Munters WM54F Manuel d'instructions

Manual for use and maintenance

including assembling instructions

WM54F

Wall Mount Fan

with Damper Door

+CE Declaration of conformity

WM54 Fiberglass Wall Mount Fan

with Damper Door

Air extraction fan

Ag/MIT/UmGB-2483-07/17 Rev 1.0

Thank You:

Thank you for purchasing a Munters WM54F Fiberglass with Damper! Munters equipment is designed to be the

highest performing, highest quality equipment you can buy. With the proper installation and maintenance it will

provide many years of service.

Please Note:

To achieve maximum performance and insure long life from your Munters product it is essential that it be installed

and maintained properly. Please read all instructions carefully before beginning installation.

This manual for use and maintenance is an integral part of the apparatus together with the attached technical

documentation and has been produced with reference to Directive 2006/42/EC, paragraph A, Annex II, and

to ErP Directive 2009/125/CE Commission Regulation 327/2011.

This document is destined for the user of the apparatus: it may not be reproduced in whole or in part, committed

to computer memory as a file or delivered to third parties without the prior authorisation of the assembler of the

system. Munters Italy S.p.A. reserves the right to effect modifications to the apparatus in accordance with

technical and legal developments and to make alterations to specifications, quantities, etc.,for production or

other reasons, subsequent to publication.

Conditions and Limitations:

Products and Systems involved in a warranty claim under the “Warranty Claims and Return Policy” shall have

been properly installed, maintained and operated under competent supervision, according to the instructions

provided by Munters.

Malfunction or failure resulting from misuse, abuse, negligence, alteration, accident or lack of proper installation

or maintenance shall not be considered a defect under the Warranty.

WM54F Fiberglass Wall Mount Fan with Damper

Manual for use and Maintenance

Index

Chapters Page

2. Unpacking the Equipment

2.1 Parts List

2.2 Fan Dimensions

2.3 Tools for Installation

3. Installation Instructions 9

3.1 Install

3.2 Damper Door Installation

3.3 Cone Installation

3.4 Motor Mounting 26

4. Electrical Wiring 27

4.1 Recommended Wiring 28

7.1 Winterizing

7.2 Winter Weather Protection

5. Operation

6. Maintenance

7. Winterizing

8. Troubleshooting

9. Exploded View and part list

10. Warranty

1. CE Declaration

!! WARNING All the components and spare parts MUST be storaged in dry and clean environment.

CE Declaration of conformity

CE Declaration 1.

Munters Italy S.pA.

(complies with Subparagraph A Annex II Directive 2006/42/EC)

with registered officies in Strada Piani, 2 - 18027 Chiusavecchia (IM) - Italy

(Company Registration nr. 00081050080)

declares on its own responsability that the apparatus:

Designation

Model

Year of Manufacture

Fan designed for moving air to control temperature

and humidity in livestock.

WM54F

2017

conforms with the essential safety requirements stated by Apparatus Directive 2006/42/EC

and performance requirements comply with the ErP Directive 2009/125/CE,

with particular reference to the following provisions: UNI EN 953:2009, UNI EN ISO 12100:2010,

UNI EN ISO 12499:2009, UNI EN ISO 13857:2008, CEI EN 60204-1:2006 (CEI 44-5)

UNI EN ISO 5801:2009

Chiusavecchia, 5th July 2017

Marco Scomparin

Legal Representative

CE DeclarationChapter 1

1.1 Disclaimer

Munters reserves the right to make alternations to specifications, quantities, dimensions etc. for production or

other reasons, subsequent to publication. The information contained herein has been prepared by qualified

experts within Munters. While we believe the information is accurate and complete, we make no warranty or

representation for any particular purposes. The information is offered in good faith and with the understanding

that any use of the units or accessories in breach of the directions and warnings in this document is at the sole

discretion and risk of the user.

1.2 Introduction

In order to realize the full benefit from this product it is important that it is installed, commissioned and operated

correctly. Before installation or using the fan, this manual should be studied carefully. It is also recommended that it

is kept safely for future reference. The manual is intended as a reference for installation, commissioning and

day-to-day operation of the Munters fans.

