Multitech MultiConnect Cell 100 series Manuel utilisateur

MultiConnect®Cell 100 Series Cellular Modem

Cat M1

MTC-MNK1 Quick Start

MultiConnect®Cell 100 Series Cellular Modem Cat M1 MultiTech Systems MultiConnect®Cell 100 Series Cellular Modem Cat M1 MultiTech Systems

Quick Start Quick Start

Installing the Cellular Modem

1. Connect the antenna to the antenna connector (CELL).

Finger-tighten.

2. For serial models, connect to the device interface:

a. Connect the DE-9 connector (9-pin) of an RS-232

cable to the RS-232 connector on the cellular modem.

b. Connect the other end to the serial port on your

computer or other device.

c. Attach the power blades to the power supply.

d. Attach the power supply to the power connector on the

cellular modem. Finger-tighten.

e. Plug the power supply into your power source.

3. For USB models, connect to the device interface:

a. Connect the mini-USB connector end of the cable to

the device's USB connector.

b. Connect the USB cable's other end to your computer,

either directly or through a hub.

After power is applied:

■The POWER LED lights after the device powers up.

■When the LS LED begins to blink, the device is registered.

Mounting Device

1. Locate the groove on the bottom of the cellular modem.

2. Slide the mounting rod through the groove.

3. To secure the rod to the desired surface, place and tighten

two screws in the holes on either end of the mounting rod.

Refer to the user guide for an illustration of the mounting

rod, as well as the dimensions for placement of the screws.

MultiConnect®Cell 100 Series Cellular Modem Cat M1

Document Part Number: 82130650L

This publication may not be reproduced, in whole or in part, without the

specific and express prior written permission signed by an executive

by Multi-Tech Systems, Inc.

Multi-Tech Systems, Inc. makes no representations or warranties,

whether express, implied or by estoppels, with respect to the content,

information, material and recommendations herein and specifically

disclaims any implied warranties of merchantability, fitness for any

particular purpose and non-infringement. Multi-Tech Systems, Inc.

reserves the right to revise this publication without obligation to notify any

person or organization of such revisions or changes.

MultiConnect, MultiTech and the MultiTech logo are registered

trademarks of Multi-Tech Systems, Inc. All other brand and product

names are trademarks or registered trademarks of their respective

companies.

MultiConnect®Cell 100 Series Cellular Modem Cat M1 MultiTech Systems MultiConnect®Cell 100 Series Cellular Modem Cat M1 MultiTech Systems MultiConnect®Cell 100 Series Cellular Modem Cat M1 MultiTech Systems

Quick Start Quick Start Quick Start

Overview

The MultiConnect Cell 100 Series Cellular Modem for Cat M1 (MTC-

MNK1) provides secure data communication between many types of

devices that use legacy and the latest communication technologies.

Note: Check for an updated version of this document at

http://www.multitech.com/brands/multiconnect-cell-100-series

Package Contents

Your package typically includes the following (varies with model):

Power

Supply

1 - 9 VDC power supply and 1 - blade/plug (serial

models )

Cables 1 - Power cable from power supply (serial models) or

USB cable (USB models)

Documents 1 - Quick Start Guide, 1 - Warranty Plans, 1 -

Activation, Support & Regulatory Information

Other Items 1 - Mounting rod, 4 - Clear adhesive bumpons

Device 1- MultiConnect Cell 100 Series Cellular Modem

Note: You will need an cellular antenna, which is sold separately.

Additional Information

For more information on your device, refer to the appropriate user guide:

http://www.multitech.com/brands/multiconnect-cell-100-series

Regulatory Information

It is verified that foregoing equipment has been registered under the

Clause 3, Article 58-2 of Radio Waves Act.

Dimensions

The MTC is 4.169 inches x 3.00 inches x 1.163 inches

LED Descriptions

The top panel contains the following LEDs:

■Power and Terminal Ready LEDs - The Power LED indicates

that DC power is present. The TR LED (serial model only)

when lit indicates that unit is ready to receive data.

■Modem LEDs - Two modem LEDs indicate carrier detection

(CD LED for serial models only) and link status (LS LED).

