Multitech ProxyServer MTPSR2-201 Manuel utilisateur
Internet Access for
LAN-Based Users
Model MTPSR2-201
Quick Start Guide
Quick Start Guide
82078800 Revision A
DSU ProxyServer (Model No MTPSR2-201)
This publication may not be reproduced, in whole or in part,
without prior expressed written permission from Multi-Tech
Systems, Inc. All rights reserved.
Copyright © 1998, by Multi-Tech Systems, Inc.
Multi-Tech Systems, Inc. makes no representations or warranties
with respect to the contents hereof and specifically disclaims any
implied warranties of merchantability or fitness for any particular
purpose. Furthermore, Multi-Tech Systems, Inc. reserves the right
to revise this publication and to make changes from time to time in
the content hereof without obligation of Multi-Tech Systems, Inc. to
notify any person or organization of such revisions or changes.
Record of Revisions
Revision Description
AManual released. All pages at revisionA.
(8/1/98) Patents
This Product is covered by one or more of the following U.S.
Patent Numbers:
5.301.274; 5.309.562
;
5.355.365; 5.355.653;
5.452.289; 5.453.986
. Other Patents Pending.
TRADEMARK
Trademark of Multi-Tech Systems, Inc. is the Multi-Tech logo.
Windows is a registered trademark of Microsoft.
Multi-Tech Systems, Inc.
2205 Woodale Drive
Mounds View, Minnesota 55112
(612) 785-3500 or (800) 328-9717
Fax 612-785-9874
Tech Support (800) 972-2439
InternetAddress: http://www.multitech.com
Fax-Back (612) 717-5888
iii
Contents
Introduction ................................................................................... 4
Related Documentation................................................................. 5
Safety Warnings ............................................................................ 6
Unpacking your ProxyServer ........................................................ 6
V.35 Shunt Procedure ................................................................... 7
Cabling your ProxyServer ............................................................. 9
Cabling Procedure ...................................................................... 10
Loading your Software .................................................................11
Limited Warranty ......................................................................... 16
Service.................................................................................. 17
DSU ProxyServer Quick Start Guide
4
Introduction
Welcome to Multi-Tech's new DSU ProxyServer, model
number MTPSR2-201, a single, secure gateway that provides
multiple LAN users with high performance Internet access
over a leased line. The DSU ProxyServer functions as a TCP/
IP proxy server that resides on the outer edge of your firewall
and provides up to 56K of bandwidth to LAN users. The DSU
ProxyServer features a 10BaseT port for local LAN
connection, a command port for configuration, a 56K bps DDS
4-wire WAN connection, and a RS232 port for auto-dial
backup in case the leased line connection is lost. System
management is provided through the command port using
bundled Windows® software which provides easy-to-use
configuration menus.
The MTPSR2-201 also supports dial-in Remote Access Server
(RAS) when the WAN 2 port is configured to support it. Refer
to the Software Installation section of this guide, and to your
ProxyServer User Guide for more details on RAS.
RD TD CL LK RD TD CD NS DS RD TD CD
V35
Figure 1. DSU ProxyServer
Introduction
5
Related Documentation
The DSU ProxyServer Quick Start Guide is intended to be
used by qualified systems administrators and network
managers. This quick start provides the necessary information
for a qualified person to unpack, cable, load software, and
configure the unit for proper opearation.
A detailed DSU ProxyServer User Guide is also provided with
your unit. This user guide provides in-depth information on the
features and functionality of Multi-Tech’s ProxyServer. The
User Guide is provided in diskette form and is also available
from our web site.
The diskette media is produced usingAdobeAcrobat for
viewing and printing the user guide. To view or print your copy
of a user guide, loadAdobeAcrobat Reader on your system.
AdobeAcrobat Reader can be downloaded fromAdobe’s web
Site at:
http://www.adobe.com/prodindex/acrobat/roadstep.html
Launch the Reader and select the .pdf file from the diskette.
Viewing and printing a user guide from the web also requires
that you have theAdobeAcrobat Reader loaded on your
system. The DSU ProxyServer User Guide is also available on
Multi-Tech’s WEB site at:
http://www.multitech.com
From the MTS homepage, click Support | Manuals |
ProxyServer and choose DSU ProxyServer to download the
.pdf file.
DSU ProxyServer Quick Start Guide
6
Safety Warnings
1. Never install telephone wiring during a lightning storm.
2. Never install telephone jacks in wet locations unless
the jack is specifically designed for wet locations.
3. Never touch uninsulated telephone wires or terminals
unless the telephone line has been disconnected at the
network interface.
4. Use caution when installing or modifying telephone lines.
5. Avoid using a telephone (other than a cordless type)
during an electrical storm. There may be a remote risk of
electrical shock from lightning.
6. Do not use the telephone to report a gas leak in the vicinity
of the leak.
Unpacking your ProxyServer
Remove all items from the box.
Quick Start Guide
RD TD CL LK RD TD CD NS DS RD TD CD
V35
Figure 2. Unpacking
V.35 Shunt Procedure
7
V.35 Shunt Procedure
If you are using an external DCE device on the WAN 2 RS232/
V.35 port, and the connection will be a V.35 connection, the the
interal shunt must be moved from the RS232C (default)
position prior to cabling and power-up. The following steps
detail the procedures for switching the shunt.
