Njoy Cadu Series Manuel utilisateur

Cadu Series User Manual

Manual de ulizare

UPCMTLS665TCAAZ01B

UPCMTLS685TCAAZ01B

UPCMTLS610HCAAZ01B

UPCMTLS615HCAAZ01B

UPCMTLS620HCAAZ01B

Before using this product, carefully read all product documentaon and retain it for future reference.

627.36.22.0

The following models belong to the Cadu Series UPS:

600 VA

800 VA

1000 VA

1500 VA

2000 VA

Cadu 650

Cadu 850

Cadu 1000

Cadu 1500

Cadu 2000

Thank you for purchasing our products!

Please read this manual before using the product.

nJoy is a brand of power and backup protecon products that create

soluons for mulple levels of environment complexity, residenal

to industrial

This UPS will protect your electronic equipment from physical

damage and will provide emergency baery backup power to

prevent data loss in the event of power problems.

UPS unit

Power cord

USB cable

User manual

Warranty card

Package contents

Product overview

Cadu 650/850 - Front view / Back view

English

Romana

431

2 76

NOTE!

Before installaon, please inspect the unit. Be sure that nothing inside the

package is damaged. Keep the original package in a safe place for future use.

Cadu 1000 - Front view / Back view

Cadu 1500/2000 - Front view / Back view

6 3

2 5

1. LCD display: Indicate status informaon, sengs and events. It

auto-dims to 20% brightness aer 20 seconds in normal condions.

It brightens up when power buon is shortly pressed or when

abnormal condion occurs ( Baery mode, Fault & Alarm).

2. Power On/O buon: Short press Power buon for LCD brighten,

long press Power buon to turn the UPS ON or OFF.

3. Input power cord: Connect to ulity power.

4. HID USB port: Allows the UPS to appear in Windows like a baery

icon. When the power is out, you can sll see the baery level and

adjust its sengs. Also Windows power management opons are

available. In case you need more advanced local management we

recommend you to install and use “ViewPower” soware.

5. 1Gb/s Network, Modem or Phone surge protecon

6. Input circuit breaker: This provides opmal overload protecon.

7. AC outlet: The UPS provides outlets for connected equipment to

insure temporary uninterrupted operaon during a power failure

and against surges and spikes.

Important safety warnings

Please comply with all warnings and operang instrucons in this manual

strictly. Save this manual properly and carefully read the following

instrucons before installing the unit. Do not operate this unit before

reading through all safety informaon and operang instrucons carefully:

Transportaon

• Please transport the UPS system only in the original package to

protect against shock and impact.

Preparaon

• Condensaon may occur if the UPS system is moved directly from cold

to warm environment. The UPS system must be absolutely dry before

being installed. Please allow at least two hours for the UPS system to

acclimate to the environment.

• Do not install the UPS system near water or in moist environments.

• Do not install the UPS system where it would be exposed to direct

English

Romana

sunlight or near heat sources.

• Do not block venlaon holes in the UPS housing.

Installaon

• Do not connect appliances or devices which would overload the UPS

system (e.g. laser printers) to the UPS output sockets.

• Place cables in such a way that no one can step on or trip over them.

• Do not connect domesc appliances such as hair dryers to UPS output

sockets.

• The UPS can be operated by any individuals with no previous

experience.

• Connect the UPS system only to an earthed shockproof outlet which

must be easily accessible and close to the UPS system.

• Please use only VDE-tested, CE-marked mains cable (e.g. the mains

cable of your computer) to connect the UPS system to the building

wiring outlet (shockproof outlet).

• Please use only VDE-tested, CE-marked power cables to connect the

loads to the UPS system.

• When installing the equipment, it should ensure that the sum of

the leakage current of the UPS and the connected devices does not

exceed 3.5mA.

Operaon

• Do not disconnect the mains cable on the UPS system or the building

wiring outlet (shockproof socket outlet) during operaons since this

would cancel the protecve earthing of the UPS system and of all

connected loads.

• The UPS system features its own, internal current source (baeries).

The UPS output sockets or output terminals block may be electrically

live even if the UPS system is not connected to the building wiring

outlet.

• In order to fully disconnect the UPS system, rst press the OFF/Enter

buon to disconnect the mains.

• Prevent uids or other foreign objects from entering the inside of the

UPS system.

• WARNING: This is a category C2 UPS product. In a residenal

environment, this product may cause radio interference, in which case

the user may be required to take addional measures.

Maintenance, service and faults

• The UPS system operates with hazardous voltages. Repairs may be

carried out only by qualied maintenance personnel.

• Cauon - risk of electric shock. Even aer the unit is disconnected

from the mains (building wiring outlet), components inside the UPS

system are sll connected to the baery and electrically live and

dangerous.

• Before carrying out any kind of service and/or maintenance,

disconnect the baeries and verify that no current is present and no

hazardous voltage exists in the terminals of high capability capacitor

such as BUS-capacitors.

• Only persons are adequately familiar with baeries and with the

required precauonary measures may replace baeries and supervise

operaons. Unauthorized persons must be kept well away from the

baeries.

• Cauon - risk of electric shock. The baery circuit is not isolated

from the input voltage. Hazardous voltages may occur between the

baery terminals and the ground. Before touching, please verify that

no voltage is present!

• Baeries may cause electric shock and have a high short-circuit

current. Please take the precauonary measures specied in this

manual and any other measures necessary when working with

baeries: remove wristwatches, rings and other metal objects, use

only tools with insulated grips and handles.

• When changing baeries, install the same number and same type of

baeries.

• Do not aempt to dispose of baeries by burning them. This could

cause baery explosion.

