Nikon Super Coolscan 9000 ED Mode d'emploi
作成承認印 配布許可印
Copyrigh ｃ2004 by Nikon Corporation.
All Rights Reserved.
無断転載を禁ず
!!
Printed in Japan March 2004
VRA51701-R.3607.A
VRA51701
REPAIR MANUAL
Ｍ
サービス
計画課
VRA51701-R.3607.A
-LS-9000 -
CONTENTS
SPECIFICATIONS M1-M3
DISASSEMBLING
External cover D1
Main PCB, Power-PCB D2
Illumination unit, Base unit D3
Stage carriage unit D4
Stage carriage lead screw D5
AF carridge unit D6
AF carriage unit D7
Lead screw, AF motor, mirror uni D8
ASSEMBLY
Mirror / AF sensor A1
Assemble AF screw shaft A2
Assemble AF screw shaft A3
Assemble AF motorA4
AF carriage unit A5
Assemble AF carriage unit A6
AF carriage unit connections A7
Stage carriage A8
Stage carriage screw shaft unit A9
Assemble Screw shaft A10
Procedure for mounting SCAN motor unit A11
Stage carriage unit A12-A13
Holder motor unit A14
Illumination unit A15
Assemble Illumination unit A16
Base unit A17
Main PCB / Power unit A18
Front panel A19-A21
External view A22
Adjustments A23-A50
ELECTRICITY
Block diagram E1
Wiring E2
INSPECTION STANDARD & TOOL
Inspection Standard R1-R5
Tool List T1-T2
VRA51701-R.3607.A
- M1 ･ -
LS-9000
Media Negatives and positives, in color and monochrome
35-mm lm 1–2 strips of 1–6 frames. Up to 3 frames of 24 × 48 mm or 24 × 65 mm panorama
lm can be scanned with optional FH-869GR lm holder.
35-mm slides 1–5 slides with mounts 1.0–3.2 mm thick.
Medium-format lm 1–4 frames (6 × 4.5), 1–3 frames (6 × 6), or 1–2 frames (6 × 7, 6 × 8, or 6 × 9).
Medium-format slides Slides with mounts 1.0–3.2 mm thick can be scanned with optional FH-869M
lm holder.
Scanning system Fixed optical, movable media, parallel single-pass scanning system
Light source Red, Green, Blue, and Infrared (RGBIr) LEDs; slit light source with rod and dis-
perser
Image sensor 10,000 pixel three-line monochrome linear CCD image sensor
Color separation Performed by RGB LEDs
Optical resolution Up to 4000 pixels per inch
Analog-to-digital (A/D)
conversion
16 bits per color
Output Full color or greyscale at 8 or 16 bits per channel
Focus Auto and manual
Interface IEEE 1394
Power supply AC 100–240 V, 50/60 Hz
Operating environment +10–+35 °C (+50–+95 °F) at a humidity of 20–60%
Size and weight 249 × 498.5 × 202 mm/9.8˝ × 19.6˝ × 8.0˝ (W × H × D), 9 kg/19.8 lb (approx.)
16-mm lm 1–3 strips of 1–20 frames can be scanned with optional FH-816 lm holder.
Glass microscope slides 1–3 prepared glass microscope slides (26 × 76 mm, 0.8–1.5 mm thick) can be
scanned with optional FH-8G1 lm holder.
FH-
835S
FH-
835M
FH-869S, FH-869G
Aperture (mm)
Scan range (pixels) 4000
×
5904
5905
×
4032
8964
×
6696
25.4
×
37.5
37.5
×
25.6
56.9
×
42.5
Aperture/scan range
6 × 4.5
8964
×
8964
56.9
×
56.9
6 × 6
8964
×
11016
56.9
×
70.0
6 × 7
8964
×
12204
56.9
×
77.5
6 × 8
8964
×
13176
56.9
×
83.7
6 × 9
8964
×
13176
56.9
×
83.7
5.9×8.2
2362
×
3384
15.0
×
21.48
FH-
816
7248
×
3780
46.02
×
24.0
FH-
8G1
Power consumption 27 W or less; 14 W or less in standby mode
Specication
VRA51701-R.3607.A
- M2 ･ -
LS-9000
* Times for positive lm scanned at input resolution of 4000 dpi (2000 dpi when FH-869S is used with Digital DEE) and bit depth of 16 bits (CMS
on) using Nikon Scan 4 on Pentium 4 3.06 GHz FSB 533 MHz computer with 1 GB RAM, Windows XP Professional, IEEE 1394 interface, and
1024 × 768 display.
† Input resolution set to 2000 dpi
Scanning time
(Time to display image
when Preview button is
clicked, or when Scan
button is clicked follow-
ing preview. Times do
not include autofocus or
holder positioning.)*
With FH-835M 35-mm slide mount holder
With FH-869S 120/220 lm holder
Supplied Film Holders
FH-835S 35-MM STRIP FILM HOLDER
Size and weight 130 × 320 × 17 mm/5.1˝ × 12.6˝ × 0.7˝ (W × H × D), 200 g/7.1 oz. (approx.)
