MSI MS-6176 Manuel utilisateur
CHAPTER 1 INTRODUCTION
1-1
TheMS-6176MicroLPXWH4mainboardisahigh-performanceall-in-one
computermainboard based on Intel®810 (810/810 DC100/810e) chipset. The
MS-6176 is designed for the Intel®CeleronTM processor for inexpensive
business/personal desktop markets.
The Intel®810 chipset is the first generation Integrated Graphics chipset for
the Intel®CeleronTM processor. The graphics accelerator architecture
consists of dedicated multi-media engines executing in parallel to deliver
high performance 3D, 2D, and motion compensation video capabilities. An
integrated centralized memory arbiter allocates memory bandwidth to
multiple system agents to optimize system memory utilization. A new
chipset component interconnect, the hub interface, is designed into the Intel
810 chipset to provide an efficient communication channel between the
memory controller hub and I/O hub controller.
The series of Intel®810 chipset contains three core components: the
GraphicsandMemoryControllerHub(GMCH),theI/OControllerHub(ICH)
andtheFirmware Hub (FWH). The GMCH integrates a 66/100MHz for 810
and810DC100and66/100/133MHzfor810e,P6familysystembuscontrol-
ler, 2D/3D graphics accelerator, 100MHz SDRAM controller and high-speed
hub interface for communication with the ICH. The ICH integrates an Ultra
ATA33(ICHO)/66(ICH)controller,USB hostcontroller,LPC interface
controller, FWH interface conroller,PCI interface controller,AC’97 digital
controller and a hub interface for communication.
The Intel®82802 Firmware Hub (FWH) component is part of the seried of
Intel®810 chipset. The FWH is key to enabling future security and manage-
ability infrastructure for the PC platform.
Chapter 1
INTRODUCTION
CHAPTER 1 INTRODUCTION
1-2
1.1 Mainboard Features
CPU
lSupport Socket370 for Intel®CeleronTM processor.
lSupport300MHz,333MHz, 366MHz,400MHz,433MHz, 466Mhz,533MHz
or higher
Chipset
lIntel®(GMCH)chipset. (421 BGA)
- Integrated Graphics Controller
-VGAmemory supports up to 133MHz FSB (810e)
- Intel DDM Architecture
- SDRAM memory Independent of System Bus
lIntel®ICHchipset. (241 BGA)
- AC’97 Controller Integrated
- 2 full IDE channels, up to ATA66
- Low pin count interface for SIO
FrontSide Bus (FSB)
lFor810e:66/68/75/100/112/117/129/133/138/140/150 MHzclocks are
supported.
lFor810DC100:66/68/75/100/112/117/124/129/133/138/140/150 MHzclocks
are supported.
MainMemory
lSupport two 168-pin DIMM sockets.
lSupporta maximum memory size of 256MB(64Mbit technology) or
512MB(128Mbittechnology) SDRAM.
On-BoardIDE
lAn IDE controller on the ICH chipset provides IDE HDD/CD-ROM with
PIO, Bus Master and Ultra DMA/66 operation modes.
lCan connect up to four IDE devices.
CHAPTER 1 INTRODUCTION
1-3
On-BoardPeripherals
lOn-BoardPeripherals include:
-1 floppy port supports 2 FDD with 360K, 720K, 1.2M, 1.44M and
2.88Mbytes.
- 2 serial connectors(COM A + COM B)
- 1 parallel port supports SPP/EPP/ECP mode
-2USB port
- 1 IrDA connector for Consumer IR/SIR.
- 1 Audio port Rear Panel
- 3 Audio connector for Front Panel
Video
lGMCH chip integrated
l2D/3DGraphics
lOnboard 4MB Display Cache
lSupport PTI/AMR slot
Audio
lICH chip integrated
Network
lIntel82559 10/100M Ethernet
- WFW baseline & NET PC specs compliant
- Advanced Power Management (ACPI support)
- Integrated Alert On LANTM
- ARP& Flexible framefiltering
- Software drivers are backwards compatible
BIOS
lThe mainboard BIOS provides “Plug & Play” BIOS which detects the
peripheral devices and expansion cards of the board automatically.
lThe mainboard provides a Desktop Management Interface(DMI) function
which records your mainboard specifications.
lACPI(Advanced Configuration and Power Interface) feature.
CHAPTER 1 INTRODUCTION
1-4
Note: To be able to identify the chipset used onboard. During POST
(Power on Self Test), you can determine the chipset, which will
appear briefly at the bottom left of the POST screen.
Dimension
lµLPXForm Factor: 26cm(L) x28.6cm(W) x4 layersPCB
Mounting
l6 mounting holes.
OtherFeatures
lKeyboard Password Wake-Up (reserved)
lLANWake-Up
lInternal/ExternalModemWake-Up
CHAPTER 1 INTRODUCTION
1-5
1.2 Mainboard Layout
MS-6176MICROLPXWH4Mainboard
ATX
Power Supply
Socket 370
DIMM 2
DIMM 1
ICH
SDRAM SDRAM
FWH
Intel
GMCH
Chipset
(810 DC100/810e)
VGAPort RJ-45 LPT Speaker T: mouse
B:
keyboard
GamePort
DiagnosticLED
FDD1
IDE2
IDE1
COM A
BATT
+
Riser Card Connector
Intel
82559
Chipset
JWOL1
W83627HF
JMDM1
JRMS1
JKBV1
JMDM2
JLAN1
USB3
JUSBV
IR2
SYSFAN
JBAT1
JFP1
CPUFAN
SW1
SOUND2
JSPL1 JSPR1
JCD1
JAUX1
JTAD1
CHAPTER 2 HARDWARE INSTALLATION
2-1
Chapter 2
Hardware Installation
2.1 Central Processing Unit: CPU
The mainboard operates with Intel®CeleronTM processor. The mainboard
uses a CPU socket called Socket 370 for easy CPU installation. The CPU
should always have a Heat Sink and a cooling fan attached to prevent
overheating.