1.3 Data for Fan Eco Design Directive

Fan description(*)

Product information requirements* →

(according to ANNEX I -3.2 of regulation)

1 2 3 4optional 6b 6c 78

Overall efficiency η%

Efficiency grade

Measurement category

Efficiency category

Target efficiency grade 2015

VSD must be installed with the fan

Motor power input at optimum

energy efficiency [W]

Flow rate at optimum energy

efficiency [m3/h]

Pressure at optimum energy

efficiency [Pa]

RPM at optimum energy efficiency

Speific ratio

WM54F 1.5hp 3ph 50Hz OS

56a

39,3 A static 44,9 34,4 no 1310 30562 60,71 510 1

WM54F 2hp 3ph 50Hz OS 39,8 A static 44,4 35,4 no 1852 34755 76,35 566 1

* Fans tested are configured according to COMMISSION REGULATION (EU) No 327/2011 of 30th March 2011 - ANNEX II - 1.5. Efficiency values, according to

Commission Regulation (EU) 327/2011, refers to exhaust fans only.

2.1 Parts List

Unpacking the Equipment2.

Each WM54F Fan Requires:

1 – 54” Fiberglass Orifice

1 – 54” Propeller

1 – Central Support

1 – Motor

1 – Motor Pulley

1 – Drip Shield

1 – Main Frame Assembly

1 – Plastic Door Assembly

4 – Plastic Cone Sections

1 – Round safety mesh

1 – Flat safety mesh

1 – Motor slide

1 – Tensioner Bracket

4 – Cone Support Brackets

4 – Cone/Strut Mounting Bracket

1 – V-Belt (A61)

1 – Hub with Bearings & Shaft

1 – Central pulley

1 – Tensioner Pulley

1 – Belt Tensioner

1 – Motor Stiffener Bracket

2 – Tension spring

1 – Cable

Bolts and nuts

[A]

[B]

[C]

[D]

[E]

[F]

[G]

[H]

[I]

[J]

[K]

[L]

[M]

[N]

[R]

[S]

Unpacking the EquipmentChapter 2

[AA]

[BB]

[CC]

[DD]

[EE]

Bolts and nuts for 1 – WM54F Fan Installation

[A]….12 – Ø8x32 Washer

[B]…. 2 – Ø6.3x19 Self-tapping Screw

[C]…. 4 – M8x25 Hex Screw

[D]…. 4 – Ø8 Ext Toothed Washer

[E]…. 4 – M8 Hex Nut

[F]…. 4 – M6x30 Hex Screw

[G]…. 4 – M6 Hex Nut with Flange

[I]….. 1 – M10x25 Hex Bolt

[J]…. 1 – Spring Washer D10

[K]….. 1 – M25 Hex Nut

[L]…. 1 – Waterproof Distance Piece

[M]…. 1 – Cup Cover Nut

[P]…..12 – Plastic Clip

[R]…. 3 – Cable Clamp

[S]…. 1 – M10x50 Hex Bolt

[AA]….18 – Ø8x30 Hex Screw

[BB]….. 4 – Ø8x45 Hex Screw

[CC]….. 7 – Ø8x65 Hex Screw

[DD]….37 – M8 Hex Nut with Flange

[EE]….. 4 – Ø4.8x13 Self-tapping Screw

[Q]…..1 – Cable

[Q]

[H]…. 4 – Ø8x24 Washer

[N]…. 1 – Spring Washer D8

[O]…. 1 – M8x20 Hex Screw

[O]

[P]

2.2 FAN DIMENSIONS

Fan Specifications: 50Hz shown

Voltage: 230/400 VAC

Phase: 3

Unpacking the Equipment

Chapter 2

Dimensions:

Size A B C D - Dia. E F Wall Openings

54” 1524 x 1524 1245 185 max 16841435 x 1435

Wall Opening (W.O.)

D - Dia.

Guard

2.3 TOOLS REQUIRED FOR INSTALLATION

Pneumatic screwdriver

17mm Spanner

8mm Long Spanner

10mm Long Spanner

13mm Long Spanner

36mm Spanner

Screw Head Adaptor

Small Hammer

10mm Combination Spanner

Screwdriver

17mm Combination Spanner

81 121

Installation Instructions 3.

3.1 INSTALL

Step 1

Construct framed opening to correct size according to the Wall Opening listed in chart A below. See Figure 1A

and 1B. When installing exterior sheet metal before fan, leave 50mm of the framing exposed on all sides so the

orifice can mount flush to the frame.

Minimum Spacing

'Z'

Chart A

Wall Opening

(W. x H.)