■Programmable Signal LEDs - Three signal LEDs can be

programmed to display the signal strength level of the wireless

connection.

Side Panel Connectors

The device has connectors on both sides with the right side (top image)

the same for all models.

The right side includes:

■CELL cellular female SMA connector

■SIM card slot

■Power-saving switch (serial models only)

The left side includes:

■5-32 VDC power connector

■RS-232 (DE 9-pin, female-D) connector (serial models only)

■USB connector (USB models only)

Installing a SIM Card

To operate the modem on a particular cellular network, you need a mini

(2FF) SIM card from your network provider.

To install the SIM card:

1. Locate the SIM card slot on the side of the modem.

2. With the contacts down and notch on the left, push the SIM

card into the slot until it snaps into place.

Autres manuels pour MultiConnect Cell 100 series

Ce manuel convient aux modèles suivants

Autres manuels Multitech Modem

Multitech

Multitech MT9234ZBA-USB-CDC-XR Manuel utilisateur

Multitech

Multitech MMCModem GPRS (MTMMC-G) Manuel utilisateur

Multitech

Multitech MultiModem iCell Manuel utilisateur

Multitech

Multitech MT1932ZDX Manuel utilisateur

Multitech

Multitech MultMobile MT9234MU Manuel utilisateur

Multitech

Multitech MMH956K Manuel technique

Multitech

Multitech MultiConnect microCell MTCM-LNA3 Manuel utilisateur

Multitech

Multitech MTCBA-G-EN-F1 Manuel utilisateur

Multitech

Multitech MultiConnect Cell MTC-H5 Manuel utilisateur

Multitech

Multitech MultiConnect MicroCell MTCM-LAT3 Manuel utilisateur

Multitech

Multitech MultiConnect microCell MTCM2-L4G1 Manuel utilisateur

Multitech

Multitech MultiModem MT5600ZDXV Manuel utilisateur

Multitech

Multitech MultiConnect Cell 100 series Manuel utilisateur

Multitech

Multitech MultiModem iCell MTCMR-E1 Manuel utilisateur

Multitech

Multitech MultiModem GPRS with Ethernet Interface Manuel utilisateur

Multitech

Multitech MultiModem MTCBA-G-U-F4 Manuel utilisateur

Multitech

Multitech MTCMR-H Manuel utilisateur

Multitech

Multitech MTC-EV3 Manuel utilisateur

Multitech

Multitech 5634 Series Manuel utilisateur

Multitech

Multitech MultiModemUSB MT5634ZBA-USB Manuel utilisateur

Multitech

Multitech MTCBA-G-EN-F4-NAM Manuel utilisateur

Multitech

Multitech RJModem MT5656RJ Mode d’emploi

Multitech

Multitech MultiModem MT5634ZPX Manuel utilisateur

Multitech

Multitech MT5656ZDX Series Manuel utilisateur

Manuels Modem populaires d'autres marques

Davicom

Davicom DM562AP Manuel utilisateur

EpiValley

EpiValley TATA indicom SXC-1080 Manuel utilisateur

Zte

Zte WiMAX Manuel utilisateur

Intelimax

Intelimax MA-2060 Manuel utilisateur

SMC Networks

SMC Networks D3CM1604V Manuel d'utilisation et d'entretien

Telstra

Telstra Wi-Fi 4G Advanced Pro X Manuel utilisateur

Thrane&Thrane

Thrane&Thrane imarsat EXPLORER 300 Manuel utilisateur

Samsung

Samsung AceLink SAM-335A Manuel utilisateur

Enfora

Enfora Enabler-G Guide de configuration rapide

iRZ

iRZ ATM2-232 Manuel utilisateur

Zhone

Zhone 6310 Manuel utilisateur

Paradyne

Paradyne Hotwire 7976 Manuel utilisateur

US Robotics

US Robotics 3453C Manuel utilisateur

MaxTech

MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Manuel utilisateur

Zte

Zte MF823 Manuel utilisateur

Four-Faith

Four-Faith F1403 Manuel utilisateur

Sierra Wireless

Sierra Wireless AIRLINK MP595W Manuel utilisateur

Gemtek

Gemtek WiMAX WIXFBR-103 Manuel utilisateur