Norac UC4 Plus Rogator 64 Series Manuel utilisateur
John Deere 4700, 4710, 4720
Installation Manual
Spray Height Control System
Improving the competitiveness of Industry and Agriculture
throu
g
h Precision Measurement
Printed in Canada
Copyright 2005-08 by NORAC Systems International Inc.
Reorder P/N: UC4+BC+JD7-INST Rev K (John Deere 4700, 4710, 4720)
NOTICE
NORAC Systems International Inc. reserves the right to improve products and their specifications without notice and without
the requirement to update products sold previously. Every effort has been made to ensure the accuracy of the information
contained in this manual. The technical information in this manual was reviewed at the time of approval for publication.
TABLE OF CONTENTS
1INTRODUCTION..................................................................................................................................1
2GENERAL SYSTEM DESCRIPTION ..................................................................................................2
3PARTS LISTS ......................................................................................................................................4
4INSTALLATION PROCEDURE...........................................................................................................9
4.1EXISTING SYSTEM CHECK................................................................................................................9
4.2BOOM SPEED TEST .........................................................................................................................9
4.3WING SENSOR INSTALLATION ........................................................................................................11
4.4MAIN LIFT SENSOR INSTALLATION .................................................................................................14
4.5ROLL SENSOR INSTALLATION ........................................................................................................15
4.5.1Boom Roll Sensor Mounting ...............................................................................................17
4.5.2Chassis Roll Sensor Mounting............................................................................................17
4.5.3Inverted Roll Sensor Mounting............................................................................................18
4.5.4Temperature Probe.............................................................................................................18
4.6HYDRAULIC INSTALLATION.............................................................................................................19
4.6.1Valve Assembly...................................................................................................................19
4.6.2Valve Mounting....................................................................................................................20
4.6.3Hydraulic Plumbing .............................................................................................................21
4.7ELECTRICAL INSTALLATION ...........................................................................................................26
4.8COMPLETING THE INSTALLATION....................................................................................................31
5ELECTRICAL REFERENCE – CABLE DRAWINGS........................................................................32
5.1ITEM C01: 44662B-40 –CABLE SENSOR TRUNK...........................................................................32
5.2ITEM C02: 44668 –CABLE SENSOR BRANCH ................................................................................32
5.3ITEM C02B: 44664 -CABLE UC4 CAN NODE DUAL......................................................................33
5.4ITEM C03: 44656D –CABLE VALVE VARIABLE RATE DT ...............................................................34
5.5ITEM C04: 44651 –CABLE VALVE EXTENSION...............................................................................35
5.6ITEM C10: 44650-14 –CABLE UC4 POWER BOOM CONTROL JOHN DEERE....................................36
5.7ITEM C12: 44658-01 –CABLE UC4 VALVE BC JD....................................................................37
6APPENDIX A - INTERFACE CABLE MODIFICATION PROCEDURE ............................................38
1
1INTRODUCTION
Congratulations on your purchase of the NORAC UC4+ Spray Height Control System. This
system is manufactured with top quality components and is engineered using the latest
technology to provide operating features and reliability unmatched for years to come.
When properly used the system can provide protection from sprayer boom damage, improve
sprayer efficiency, and ensure chemicals are applied correctly.
Please take the time to read this manual completely before attempting to install the system. A
thorough understanding of this manual will ensure that you receive the maximum benefit from
the system.
YOUR INPUT CAN HELP MAKE US BETTER! If you find issues or have
suggestions regarding the parts list or the installation procedure, please don’t
hesitate to contact us.
2
2GENERAL SYSTEM DESCRIPTION
Figure 1 depicts the general system layout of the UC4+ Spray Height Control System.
Figure 1: System Components and General Location
NOTICE:
Every effort has been made to ensure the
accuracy of the information contained in
this manual. All parts supplied are selected
specially to fit the sprayer to facilitate a
complete installation. However, NORAC
cannot guarantee all parts fit as intended
due to the variations of the sprayer by the
manufacturer. Please read this manual
in its entirety before attempting
installation.
ATTENTION:
When installing the UC4+ Spray Height
Control system please be aware that at a
point in the installation your sprayer booms
will be inoperative until the installation is
complete. Any installation procedure
requiring boom movement will need
to be done first. Once the hydraulics
have been disconnected you must complete
the electrical installation before the booms
become operative.
4
3PARTS LISTS
The parts that come with your UC4+ Spray Height Control System are listed in Table 1. The item
number on the left side of this table references each part.
Please ensure that all parts in your kit are present before proceeding with your installation.
