Multitech MTD100U Manuel utilisateur

MTD100U Quick Start: Page 1

MTD100U

External ADSL USB Modem

Quick Start Guide PN 82099101

Product Description

The MTD100U is an ADSL USB modem that supports up to 8 Mbs connections. Using existing phone

lines and ADSL service, the MTD100U offers users up to 160 times faster connectivity than traditional

access technologies. This modem is ideal for business or home users who require broadband for intensive

applications like video conferencing, MP3, multimedia and high speed Internet or remote access.

Drivers

Three types of device drivers are provided for the MultiTech MTD100U modem: WAN, LAN, and ATM.

Note that all three drivers support ATM protocol. In addition, the ATM driver works with ATM services

that are available in recent Windows operating systems. The proper choice of driver depends on the

combination of Windows operating system and protocol.

1. WAN driver – this driver causes the modem to resemble a dial-up modem. Call establishment is

performed through Dial-Up Networking. This driver supports RFC 2364 with PVC connections. It

can be used with Windows 98, Windows 98SE, Windows 2000, and Windows Me.

2. LAN (RFC 1483) driver −this driver makes the modem appear as a LAN or Ethernet device.

Connection establishment is automatic. This driver supports RFC 1483 with PVC connections. It

can be used with Windows 98, Windows 98SE, Windows 2000, and Windows Me.

3. ATM driver – this driver works in conjunction with ATM services provided by Windows. Both

RFC 1577 and RFC 2364 are supported. The ATM driver uses Dial-Up Networking to create a

PVC or SVC connection to establish a PPP (RFC 2364) connection. This driver can be used with

Windows 98 SE, Windows 2000, and Windows Me.

Operating System Support

Windows 98, Windows 98 Second Edition, Windows 2000, Windows Me

Installation Pre-Requisites

In order to install the software, you must know certain technical parameters, settings, and characteristics

that are specific to your particular service provider (see list below). Check with your DSL service provider

if necessary.

• type of driver to be installed • ATM Virtual Circuit ID (VCI) -

required if not using default driver type

• IP address settings • encapsulation type - required if not

using default driver type

• name server information • modulation type - required if not using

default driver type

• ATM Virtual Path ID (VPI) - required if

not using default driver type

• User Name (for PPP applications only)

• Password (for PPP applications only).

MTD100U Quick Start: Page 2

Software Installation

Each type of installation (LAN, WAN, and ATM) involves its own installation sequence guided by Multi-

Tech’s installation wizard. See User Guide for details. A condensed installation procedure is given below.

Before starting the software setup process, close all Windows programs previously running on your PC.

1. Insert the installation CD into the CD drive. The installation wizard will be launched

automatically. Click on the Drivers icon. The user can also launch the installation wizard by

double clicking on the file “Setup.exe” in the root directory of the installation CD.

2. The "Welcome" window provides an opportunity to quit the setup process to exit all Windows

programs before continuing. If the Windows programs were previously closed, click Next.

3. The "Select ISP" window allows you to specify your DSL service provider. A list of service

providers is displayed. Default values for the Type of Driver, ATM Virtual Path ID (VPI), ATM

Virtual Circuit ID (VCI), Encapsulation type and Modulation type are provided for each DSL

service provider listed in the window.

If your DSL service provider is listed and you would like to accept the default values, highlight

the provider’s name, click Next, and continue with Step 5 below.

If your DSL service provider is listed and you would like to change the default values, highlight

the provider’s name and click Customize. Continue with Step 4a below.

If your DSL service provider is not listed, select Other Service Provider and click Next.

Continue with Step 4a below.

4a) Select the type of driver to be installed from the "Select Driver Type" window and click Next.

4b) Enter the VPI, VCI, Encapsulation type and Modulation type from the "Communication

Settings" window and click Next.

Note: The setting above will vary depending on the application. If you do not know the correct

settings for your application, then check with your ISP.

5. The "Start Copying Files" window will be displayed. You may review the current settings and

click Customize or Back to change the settings. Click Next to accept the current settings; a

message will be displayed indicating that files are being copied.

6. The "Setup Complete" window indicates successful completion of the installation process.

Select Yes, I want to restart my computer now, remove any disks from their drives, and click

Finish. Your PC will reboot. Continue with the Hardware Installation section.

Hardware Installation

Note: For Windows 98 SE applications, you may need the Windows 98 SE CD ROM to complete the

installation. Once the PC has rebooted, install the MTD100U modem.