Fan Dia.

305 recommended; 90 minimum

54” 1435 x 1435

Figure 1B 100x100 Post Construction - Elevation View

Ceiling

Framing

(see chart A)

305

(see chart A)

See minimum

spacing notes in

Chart A Z

50 x 200 Header boards

100 x 100 or

100 x 150 Posts

50 x 100

Framing

50 x 200 Banner boards

Ceiling

100 x 100 or 100 x 150 Posts

(see chart A)

Note:

Damper doors should

be carefully set aside

out of direct sunlight

until needed.

Center To Center

Dimension

1524 Minimum

Figure 1A Frame Construction

W

Top View

W O.C

W x H Wall Opening

Sheet Metal Opening

Stud Wall

Step 2

Place the Central Support on saw horses or a flat work surface. The large center hole should be pointing

horizontally. Attach the Motor Slide and the Tensioner Bracket to the Central Support using (3) Long Bolts

[CC], (4) Washers [A] and (3) Nuts [DD]. The Motor Slide and the Tensioner Bracket share the middle

hole. See Figure 2A.

Figure 2A

Installation Instructions

Chapter 3

Step 2B

Attach the 3” Tensioner Pulley to the Belt Tensioner using Bolt [S]. Then attach the Belt Tensioner assembly

to the Tensioner Bracket using Bolt [I] and Washer [J]. Finger tighten only at this time. See Figure 2B.

Figure 2B

Central Support

Tensioner Bracket

Washer [A]

Motor Slide

Long Bolts [CC]

Tensioner Pulley

Belt Tensioner

Bolt [S]

Washer [J]

Bolt [I]

Nuts [DD]

Table des matières

Autres manuels Munters Ventilateur

Munters

Munters EM36 Manuel d'instructions

Munters

Munters Breeze Fan Manuel d'instructions

Munters

Munters TU600 Manuel d'instructions

Munters

Munters VX Series Manuel utilisateur

Munters

Munters WM36 K CB Series Manuel utilisateur

Munters

Munters EDC Series Manuel d'instructions

Munters

Munters AT14F Manuel utilisateur

Munters

Munters ATLAS 74 Manuel utilisateur

Munters

Munters WF50 Series Manuel utilisateur

Munters

Munters EDC24HE Manuel d'instructions

Munters

Munters GB Series Manuel utilisateur

Munters

Munters WM54K Manuel utilisateur

Munters

Munters EC52 Manuel d'instructions

Munters

Munters Saturn ONE Manuel utilisateur

Munters

Munters WF54 T CP Series Manuel utilisateur

Munters

Munters EM50 Manuel utilisateur

Munters

Munters EDC GHp Series Manuel d'instructions

Munters

Munters CX24 Manuel utilisateur

Munters

Munters VX55 Manuel utilisateur

Munters

Munters BI28M Manuel utilisateur

Munters

Munters WS55 Manuel utilisateur

Munters

Munters Vortex VX26F1CR Manuel utilisateur

Munters

Munters WF50 Series Manuel utilisateur

Munters

Munters EDHE Series Manuel d'instructions

Manuels Ventilateur populaires d'autres marques

ELTA FANS

ELTA FANS H03VV-F Manuel utilisateur

Hunter

Hunter 20714 Manuel d'instructions

Emerson

Emerson CARRERA VERANDA CF542ORB00 Manuel utilisateur

Hunter

Hunter Caraway Manuel d'instructions

Panasonic

Panasonic FV-15NLFS1 Manuel utilisateur

Kompernass

Kompernass KH 1150 Manuel utilisateur

VES

VES FALA100/12V/TR Manuel utilisateur

Vertiv

Vertiv Liebert DCD Manuel utilisateur

Westinghouse

Westinghouse GFP Series Manuel utilisateur

Venmar

Venmar KUBIX HRV PLUS Series Manuel utilisateur

Maico

Maico ECR 31 Manuel utilisateur

Sonnenkonig

Sonnenkonig Dinky Manuel utilisateur

S&P

S&P ECOWATT HXBR Manuel utilisateur

Wider

Wider IMP03369BH Manuel utilisateur

Panasonic

Panasonic F-60DHN Manuel utilisateur

Hinkley

Hinkley HIGHLAND Manuel utilisateur

Broan

Broan 766BN Manuel utilisateur

Premium

Premium PFS16022 Instructions de montage