National Instruments FBUS-HSE/H1 LD Manuel utilisateur

INSTALLATION GUIDE

FBUS-HSE/H1 LD

Fieldbus Network Module Linking Device

This document provides a quick guide to install and configure

the FBUS-HSE/H1 LD network module. For more detailed

information on using the network module, refer to the

FBUS-HSE/H1 Linking Device (LD) User Manual.

Features

• Foundation Fieldbus H1 interface to control network

• High Speed Ethernet interface

• Runs on 11 to 30 VDC power

• 0 to +55 °C operation

Kit Contents and Optional Equipment

Your kit contains the following items:

• FBUS-HSE/H1 LD network module

• Accessories—This installation guide and your software CD

You can order the following optional equipment from National

Instruments:

• Panel mount accessory, part number 777609-01

•Cables

• 24 VDC power supply

Installation

Complete the following steps to install the FBUS-HSE/H1 LD.

1. Use a flat-bladed screwdriver to open the DIN rail clip to the

unlocked position, as shown in Figure 1.

FBUS-HSE/H1 LD Installation Guide 2 ni.com

Figure 1. DIN Rail Clip

2. Mount the FBUS-HSE/H1 LD onto a 35 mm DIN rail or onto

a panel mount accessory.

Installing onto a DIN rail:

a. Hook the lip on the rear of the FBUS-HSE/H1 LD onto the

top of a 35 mm DIN rail and press the FBUS-HSE/H1 LD

down onto the DIN rail, as shown in Figure 2.

Figure 2. Mounting the FBUS-HSE/H1 LD onto a DIN Rail

1Cover

2Lip

3 35 mm DIN Rail

4 Press onto Rail

Rail Clip Locked Rail Clip Unlocked

b. Slide the FBUS-HSE/H1 LD to the desired position along

the DIN rail.

c. Lock the rail clip.

Installing onto a panel mount accessory, which you can order

separately from National Instruments:

a. Snap the panel mount accessory onto the module as shown

in Figure 3.

Figure 3. Mounting the FBUS-HSE/H1 LD onto a Panel Mount Accessory

b. Lock the rail clip.

c. Mount the FBUS-HSE/H1 LD and panel mount accessory

onto the desired surface. You can drill pilot holes using the

directions in the FieldPoint Network Module Panel Mount

Accessory Installation Guide.

Ethernet Network Connection

Connect the FBUS-HSE/H1 LD to a High Speed Ethernet network

using a standard Category 5 Ethernet cable to the RJ-45 connector

on the FBUS-HSE/H1 LD. The connection of Ethernet network is

shown in Figure 4.

FBUS-HSE/H1 LD Installation Guide 4 ni.com

Figure 4. Ethernet Network Connection

System Requirements

A DHCP server in the network is required for the

FBUS-HSE/H1 LD to obtain its IP address and start up.

Fieldbus Network Connection

Connect the FBUS-HSE/H1 LD to a Fieldbus H1 network using

the 9-position DSub connector on the FBUS-HSE/H1 LD. The

pinout of the DSub connector is shown in Figure 5.

1 FBUS-HSE/H1 LD

2 Ethernet Cable

3 Ethernet Devices

4 Ethernet Hub

5 H1 Network Ports

33 3

Figure 5. DSub Connector Pinout

Powering the FBUS-HSE/H1 LD

An 11–30 VDC power supply is required by each FBUS-HSE/H1

LD on your network.

The power connector is a 6-pin screw terminal connector whose

pinout is shown in Figure 6.

Figure 6. FBUS-HSE/H1 LD Power Connector Pinout

Connect the primary power supply to the center V and C pair. You

can connect an optional backup power supply to the left V and

Cpair.

12345

6789

Data +

Data –

NC = No Connection

vvv

ccc

11–30 VDC

backup power

supply

(optional)

–

11–30 VDC

primary power

supply

To adjacent device

(optional connection)

FBUS-HSE/H1 LD Installation Guide 6 ni.com

Mechanical Dimensions

Figure 7 shows the mechanical dimensions of the FBUS-HSE/H1

LD. Dimensions are given in millimeters [inches].

Figure 7. Mechanical Dimensions

Technical Support Resources

NI Web Support

National Instruments Web support is your first stop for help in

solving installation, configuration, and application problems and

questions. Online problem-solving and diagnostic resources

include frequently asked questions, knowledge bases,

product-specific troubleshooting wizards, manuals, drivers,

software updates, and more. Web support is available through the

Technical Support section of ni.com.

Worldwide Support

National Instruments has offices located around the world to help

address your support needs. You can access our branch office Web

sites from the Worldwide Offices section of ni.com. Branch office

Web sites provide up-to-date contact information, support phone

numbers, email addresses, and current events.