Step Procedure
1 Ensure that the external power supply is disconnected
from the ProxyServer.
2 Turn the ProxyServer over and remove the cabinet
mounting screw from the chassis.
Front Panel Back Panel
Cabinet Mounting Screw
Figure 2-2. Cabinet Mounting Screw
3 Being sure to support the back panel, turn the
ProxyServer right-side-up, tilt the back panel down, and
slide the circuit board out of the chassis.
DSU ProxyServer Quick Start Guide
8
4 Place the unit on a flat, grounded surface, with the LED’s
facing you.
5 Pry the shunt out of the RS232 position, and insert it in the
V.35 position.
5678
V.35 Shunt Position
RS232C Shunt Position
Back Panel Connectors
8-Position DIP Switch
RAM Sockets
LEDs
Figure 2-3. Shunt Positions
6 Align the board with the guide slots on the inside of the
chassis and carefully slide the board back into the chassis.
7 Being sure to support the back panel, turn the
ProxyServer over again, and replace the cabinet mounting
screw.
8 Turn the ProxyServer right-side-up again and proceed to
the nect section to connect the cables.
Cabling
9
Cabling your ProxyServer
Cabling your ProxyServer involves making the proper Power,
Command Port, and DSU connections, and optionally, the
RS232/V.35 connection. Figure 3 shows the back panel
connectors and the associated cable connections. The table
that follows details the procedures for connecting the cables to
your ProxyServer.
Power Connection
PC Connection
10BASET COMMAND56K DSU POWER
ON
OFF
RS232/V.35
Ethernet Connection
DDS WAN Connection
DCE Connection
Figure 3. Cable Connections
DSU ProxyServer Quick Start Guide
10
Cabling Procedure
Step Procedure
1. Connect one end of the power supply to a liveAC outlet
and connect the other end to the ProxyServer as shown in
Figure 3. The power connector is a 6-pin circular DIN
connector.
2. Connect the ProxyServer to a PC by using the short RJ45
to DB25 (female) cable provided with your unit. Plug the
RJ45 end of the cable into the Command port of the
ProxyServer and the other end into the RS232 cable from
the PC serial port. See Figure 3.
3. Connect a network cable to the ETHERNET 10BASET
connector on the back of the ProxyServer. Connect the
other end of the cable to your network.
4. Connect one end of the RJ48 cable to the 56K DSU
connector on the back of the ProxyServer. Connect the
other end to your DDS WAN connection.
5. If you wish to use the optional RS232 port for dial back-up,
connect one end of an RS232 cable to the RS232/V.35
connector on the back of the ProxyServer and connect the
other end of the cable to an external DCE device such as
a modem or T1 CSU.
5. Turn on power to the ProxyServer by placing the ON/OFF
switch on the back panel to the ON position. Wait for the
FAIL LED on the ProxyServer to go OFF before
proceeding. This may take a couple of minutes to go OFF.
At this time your ProxyServer is completely cabled. Proceed
to the next section to load the ProxyServer software.
Autres manuels pour ProxyServer MTPSR2-201
1
Table des matières
Autres manuels Multitech Porte
Multitech
Multitech Conduit 300 Series Instructions d'installation
Multitech
Multitech MultiVOIP MVP2400 Manuel utilisateur
Multitech
Multitech E1 Manuel utilisateur
Multitech
Multitech Conduit MTCDT-L4E1 Instructions d'installation
Multitech
Multitech Conduit MTCDT-246L-US-EU-GB Instructions d'installation
Multitech
Multitech CallFinder CF100FX2-G Manuel utilisateur
Multitech
Multitech MULTIVOIP MVP-130 Manuel
Multitech
Multitech MultiVOIP MVP400 Manuel utilisateur
Multitech
Multitech MultiVOIP MVP200 Manuel utilisateur
Multitech
Multitech MultiVOIP MVP110 Manuel utilisateur
Multitech
Multitech MultiVOIP MVP200 Manuel utilisateur
Multitech
Multitech Conduit AP MTCAP-L4E1 Manuel utilisateur
Multitech
Multitech MULTIVOIP MVP-210 Manuel utilisateur
Multitech
Multitech MULTIVOIP MVP-210 Manuel utilisateur
Multitech
Multitech MultiVOIP MVPFXS-8 Manuel utilisateur
Multitech
Multitech MVP-2410, MVP-3010 Manuel utilisateur
Multitech
Multitech MultiVOIP MVPGK1 Gatekeepers Manuel utilisateur
Multitech
Multitech MULTIVOIP MVP-210 Manuel utilisateur
Multitech
Multitech MultiVOIP GSM SIP-to-Cellular Gateways... Manuel utilisateur
Multitech
Multitech MULTIVOIP MVP-130 Manuel utilisateur
Manuels Porte populaires d'autres marques
LST
LST M500RFE-AS Manuel utilisateur
Kinnex
Kinnex Media Gateway Manuel utilisateur
2N Telekomunikace
2N Telekomunikace 2N StarGate Manuel utilisateur
Mitsubishi Heavy Industries
Mitsubishi Heavy Industries Superlink SC-WBGW256 Manuel utilisateur
ZyXEL Communications
ZyXEL Communications ZYWALL2 ET 2WE Manuel utilisateur
Telsey
Telsey CPVA 500 - SIP Manuel utilisateur
