Multitech MultiModem MT2834BLR Manuel utilisateur

MT2834BR/MT2834BLR

Intelligent Data/Fax

Rack Mounted Modem

User Guide

MT2834BR/MT2834BLR User Guide

PN: S000316

without prior written permission from Multi-Tech Systems, Inc.

Multi-Tech Systems, Inc. makes no representations or warranties with respect to the

contents hereof and specifically disclaims any implied warranties of merchantability

or fitness for any particular purpose. Furthermore, Multi-Tech Systems, Inc.

reserves the right to revise this publication and to make changes from time to time

in the content hereof without obligation of Multi-Tech Systems, Inc. to notify any

person or organization of such revisions or changes.

Revision Date Description

A 11/15/2003 Initial release of MT2834BR/MT2834BLR as a

combined User Guide.

Trademarks of Multi-Tech Systems, Inc. are as follows: MultiExpress,

MultiExpressFax, MultiModemII, Multi-Tech and the Multi-Tech logo.

Windows is a registered trademark of Microsoft Corporation.

Technical Support

France [email protected] +33 1-64 61 09 81

India [email protected] +91 124 6340778

U.K. [email protected] +44 118 959 7774

U.S., Canada [email protected] (800) 972-2439

Rest of World [email protected] +763 717-5863

World Headquarters

Multi-Tech Systems, Inc.

2205 Woodale Drive

Mounds View, Minnesota 55112 U.S.A.

(763) 785-3500 or (800) 328-9717

U.S. FAX (763) 785-9874

Technical Support (800) 972-2439

www.multitech.com

Contents

Chapter 1 - Introduction................................................................ 5

1.1 Introduction .............................................................................. 6

1.2 Features ................................................................................... 6

1.3 How to Use This Manual ......................................................... 7

Chapter 2 - Installation.................................................................. 8

2.1 Preliminaries ............................................................................ 9

2.1.1 Card Cage.................................................................... 9

2.1.2 Serial Cable ................................................................. 9

2.1.3 Telephone Line ............................................................ 9

2.2 Installation .............................................................................. 10

2.3 PC Board Controls ................................................................. 11

2.3.1 DIP-Switch Settings................................................... 12

2.4 OOS (Busy Out) Toggle Switch ............................................ 14

2.4.1 Out of Service/Test Jumper ...................................... 15

2.4.2 MI/MIC Option Jumper .............................................. 15

2.5 Dial-Up and Leased Lines ..................................................... 16

2.6 Modem LED Indicators .......................................................... 17

Chapter 3 - Installation................................................................ 19

3.1 Introduction ............................................................................ 20

3.2 Serial Port Limitations............................................................ 20

3.2.1 How Can You Identify Your UART Type? ................ 21

3.3 Configuring Your Software .................................................... 23

3.3.1 ConfiguringSoftware for Your Modem ...................... 23

3.4 PC Initialization Strings ......................................................... 24

3.4.1 Changing Default Parameters................................... 26

3.5 Macintosh Initialization .......................................................... 26

3.6 Configuring Software for Your Computer ............................. 27

3.6.1 Configuring Software for the Remote System.......... 28

3.6.2 Terminal Emulation .................................................. 28

3.6.3 File Transfer Protocols .............................................. 29

3.7 When to Disable Data Compression..................................... 29

3.7.1 Disabling Error Correction......................................... 30

Chapter 4 - ModemCommands................................................... 31

4.1 Modem AT Commands.......................................................... 32

4.1.1 Callback Security Commands ................................... 43

4.1.2 Remote Configuration ............................................... 45

4.1.3 Remote Configuration Procedures ........................... 45

4.1.4 V.25bis Commands ................................................... 46

4.2 S-Registers............................................................................. 48

4.3 Result Codes.......................................................................... 52

4.3.1 AT Commands and S-Register Summary ................ 55

Chapter 5 - Modem Testing ........................................................ 56