CPU
CPU
3. Press the lever down to
complete the installation.
2. Locate Pin 1 in the socket
and look for the white dot or
cut edge in the CPU. Match
Pin 1 with the white dot/cut
edge. Then, insert the CPU.
It should insert easily.
OpenLever
Pin1
Sliding
Plate
White dot/
Cut edge
Close
Lever
1. Pull the lever sideways away
from the socket. Then, raise
the lever up to a 90-degree
angle.
Pin1
2.1-1 CPU Installation Procedures
CHAPTER 2 HARDWARE INSTALLATION
2-2
The mainboard CPU Bus Frequency can be set through BIOS setup
If CPUClock = 66MHz
Core/Bus ratio = 3.5
then CPU core speed = Host Clock x Core/Busratio
= 66MHzx3.5
= 233MHz
2.1-2 CPU Core Speed Derivation Procedure
CHAPTER 2 HARDWARE INSTALLATION
2-3
2.1-3 Fan Power Connectors: CPUFAN & SYSFAN
These connector support system cooling fan with + 12V. It supports three
pin head connector. When connecting the wire to the connector, always
take note that the red wire is the positive and should be connected to the
+12V, the black wire is Ground and should be connected to GND. If your
mainboard has System Hardware Monitor chipset on-board, you must use a
specially designed fan with speed sensor to take advantage of this function.
For fans with fan speed sensor, every rotation of the fan will send out 2
pulses. System Hardware Monitor will count and report the fan rotation
speed.
SYSFAN
CPUFAN: Processor Fan
SYSFAN: SystemFan
+12V
SENSOR
GND
CPUFAN
+12V
SENSOR
GND
CHAPTER 2 HARDWARE INSTALLATION
2-4
2.2 Clear CMOS Jumper: JBAT1
A battery must be used to retain the mainboard configuration in CMOS
RAM. To retain the on-board battery you must always short pins 1-2 of
JBAT1.
Note: You can clear CMOS by shorting 2-3 pin, while the system is
off. Leave for about 5 to 10 seconds. Then, return to 1-2 pin
position. Avoid clearing the CMOS while the system is on for
it will damage the mainboard. Always unplug the power cord
from the wall socket.
Keep Data
Clear Data
13
JBAT1 Function
1
3
JBAT1
(Default)
1
3
CHAPTER 2 HARDWARE INSTALLATION
2-5
2.3 Memory Installation
2.3-1 Memory Bank Configuration
Themainboardsupportsamaximummemorysizeof256MB(64-bittechnol-
ogy) or 512MB(128-bit technology for SDRAM: It provides two 168-pin
unbuffered DIMMs (Double In-Line Memory Module) sockets. It supports
8 MB to 128 Mbytes DIMM memory module.
DIMM1(Bank0+ Bank1)
DIMM2(Bank2+Bank3)
Ce manuel convient aux modèles suivants
2
Autres manuels MSI Carte mère
MSI
MSI G52-S9617X1 Manuel utilisateur
MSI
MSI H410I PRO WIFI Manuel utilisateur
MSI
MSI H61M-P22 G3 Series Manuel utilisateur
MSI
MSI B250M BAZOOKA Manuel utilisateur
MSI
MSI MS-7357 (V1.X) Manuel utilisateur
MSI
MSI MS7797 Manuel utilisateur
MSI
MSI Z790-S01 Manuel utilisateur
MSI
MSI Z77A-GD65 GAMING series Manuel utilisateur
MSI
MSI MPG Z690 CARBON WIFI Manuel utilisateur
MSI
MSI X299 RAIDER Manuel utilisateur
MSI
MSI MS-5156 Manuel utilisateur
MSI
MSI MS-6199VA Manuel utilisateur
MSI
MSI MPG Z490M GAMING EDGE WIFI Manuel utilisateur
MSI
MSI 850 Pro2 Manuel utilisateur
MSI
MSI K8NNeo4 Platinum Series Manuel utilisateur
MSI
MSI 945GZM3 Series Manuel utilisateur
MSI
MSI ATX BX7 Manuel utilisateur
MSI
MSI P45 Neo Series Manuel utilisateur
MSI
MSI 970A GAMING PRO CARBON Manuel utilisateur
MSI
MSI MS-7042 Manuel utilisateur
Manuels Carte mère populaires d'autres marques
Telit Wireless Solutions
Telit Wireless Solutions SL869-3DR Manuel utilisateur
Gigabyte
Gigabyte GA-9IVDT Manuel utilisateur
Texas Instruments
Texas Instruments ADS8372EVM Manuel utilisateur
Commell
Commell MS-C73 Manuel utilisateur
IBT Technologies
IBT Technologies MB860 Manuel utilisateur
Nvidia
Nvidia TEGRA DG-04927-001_V01 Manuel utilisateur