• Do not open or destroy baeries. Escaping electrolyte can cause injury

to the skin and eyes. It may be toxic.

• Please replace the fuse only with the same type and amperage in order

to avoid re hazards.

• Do not dismantle the UPS system.

English

Romana

Installing your UPS system

4.1 Hardware installaon guide

1. Placement & Storage condions

Install the UPS in a protected area that is free of excessive dust and

has adequate air ow. Please place the UPS away from other units at

least 15 cm to avoid interference. Do NOT operate the UPS where the

temperature and humidity is outside the specic limits. (Please check the

specs for the limitaons.)

2. Connect to ulity and charging

Plug in the AC input cord to the wall outlet. For the best results, suggest

to charge the baery at least 6 hours before inial use. The unit charges

its baery while connecng to the ulity.

3. Connect the loads

Plug in the loads to output receptacles on the rear panel of the UPS.

Simply turn on the power switch of UPS unit, then devices connected to

the UPS will be protected by UPS unit.

Do NOT plug LASER

PRINTERS into any of

the outlets.

Do NOT plug any SURGE

STRIPS into any of the

outlets.

CAUTION

4. Connect communicaon cable

To allow for unaended UPS shutdown/start up and status monitoring,

connect the communicaon cable one end to the USB port and the other

to the communicaon port of your PC. With the monitoring soware

installed, you can schedule UPS shutdown/start up and monitor UPS

status through PC.

5. Connect Modem/Phone /Network for surge protecon

Connect a single modem/phone line into surge protected “IN” outlet

on the back panel of the UPS unit. Connect from “OUT” out let to the

computer with phone line cable.

6. Turn On/O the unit

Turn on the UPS unit by pressing the power switch. Turn o the UPS unit

by pressing again the power switch.

4.2 Soware installaon guide

Install soware: For opmal computer system protecon, install the UPS

monitoring soware from hps://www.power-soware-download.com/

viewpower.html to fully manage the UPS.

LCD display indicators

UPS Mode LCD display Descripon

UPS Power

When UPS is powered

on, it will enter this

mode for few seconds.

Standby

Mode

In standby mode,

no output power is

available.

English

Romana

AC Mode

When AVR is funconing, icon

will ash every second.

When the input

voltage is within

acceptable range, UPS

will provide stable AC

power to output. The

UPS will also charge

the baeries in AC

mode.

Overload in

AC mode

Icons will ash.

When overload occurs,

alarm will beep every

0.5 second.

Baery

Mode

When baery level is low, icon

will ash every second .

Alarm will beep every

10 seconds.

Self-Test

Mode

This funcon is only

acvated via soware

for the model with

communicaon port.

Ce manuel convient aux modèles suivants

Table des matières

Langues :

Autres manuels Njoy UPS

Njoy

Njoy Ranger Series Manuel utilisateur

Njoy

Njoy Aten PRO Series Manuel utilisateur

Njoy

Njoy Balder Series Manuel utilisateur

Njoy

Njoy Astris 5K/3P2T2 Manuel utilisateur

Njoy

Njoy Balder Series Manuel utilisateur

Njoy

Njoy Echo Pro Series Manuel utilisateur

Njoy

Njoy Ranger 60KR Manuel utilisateur

Njoy

Njoy Cadu 650 Manuel utilisateur

Njoy

Njoy Keen Series Manuel utilisateur

Njoy

Njoy Argus Series Manuel utilisateur

Njoy

Njoy Garun Series Manuel utilisateur

Njoy

Njoy Aster Series Manuel utilisateur

Njoy

Njoy Helios PRO Series Manuel utilisateur

Njoy

Njoy Akin Series Manuel utilisateur

Njoy

Njoy Balder 1500 Manuel utilisateur

Njoy

Njoy Ranger 30KR Manuel utilisateur

Njoy

Njoy PWUP-LI060HR-AZ01B Manuel utilisateur

Njoy

Njoy Septu Series Manuel utilisateur

Njoy

Njoy Horus Plus Series Manuel utilisateur

Njoy

Njoy Aster Series Manuel utilisateur

Njoy

Njoy Shed 625 Manuel utilisateur

Njoy

Njoy Argus Series Manuel utilisateur

Njoy

Njoy Alvis Series Manuel utilisateur

Njoy

Njoy Horus Plus Series Manuel utilisateur

Manuels UPS populaires d'autres marques

Pylontech

Pylontech Victron & Pylontech US5000 Manuel utilisateur

Tecnoware

Tecnoware EVO DSP PLUS MM 6.8 Manuel utilisateur

Mecer

Mecer ME-1000-WTU Manuel utilisateur

Mustek

Mustek PowerMust 530(B) Plus Manuel d'installation et d'exploitation

Emerson

Emerson Liebert NXL series Manuel utilisateur

MAKELSAN

MAKELSAN BOXER SERIES Manuel utilisateur

Block

Block PC-0524-400-0 Manuel utilisateur

CyberPower

CyberPower CP585LCD Manuel utilisateur

Eaton

Eaton 3S Instructions de montage

CyberPower

CyberPower Office Tower Series UPS 1000 Manuel utilisateur

CyberPower

CyberPower BM100 Manuel utilisateur

Best Power

Best Power 610 Manuel utilisateur

Best Power

Best Power Unity/I UT3K Manuel utilisateur

Mustek

Mustek PowerMust 400 Offline Manuel utilisateur

Xantrex

Xantrex Trace 512 UR-UPS Manuel utilisateur

Forza

Forza SL-1501UL Manuel utilisateur

LEGRAND

LEGRAND keor 310081 Manuel utilisateur

ABB

ABB Conceptpower DPA 500 Manuel utilisateur