Film 1–2 strips of 35-mm lm, each with 1–6 frames
FH-835M 35-MM MOUNTED FILM HOLDER
Film 1–5 35-mm slides with mounts 1.0–3.2 mm thick and 49.0–50.8 mm wide
Size and weight 130 × 345 × 17 mm/5.1˝ × 13.6˝ × 0.7˝ (W × H × D), 180 g/6.3 oz. (approx.)
FH-869S 120/220 STRIP FILM HOLDER
Size and weight 130 × 320 × 17 mm/5.1˝ × 12.6˝ × 0.7˝ (W × H × D), 290 g/10.2 oz. (approx.)
6 × 4.5
6 × 6
6 × 7, 6 × 8, 6 × 9 1–2 frames
1–3 frames
1–4 frames
Film Medium-format (120/220) lm, 5.9 × 8.2 cm electron microscope lm
DEE Preview Scan
40 s
52 s
41 s
57 s
1 min 27 s
1 min 31 s
13 s
28 s
12 s
14 s
14 s
26 s
Off
Off
Off
Off
Off
On
GEM
Off
Off
Off
Off
Off
On
Scan Image
Enhancer ROC
Off
On
Off
Off
Off
Off
Off
On
Off
Off
Off
Off
ICE
Off
Off
On
Off
Off
Off
2 min 33 s
33 s
On
On
On
On On
DEE Preview Scan
3 min 05 s
8 min 55 s
3 min 14 s
7 min 05 s
2 min 20 s
11 min 40 s
38 s
1 min 26 s
38 s
40 s
38 s
1 min 26 s
Off
Off
Off
Off
Off
On†
GEM
Off
Off
Off
Off
Off
On
Scan Image
Enhancer ROC
Off
On
Off
Off
Off
Off
Off
On
Off
Off
Off
Off
ICE
Off
Off
On
Off
Off
Off
16 min 00 s
2 min 24 s
Off
On
On
On On
Supplied Film Holders
VRA51701-R.3607.A
- M3 ･ -
LS-9000
Optional Film Holders
FH-869M 120/220 MOUNTED FILM HOLDER
Size and weight 130 × 320 × 17 mm/5.1˝ × 12.6˝ × 0.7˝ (W × H × D), 170 g/6.0 oz. (approx.)
Film One 6 × 4.5 or 6 × 6 slide and one 6 × 7, 6 × 8, or 6 × 9 slide
FH-8G1 MEDICAL HOLDER
Size and weight 130 × 345 × 17 mm/5.1˝ × 13.6˝ × 0.7˝ (W × H × D), 190 g/6.7 oz. (approx.)
Slide
Slide cover
Total thickness No more than 2 mm, including adhesive
25 × 60 mm with thickness of 0.18 mm or less
26 × 76 mm, 0.8–1.5 mm thick
Media 1–3 prepared glass microscope slides
FH-869G 120/220 STRIP FILM HOLDER WITH GLASS
Size and weight 130 × 300 × 17 mm/5.1˝ × 11.8˝ × 0.7˝ (W × H × D), 300 g/10.6 oz. (approx.)
6 × 4.5
6 × 6
6 × 7, 6 × 8, 6 × 9 1–2 frames
1–3 frames
1–4 frames
Film Medium-format (120/220) lm, 5.9 × 8.2 cm electron microscope lm
FH-869GR ROTATING 120/220 STRIP FILM HOLDER WITH GLASS
Angle adjustment ±5 °
6 × 4.5
6 × 6
6 × 7, 6 × 8, 6 × 9 1–2 frames
1–3 frames
1–4 frames
Film Medium-format (120/220) lm, 5.9 × 8.2 cm electron microscope lm, 35-mm
panorama lm with frame size of 24 × 48 mm or 24 × 65 mm
Size and weight 130 × 320 × 17 mm/5.1˝ × 12.6˝ × 0.7˝ (W × H × D), 330 g/11.6 oz. (approx.)
FH-816 16-MM STRIP FILM HOLDER
Film 1–3 strips of 16-mm lm, each with 1–20 frames
Size and weight 130 × 375 × 17 mm/5.1˝ × 14.8˝ × 0.7˝ (W × H × D), 250 g/8.8 oz. (approx.)
Optional Film Holders
VRA51701-R.3607.A
- Ｄ1 ･ -
LS-9000
Disassembly
Notes: ① Be sure to remove the power wire before disassembly.
② When disassembling, make sure to memorize the processing state of wires and FPCs, screws to be xed
and their types, etc.
③ Because ICs are easily damaged by static electricity, be sure to get yourself earthed/grounded when
holding the main PCB and FPCs.
External cover
・Take out 8 screws at the back (#192) and 10 screws at the bottom (#192), then remove the side cover by sliding it.