If you have searched the technical support resources on our Web

site and still cannot find the answers you need, contact your local

office or National Instruments corporate. For telephone support in

the United States, dial 512 795 8248. For telephone support

outside the United States, contact your local branch office:

Australia 1800 300 800, Austria 43 0 662 45 79 90 0,

Belgium32027570020,Brazil551132623599,

109.5

[4.31]

91.44

[3.60]

107.19

[4.22]

Canada (Calgary) 403 274 9391,

Canada (Montreal) 514 288 5722,

Canada (Ottawa) 613 233 5949, Canada (Québec) 514 694 8521,

Canada (Toronto) 905 785 0085,

Canada (Vancouver) 514 685 7530, China 86 21 6555 7838,

Czech Republic 420 2 2423 5774, Denmark 45 45 76 26 00,

Finland 385 0 9 725 725 11, France 33 0 1 48 14 24 24,

Germany 49 0 89 741 31 30, Greece 30 2 10 42 96 427,

India918051190000,Israel972036393737,

Italy3902413091,Japan81354722970,

Korea 82 02 3451 3400, Malaysia 603 9131 0918,

Mexico 001 800 010 0793, Netherlands 31 0 348 433 466,

NewZealand1800300800,Norway47066907660,

Poland 48 0 22 3390 150, Portugal 351 210 311 210,

Russia 7 095 238 7139, Singapore 65 6226 5886,

Slovenia 386 3 425 4200, South Africa 27 0 11 805 8197,

Spain34916400085,Sweden460858789500,

Switzerland 41 56 200 51 51, Taiwan 886 2 2528 7227,

Thailand 662 992 7519, United Kingdom 44 0 1635 523545

323150A-01 May03

*323150A-01*

FieldPoint™, National Instruments™, NI™, and ni.com™ are trademarks of National Instruments Corporation.

Product and company names mentioned herein are trademarks or trade names of their respective companies.

For patents covering National Instruments products, refer to the appropriate location: Help»Patents in your software,

the patents.txt file on your CD, or ni.com/patents.

Table des matières

Autres manuels National Instruments Unité de contrôle

National Instruments

National Instruments NI R Series Manuel utilisateur

National Instruments

National Instruments NI 9219 Manuel

National Instruments

National Instruments PXIe-8521 Manuel utilisateur

National Instruments

National Instruments CFP-TC-120 Manuel utilisateur

National Instruments

National Instruments R Series Manuel utilisateur

National Instruments

National Instruments SLSC-12101 Manuel utilisateur

National Instruments

National Instruments NI 9423 Manuel utilisateur

National Instruments

National Instruments SCC-FV01 Manuel utilisateur

National Instruments

National Instruments PXIe-8240 Manuel utilisateur

National Instruments

National Instruments SCC-A10 Manuel utilisateur

National Instruments

National Instruments PXIe-4302 Manuel

National Instruments

National Instruments FieldPoint FP-1000 Manuel utilisateur

National Instruments

National Instruments NI 9861 Manuel utilisateur

National Instruments

National Instruments VXI-8340 Series Manuel utilisateur

National Instruments

National Instruments NI 9871 Manuel utilisateur

National Instruments

National Instruments NI PXIe-4464 Manuel utilisateur

National Instruments

National Instruments NI 9214 Manuel utilisateur

National Instruments

National Instruments NI-9208 Manuel utilisateur

National Instruments

National Instruments PXIe-5698 Manuel utilisateur

National Instruments

National Instruments PXI-2568 Manuel utilisateur

National Instruments

National Instruments NI-9206 Manuel utilisateur

National Instruments

National Instruments 9755 Manuel utilisateur

National Instruments

National Instruments PXIe-8830mc Manuel utilisateur

National Instruments

National Instruments PXIe-4310 Manuel utilisateur

Manuels Unité de contrôle populaires d'autres marques

Festo

Festo Compact Performance CP-FB6-E Manuel de la liste des pièces

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur

JS Automation

JS Automation MPC3034A Manuel utilisateur

JAUDT

JAUDT SW GII 6406 Series Guide rapide

Spektrum

Spektrum Air Module System Manuel utilisateur

BOC Edwards

BOC Edwards Q Series Manuel utilisateur

KHADAS

KHADAS BT Magic Manuel utilisateur

Etherma

Etherma eNEXHO-IL Manuel utilisateur

PMFoundations

PMFoundations Attenuverter Manuel utilisateur

GEA

GEA VARIVENT Manuel utilisateur

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuel utilisateur

Altronix

Altronix LINQ8PD Instructions de montage

Eaton

Eaton Powerware Series Manuel utilisateur

WAGO

WAGO 750-407/040-000 Manuel utilisateur

Sony

Sony CCU-590 Manuel utilisateur

Graco

Graco 25D614 Manuel utilisateur

Task Force Tips

Task Force Tips YE-RF-900 Manuel de programmation

Shini

Shini SPV-U Series Manuel utilisateur