5.1 Local Analog Loopback Test/V.54 Loop 3............................ 57

5.2 Digital Loopback Test/V.54 Loop 2

(Local/Manual) ....................................................................... 58

5.3 Digital Loopback Test/V.54 Loop 2

(Remote/Automatic)............................................................... 60

5.4 Local Analog Loopback Test

(Synchronous Mode).............................................................. 61

5.5 Digital Loopback Test (Local/Manual)

(Synchronous Mode).............................................................. 62

5.6 Digital Loopback Test (Remote/Automatic)...............................

(Synchronous Mode).............................................................. 63

Chapter 6 - Warranty and Service.............................................. 64

6.1 Introduction ............................................................................ 65

6.2 Limited Warranty.................................................................... 65

6.3 Tech Support.......................................................................... 66

6.3.1 Recording Modem Information.................................. 66

6.3.2 Service ....................................................................... 66

6.4 Upgrading the MT2834BR..................................................... 67

6.4.1 Using FlashPro to Upgrade Modem Firmware......... 67

6.5 Safety Warnings..................................................................... 68

6.6 Internet ................................................................................... 69

Chapter 7 - BABT Requirements................................................ 70

7.1 Compliance with BABT Requirements.................................. 71

7.1.1 European Low Voltage Directive .............................. 72

7.1.2 Compliance with BS6305 Clause 6.2, BS6320

Clause 7.2, and BABT/SITS/82/005S/D................... 72

7.1.3 Compliance with BS6789: Section 3.1 and Part 2 ... 73

7.1.4 Compliance with BS6328 Part 1 ............................... 74

Appendices ................................................................................... 75

Appendix A ..................................................................................... 76

FCC Regulations for Telephone Line Interconnection........ 76

Canadian Limitations Notice ................................................. 78

Appendix B ..................................................................................... 79

Technical Specifications ........................................................ 79

Index .............................................................................................. 84

Chapter 1 - Introduction

1.1 Introduction

Welcome to the world of data communications. You have acquired one of

the finest intelligent data/fax modems available today, either the model

MT2834BR or MT2834BLR (MT2834), from Multi-Tech Systems. Your

MT2834 modem provides data communication at 33,600-14,400 bps

(*Enhanced V.34/V.32bis), as well as other prevalent datacomm standards.

The MT2834 also includes adaptive protocol enhancing used in typical

Unix® batch file transfers and support for IBM's AS/400 (iSeries)TM and

System3xTM environment. The MT2834BLR provides support for dial back-

up with automatic leased line restoral. This User Guide will help you install,

configure, test and use your MT2834 data/fax modem.

*Note enhancements on V.34 code (33.6K/31.2K) is awaiting formal ITU

approval; the ITU study group 14 has agreed on the technical side of the

proposal, with formal approval expected at the next ITU meeting in

Geneva.

1.2 Features

The MT2834 automatically adjusts to line conditions and the capabilities of

the modem it connects to, resulting in the highest possible speed, the most

accurate error correction, and the most efficient data compression possible

for each connection. The MT2834 is designed for data rates as high as

33,600 bps in full-duplex mode over public telephone lines.

MT2834 features include:

· Support of data rates of 33,600, 31,200, 28,800, 26,400, 24,000, 21,600,

19,200, 16,800, 14,400, 12,000, 9600, 7200, 4800, 2400, 1200, 0-300

bps.

· Automatic fallback to slower speeds in noisy line conditions, and fall-

forward to faster speeds as conditions improve.

· ITU-T V.42 LAP-M and MNP Classes 3 and 4 error correction.

· Data transfer rates up to 115,200 bps with V.42bis 4-to-1 data

compression.

· Automatic disabling of compression when transferring already-

compressed files.

· Serial port data rates adjustable to 115.2K bps.

· Autodial, redial, pulse (rotary) and touch-tone dial.

· Dial tone and busy signal detection for reliable call-progress detection.

· Compatibility with the standard AT command set used by most

communication programs.