Table 1: John Deere 4720 Spray Height Control System Parts
Item Part Number Name Quantity
B05 44706-01 KIT CABLE TIE BLACK 10 PCS 21 IN 150 PCS 7.5 IN 1
B16 105415 CLAMP EXHAUST 2IN PLATED 4
B20 44971 SENSOR MOUNTING BRACKET LOW PROFILE 16GA 2
B21 44973 SENSOR MOUNTING BRACKET LOW PROFILE 16 GA LARGE FLANGE 1
C01 44662B-40 CABLE UC4 SENSOR TRUNK AMPF TO AMPF BLACK STANDARD 40FEET 1
C02 44668 CABLE UC4 SENSOR BRANCH 1 AMP RECEPT 3 AMP PLUG BC 1
C02B 44664 CABLE UC4 CAN NODE DUAL 1
C03 44656D CABLE VALVE VARIABLE RATE DT 1
C04 44651 CABLE VALVE EXTENSION 1
C10 44650-14 CABLE POWER UC4 BOOM CONTROL JOHN DEERE 1
C12 44658-01 CABLE UC4 VALVE BC JD 1
E01 4461BC+ UC4 PLUS BOOM CONTROL PANEL 1
E02 44631 UC4 ULTRASOUND SENSOR 3
E03 45000* UC4 PLUS ROLL SENSOR W TEMPERATURE PROBE VER. 2 1
E04 45001* UC4 PLUS ROLL SENSOR VER. 2 1
H02 44863-23 HOSE ASSEMBLY 122R2-06 32 IN L 6FORX 6FORX 2
H06 44862-05 HOSE ASSEMBLY 122R2-04 144 IN L 4FORX 4FORX 1
H20 44865-19 HYDRAULICS FITTING KIT - JD7 1
M01 446BC+MAN7 OPERATOR MANUAL UC4+ SPRAY HEIGHT CONTROL 1
M10 UC4+BC+JD7-INST MANUAL INSTALLATION UC4+ JOHN DEERE 4720 1
V01 44963D VALVE BLOCK ASSEMBLY 2 STATION CC/LS PROP DT 4 BOLT 1
* For systems purchased BEFORE October 1, 2011, the roll sensor part numbers are 44641 and 44642.
5
Table 2: 44865-19 - Hydraulics Fittings Kit Details
Item Part Number Name Quantity
Picture
F02 104691 TEE ADAPTER - 4FORXR 4MORT 1
F03 104586 TEE ADAPTER - 6FORXR 6MORT 3
F04 105226 MALE TO FEMALE ADAPTER - 4MOR 6FORX 1
F05 44917 MALE ADAPTER - 6MB-6MOR MACHINED ORB 4
F06 104693 MALE ADAPTER - 4MOR 4MB 1
F07 44916 MALE ADAPTER - 6MB-4MOR MACHINED ORB 4
F08 44928 ORIFICE INSERT .047 IN ONE WAY 4
F09 103381 PLUG - 4MBP 4
F15 105500 SETSCREW 1/4X3/8 1
6 M B - 6 M OR X 90
SIZE IN
1/16TH'S
GENDER: MALE
OR FEMALE
90° ANGLE
SWIVEL
TYPE
GENDER
SIZE
TYPE:
B - ORB
J - JIC
OR - FLAT
FACE
P - PIPE
Fitting Name
Example:
6
Table 3: Additional Parts
Item Part Number Packed with: Name Quantity
Picture
M13 104557 44650-14 (C10) RUBBER GROMMET 1
M14 104314 44658-01 (C12) 6 WAY SHROUD (KEYED A&F) 1
M15 104315 44658-01 (C12) 6 WAY TOWER (KEYED A&F) 1
M16 104302 44651 (C04) 6 WAY SHROUD 1
The use of dielectric grease is not recommended on any NORAC electrical connections.
To ensure all stainless steel hardware does not gall or seize apply a light coating of the
supplied Permatex Anti-seize grease to all threaded parts upon installation. Permatex
Anti-seize lubricant is preferred, but other similar anti-seize products may be used.
7
The parts that come with your UC4+ System are shown below in their general installation
configuration.
Figure 2: UC4+ Spray Height Control system Components
8
Figure 3: Hydraulic Plumbing Schematic
Autres manuels pour UC4 Plus Rogator 64 Series
5
Table des matières
Autres manuels Norac Système de contrôle
Norac
Norac UC4 Total Control Manuel utilisateur
Norac
Norac UC5 Active Roll Control Manuel utilisateur
Norac
Norac UC4+ Manuel utilisateur
Norac
Norac UC5 HD12 Manuel utilisateur
Norac
Norac UC4.5 Manuel utilisateur
Norac
Norac UC4.5 Manuel utilisateur
Norac
Norac UC5 Can Bus Manuel utilisateur
Norac
Norac UC7 Manuel utilisateur
Norac
Norac UC4+ Manuel utilisateur
Norac
Norac UC4 Total Control Manuel utilisateur
Norac
Norac UC4.5 Manuel utilisateur
Norac
Norac UC4.5 Manuel utilisateur
Norac
Norac UC4+ Manuel utilisateur
Norac
Norac UC5 Topcon X30 Manuel utilisateur
Norac
Norac UC4.5 Manuel utilisateur
Norac
Norac UC5 Topcon X30 Manuel utilisateur
Norac
Norac UC5 Topcon X30 Manuel utilisateur
Norac
Norac UC5 Topcon X30 Manuel utilisateur
Norac
Norac UC4 Total Control Manuel utilisateur
Norac
Norac UC4+ Manuel utilisateur