(Removing 2 rubbers (#36) is unnecessary except when they are replaced.）
・Remove the rear panel (#32) by taking out 3 screws (#192) and 2 screws (#188). The connector shield-plate (#46)
comes off accordingly.
・Remove the connector on the main PCB A-part (which is connected from the front cover).
・Uncover the front cover by taking out 4 screws (#192).
#188
ICE
ABS
#31
#192 x8
#192 x4
#32
#36 x2
#192 x10
#46
#192 x3
x2
Front cover
Main PCB A-part
#192×8
#192×10
#36×2
#31
#188×2
#192×4
#46
#32
#192×3
VRA51701-R.3607.A
- Ｄ2 ･ -
LS-9000
B
#560
A
ABS
#50
#522
#197
#192 x4
A
B
#35
#541
#192 x6
#45
#43
#42
#516
#551 #192 x4
#517
#510
#509
・ Remove the main PCB (#541) by taking out 6 screws (#192).
・ Disconnect 6 connectors on the main PCB (#560, #551, #516, #509, #510, and #517), then remove the main PCB.
･ Remove the spring (#45) and unhook the A-part of the power SW (#42).
･ Remove the power-PCB (#522) and insulating sheet (#50) by taking out 1 screw (#197) and 4 screws (#192).
･ Remove the power base (#35) by taking out 4 screws (#192).
Main PCB, Power-PCB
VRA51701-R.3607.A
- Ｄ3 ･ -
LS-9000
#47
#197
x4
#192 x2
#192
x2
#192 x6
#34
#48
x4
Illumination unit, Base unit
・ Remove the relay-FPC from the connector of the illumination-PCB.
・ Remove the illumination unit from the base unit (#121) by taking out 4 screws (#192).
･ Remove the base unit from the bottom plate (#34) by taking out 4 screws (#197).
･ Remove the PCB support-plate (#47) by taking out 6 screws (#192).
Illumination PCB
Illumination unit
＃121
Relay-FPC
Connector
VRA51701-R.3607.A
- Ｄ4 ･ -
LS-9000
Stage carriage unit
・ Disconnect the connector of the holder motor by pulling it in the
direction indicated by the arrow.
・ Remove the holder motor unit by taking out 3 screws (#194).
・ Take out 4 screws (#194) and remove 4 retaining springs (#104).
･ Take out 2 screws (#191) then the stage carriage comes off with 2
guide shafts (#123) attached.
・ Pull out 2 guide shafts (#123).
#194×3
Connector
Stage carriage Holder motor unit
Screw shaft
#194×3
#191×3
#194×4
#104×4
#123×2
VRA51701-R.3607.A
- Ｄ5 ･ -
LS-9000
Stage carriage lead screw
・ Loosen 4 screws of the coupling (#137).
・ Take out 2 screws (#192) and remove the SCAN motor unit.
＊ Note:
Whenever the SCAN motor unit is detached, reassemble the motor unit by using the SCAN motor assembling tool.
・Take out 2 screws (#194) then remove 2 retaining springs (#104) and screw shaft.
＊ Note:
Remove the screw shaft with care because the bearing (#135), washer (#134) and spring (#136) jump out of the shaft.
・ Remove #151 by taking out the screw (#194).
#135
#136
#134
#137
Screw shaft SCAN motor unit
#194×2
#192×2
#104×2
#194
#151
4 screws (#137)
Autres manuels pour Super Coolscan 9000 ED
3
Table des matières
Autres manuels Nikon Scanner
Nikon
Nikon COOLSCAN LS-10 Manuel utilisateur
Nikon
Nikon LS-3510 Manuel utilisateur
Nikon
Nikon AF-S DX NIKKOR 35mm f/1.8G Manuel utilisateur
Nikon
Nikon LS4000 Manuel utilisateur
Nikon
Nikon 9238 - Super Coolscan 5000 ED Manuel utilisateur
Nikon
Nikon LS-4500AF Manuel utilisateur
Nikon
Nikon Transparency Unit Manuel utilisateur
Nikon
Nikon COOLSCAN LS-10 Instructions de montage
Nikon
Nikon Super Coolscan 5000 ED Manuel utilisateur
Nikon
Nikon Super Coolscan 9000 ED Manuel utilisateur
Nikon
Nikon COOLSCAN V ED Manuel utilisateur
Nikon
Nikon Scan 4 Manuel utilisateur
Nikon
Nikon Super Coolscan 900ED Manuel utilisateur
Nikon
Nikon LS-1000 Manuel utilisateur
Nikon
Nikon AX-210 Manuel utilisateur
Nikon
Nikon Super Coolscan 5000 ED Manuel utilisateur
Nikon
Nikon Super Coolscan 9000 ED Manuel utilisateur
Nikon
Nikon Scan Manuel utilisateur
Nikon
Nikon CoolScan IV ED Manuel utilisateur
Nikon
Nikon COOLSCAN LS-10E Manuel utilisateur