· On-screen help menus.

· Nonvolatile memory for storage of customized modem parameters and

ten telephone numbers.

· Sends and receives faxes from your computer at 14,400, 9600, 7200 or

4800 bps.

· Responds to EIA TR.29 Class 2 fax commands.

· Supports UNIX-to-UNIX® UUCP Spoofing.

· Supports IBM's AS/400 (iSeries)TM and System3x environment.

1.3 How to Use This Manual

This chapter begins with a short introduction, a profile on modem features,

followed by a guide (which you are now reading) to the use of this manual.

This manual includes hardware installation and configuration described in

Chapter 2. Chapter 3 covers communication software configuration

recommended for the MT2834. Other issues covered include setting up

initialization strings, changing default parameters, configuring software for

the remote system and file transfer protocols. Chapter 4 covers modem AT

commands, Remote Configuration commands, S-Registers and Result

Codes. Chapter 5 illustrates the MT2834 diagnostic capabilities, providing

Analog and Digital Loopback testing procedures. Chapter 6 explains

product warranty and technical support. Appendices A and B respectively

describes FCC requirements and regulations and technical specifications.

Chapter 2 - Installation

2.1 Preliminaries

This chapter covers MT2834 installation and connection. In addition to the

contents of the MT2834 package, you will need the equipment listed

below.

2.1.1 Card Cage

The MT2834 is designed to mount in the Multi-Tech Systems' modem rack

(see Section 2.2 for various models available). This rack is an EIA-

standard 19-inch wide by 7-inch high rack, and mounts in any standard

computer cabinet. The rack has a sixteen modem slot capacity, one power

supply source (the CC1600 series card cage has a redundant power

supply capability), sixteen 25-pin (female) connectors for RS232C/V.24

interface and sixteen DB9 (female) connectors for phone line (the CC1600

series card cage has RJ11 back-plane connectors for phone line interface).

2.1.2 Serial Cable

You must provide a serial cable to connect each corresponding MT2834 to

your computer. The cable must have a DB-25 male interface into the

modem rack.

2.1.3 Telephone Line

The MT2834 uses one RJ11 jack per corresponding modem slot to

connect to the telephone lines. To connect the modem to the phone lines,

plug one end of the RJ11 cable that is provided with the modem into the

DB9 (9-pin connector) located on the back plane of the modem rack and

the other end into the phone-company-provided RJ11 or RJ11W modular

phone jack (CC916, CC1416 or CC2816 racks). To connect the modem to

the phone lines using the CC1600 modem rack, plug one end of the RJ11

cable provided with the modem into the rack's RJ11 connector (located on

the back plane of the modem rack) and the other end into the phone-

company-provided RJ11 or RJ11W modular phone jack.

Chapter 2 - Installation

2.2 Installation

Perform the following procedure to install modem cards in the CC916,

CC1416, CC2816 or CC1600 racks*. The installation process involves:

1. Power cord must be unplugged prior to installation of the Power

Source(s). Insert Power Source(s) (PS216A or PS1600) into far right of

the rack cage.

2. Slide a modem card into one of sixteen available modem slots. Start by

inserting a modem into the left-most channel (slot #1) of the rack. The

toggle switch should be at the bottom of the card, with the component

side of the card facing the right. The modem’s gold edge connector is

offset so that the modem cannot be inserted incorrectly. Continue

installing modem cards as necessary.

3. Plug RS232C Cable into appropriate modem slot (DB25/25-pin

connector-female) at rear of rack. Note: Any cables connected to the

computer must be shielded to reduce interference.

4. If you are connecting your phone line directly to the modem card, plug

the phone line cable into the appropriate modem slot (DB9/9-pin

connector-female) at the rear of the rack and the other end into the

phone-company-provided RJ11 or RJ11W modular phone jack. To

connect the modem to the phone lines using an CC1600 modem rack,

plug one end of the RJ11 cable provided with the modem into the rack's

RJ11 connector (located on the back plane of the modem rack) and the

other end into the phone-company-provided RJ11 or RJ11W modular

phone jack.