1. Insert the rectangular end of a USB cable into the USB port of your PC.

2. Insert the square end of the USB cable into the USB port of the MTD100U.

Note: The MTD100U will be detected and messages will be displayed

as the modem software is installed.

3. For Windows 2000 applications, the "Digital Signature Not Found" window may appear

warning that the installation software is not a digitally signed version. A digital signature is not

necessary; Multi-Tech has tested the software with Windows 2000. Click Yes to allow the

installation to continue. (Multi-Tech will be releasing a digitally signed version of the driver in

the near future.)

4. For Windows 2000 applications, the "Found New Hardware Wizard" window indicates the

modem has been installed and suggests you reboot the system to have new settings take effect.

Click Finish.

5. A message is displayed confirming reboot of the system; click Yes. Once the PC has rebooted,

installation of the MTD100U is complete. Continue with the Customizing Communication

Settings section in the MTD100U User Guide.

Autres manuels pour MTD100U

Table des matières

Autres manuels Multitech Modem

Multitech

Multitech MultiModem MT5656ZDX-V Manuel utilisateur

Multitech

Multitech MultiModem ZBA USB MT5634ZBA-USB Manuel utilisateur

Multitech

Multitech V.92 Desktop Modems MultiModem ZDX Manuel utilisateur

Multitech

Multitech MultiModem MT5600DSDV2 Manuel utilisateur

Multitech

Multitech MultiMobile MT9234MU Manuel utilisateur

Multitech

Multitech MultiModem ZPX Manuel utilisateur

Multitech

Multitech MultiConnect MTPCIE-H5 Mode d’emploi

Multitech

Multitech MTCBA-C-EN-N1 Manuel utilisateur

Multitech

Multitech MultiModem MT5634ZBA-V.92 Manuel utilisateur

Multitech

Multitech MT9234ZBA-USB Manuel utilisateur

Multitech

Multitech GFU19 Manuel utilisateur

Multitech

Multitech MT2834MR Manuel utilisateur

Multitech

Multitech MultiModem MTCBA-G-U-F4 Manuel utilisateur

Multitech

Multitech MultiConnect MTCM Manuel utilisateur

Multitech

Multitech CC1600 Series Manuel utilisateur

Multitech

Multitech IWAY MT128ISA-UV Manuel utilisateur

Multitech

Multitech MT1932ZDX Manuel utilisateur

Multitech

Multitech MultiConnect microCell MTCM-LNA3 Manuel utilisateur

Multitech

Multitech MultiMobile V.34/33.6K Manuel utilisateur

Multitech

Multitech MultiConnect Cell 100 series Manuel utilisateur

Multitech

Multitech MTC-EV3 Manuel utilisateur

Multitech

Multitech MultiModem ZBA MT9234ZBA Manuel utilisateur

Multitech

Multitech BL-Series Manuel utilisateur

Multitech

Multitech MultiModem ISI ISI3334/4 Manuel utilisateur

Manuels Modem populaires d'autres marques

Davicom

Davicom DM562AP Manuel utilisateur

EpiValley

EpiValley TATA indicom SXC-1080 Manuel utilisateur

Zte

Zte WiMAX Manuel utilisateur

Intelimax

Intelimax MA-2060 Manuel utilisateur

SMC Networks

SMC Networks D3CM1604V Manuel d'utilisation et d'entretien

Telstra

Telstra Wi-Fi 4G Advanced Pro X Manuel utilisateur

Thrane&Thrane

Thrane&Thrane imarsat EXPLORER 300 Manuel utilisateur

Samsung

Samsung AceLink SAM-335A Manuel utilisateur

Enfora

Enfora Enabler-G Guide de configuration rapide

iRZ

iRZ ATM2-232 Manuel utilisateur

Zhone

Zhone 6310 Manuel utilisateur

Paradyne

Paradyne Hotwire 7976 Manuel utilisateur

US Robotics

US Robotics 3453C Manuel utilisateur

MaxTech

MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Manuel utilisateur

Zte

Zte MF823 Manuel utilisateur

Four-Faith

Four-Faith F1403 Manuel utilisateur

Sierra Wireless

Sierra Wireless AIRLINK MP595W Manuel utilisateur

Gemtek

Gemtek WiMAX WIXFBR-103 Manuel utilisateur