .026 IN ONE WAY 2
6 M B - 6 M OR X 90
SIZE IN
1/16TH'S
GENDER: MALE
OR FEMALE
90° ANGLE
SWIVEL
TYPE
GENDER
SIZE
TYPE:
B - ORB
J - JIC
OR - FLAT
FACE
P - PIPE
Fitting Name
Example:
The use of dielectric grease is not recommended on any NORAC electrical
connections.
To ensure all stainless steel hardware does not gall or seize apply a light coating of
the supplied Permatex Anti-seize grease to all threaded parts upon installation.
Permatex Anti-seize lubricant is preferred, but other similar anti-seize products
may be used.
7
4Pre-Install Checklist
The pre-install checklist is necessary to check the existing sprayer functionality before the
installation.
1. Unfold the sprayer over a flat, unobstructed area (i.e. no power lines…etc.).
2. Ensure all boom-fold operations are functional (place a check mark in boxes below).
3. Bring engine to field-operational RPM and record below.
4. Record the time (seconds) it takes for a full stroke for all boom functions. To ensure
repeatable measurements, take the average of 3 trials.
5. Not all sprayers will have the functions listed below in Figure 4.
Ensure the boom has sufficient travel so it does not contact the ground during
these tests.
Figure 4: Pre-Install Boom Speeds
Autres manuels pour UC5 Topcon X30
55
Table des matières
Autres manuels Norac Système de contrôle
Norac
Norac UC5 Topcon X30 Manuel utilisateur
Norac
Norac UC5 ECHO Display Kit Manuel utilisateur
Norac
Norac UC4 Plus Rogator 64 Series Manuel utilisateur
Norac
Norac UC4 Plus Rogator 64 Series Manuel utilisateur
Norac
Norac U5 Manuel utilisateur
Norac
Norac UC5 HD12 Manuel utilisateur
Norac
Norac John Deere 4720 Manuel utilisateur
Norac
Norac UC5 Rogator 600 Manuel utilisateur
Norac
Norac UC7 Manuel utilisateur
Norac
Norac UC5 CAN BUS Case IH 20 Series Manuel utilisateur
Norac
Norac UC5 MAX Manuel utilisateur
Norac
Norac UC4.5 Manuel utilisateur
Norac
Norac UC7 Manuel utilisateur
Norac
Norac UC4+ Manuel utilisateur
Norac
Norac UC5 Topcon X30 Guide de démarrage rapide
Norac
Norac UC4.5 Manuel utilisateur
Norac
Norac UC4.5 Manuel utilisateur
Norac
Norac UC4+ Manuel utilisateur
Norac
Norac UC4.5 Manuel utilisateur
Norac
Norac UC7 Manuel utilisateur