5. Plug in modem rack power cord.

6. Verify remote modem's current configuration settings with your

MT2834BR in terms of data compression, error correction, transmission

rate, etc. (ATL5/ATL7 Command - see Chapter 4 on AT commands).

7. Attach MT2834BR to dial-up phone lines and/or leased lines and verify

DIP-Switch #10 and #5 settings (Section 2.5).

8. Make sure modem and computer/terminal serial port baud rates are

adjusted (Section 2.5.).

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Multitech Modem

Multitech

Multitech MTCBA-C-U Manuel utilisateur

Multitech

Multitech SocketModem MTSMC-L Series Guide d'application

Multitech

Multitech MTCBA-E-U Manuel utilisateur

Multitech

Multitech MultiModem MT2834ZPW Manuel utilisateur

Multitech

Multitech MultiModem MT5600ZDX Manuel utilisateur

Multitech

Multitech Multimodem MTCBA-G-F2 Manuel utilisateur

Multitech

Multitech MultiConnect Adapter Manuel utilisateur

Multitech

Multitech etherFAX A2E Manuel utilisateur

Multitech

Multitech MT5600BA Manuel utilisateur

Multitech

Multitech MultiModem MT5600ZDX Manuel utilisateur

Multitech

Multitech IWAY MT128ISA-UV Manuel utilisateur

Multitech

Multitech Dragonfly Nano MTQN-MNG1-B02 Guide d'application

Multitech

Multitech MultiModem MT5634ZBA-V-V92 Manuel utilisateur

Multitech

Multitech MTCBA-E Manuel utilisateur

Multitech

Multitech MultiModem ZBA USB MT5634ZBA-USB Manuel utilisateur

Multitech

Multitech MultiMobile MT56128ZLX-NT Manuel utilisateur

Multitech

Multitech MultiModem ISDN MT128ISA-UV Manuel utilisateur

Multitech

Multitech MTCBA-E Manuel utilisateur

Multitech

Multitech MultiConnect Cell MTC-LVW2 Manuel utilisateur

Multitech

Multitech MultiModem Cell MTCBA-E1 Manuel utilisateur

Multitech

Multitech MultiModem iCell Manuel utilisateur

Multitech

Multitech MultiModem ISIHI-2S Manuel utilisateur

Multitech

Multitech MultiModem DID MT5634ZBA-DID Manuel utilisateur

Multitech

Multitech SocketModem Cell Cat M1 Guide d'application

Manuels Modem populaires d'autres marques

Davicom

Davicom DM562AP Manuel utilisateur

EpiValley

EpiValley TATA indicom SXC-1080 Manuel utilisateur

Zte

Zte WiMAX Manuel utilisateur

Intelimax

Intelimax MA-2060 Manuel utilisateur

SMC Networks

SMC Networks D3CM1604V Manuel d'utilisation et d'entretien

Telstra

Telstra Wi-Fi 4G Advanced Pro X Manuel utilisateur

Thrane&Thrane

Thrane&Thrane imarsat EXPLORER 300 Manuel utilisateur

Samsung

Samsung AceLink SAM-335A Manuel utilisateur

Enfora

Enfora Enabler-G Guide de configuration rapide

iRZ

iRZ ATM2-232 Manuel utilisateur

Zhone

Zhone 6310 Manuel utilisateur

Paradyne

Paradyne Hotwire 7976 Manuel utilisateur

US Robotics

US Robotics 3453C Manuel utilisateur

MaxTech

MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Manuel utilisateur

Zte

Zte MF823 Manuel utilisateur

Four-Faith

Four-Faith F1403 Manuel utilisateur

Sierra Wireless

Sierra Wireless AIRLINK MP595W Manuel utilisateur

Gemtek

Gemtek WiMAX WIXFBR-103 Manuel utilisateur