MSI MS-7015 Manuel utilisateur

1-1

Getting Started

Chapter 1. Getting

Started

Thank you for purchasing MS-7015 v1.X Micro-ATX

mainboard. The MS-7015 v1.X is based on VIA®Apollo KT600 &

VT8237 chipsets, provides eight USB 2.0 ports for high-speed

data transmission and C-Media 9761 chip for 6-channel audio

output. Designed to fit the advanced AMD®Athlon™,Athlon™

XP or Duron™ processors, the MS-7015 v1.X delivers a high

performance and professional desktop platform solution.

Getting Started

1-2

MS-7015 M-ATX Mainboard

Mainboard Specifications

CPU

hSupports Socket A (Socket-462) for AMD®Athlon™/Athlon™ XP /Duron™

processors.

hSupports up to 3200+.

Chipset

hVIA®Apollo KT600 chipset

- FSB @200/266/333/400 MHz.

- Supports DDR200/266/333/400 DDR SDRAM.

-AGP 8X and PCI advanced high performance memory controller.

hVIA®VT8237 chipset

- Ultra DMA 66/100/133 master mode EIDE controller.

- ACPI & PC2001 compliant enhanced power management.

- Supports 8 USB 2.0 ports

MainMemory

hSupports four memory banks using two 184-pin 200/266/333/400 DDR

SDRAMs.

hDDR400 memory supports.

hSupports up to 2GB memory size.

Slots

hOne AGP (Accelerated Graphics Port) slot.

- Supports AGP 8X.

hThree 32-bit PCI bus slots (support 3.3v/5v PCI bus interface).

On-Board IDE

hAn IDE controller on the VT8237 chipset provides IDE HDD/CD-ROM with

PIO, Bus Master and Ultra DMA133/100/66 operation modes.

- Can connect up to four Ultra ATA drives.

On-Board Peripherals

hOn-Board Peripherals include:

- 1 floppy port supports 2 FDDs with 360K, 720K, 1.2M, 1.44M and

2.88Mbytes

- 1 serial port (COM A)

- 1 parallel port supports SPP/EPP/ECP mode

1-3

Getting Started

- 1 audio port (SPDIF-in, SPDIF-out, Line-in, Line-out)

- 8 USB 2.0 ports (Rear * 4/ Front * 4)

- 1394 port

- RJ45 LAN port

Audio

h6 channels software audio codec C-Media 9761.

- Compliance with AC97 v2.2 Spec.

- Meet PC2001 audio performance requirement.

LAN 10/100MBps (Optional)

hVIA 6103

- Integrated Ethernet MAC and PHY transceiver, auto-negotiation

operation.

- Supports 10MB/s and 100MB/s.

- Compliance with PCI v2.2 and LAN on Motherboard (LOM) standard.

BIOS

hThe mainboard BIOS provides “Plug & Play” BIOS which detects the

peripheral devices and expansion cards of the board automatically.

hThe mainboard provides a Desktop Management Interface (DMI) function

which records your mainboard specifications.

hACPI, 1.0a, APM1.2, PnP 1.0a, SMBIOS 2.3, USB 2.0, WFM 2.0, Overclock,

Boot from USB device.

Dimension

hATX Form Factor: 24.5 cm (L) x 24.5 cm (W).

Mounting

h6 mounting holes.

1-4

MS-7015 M-ATX Mainboard

Mainboard Layout

MS-7015 v1.X Micro-ATX Mainboard

DDR1

DDR2

AGP Slot

SOCKET 462

Top : mouse

Bottom: keyboard

T: R J 4 5 L AN j a c k

B: USB ports

T: 1394 Port

B: USB ports

JL_IN1

JVEDIO1

Codec

VIA

VT6103

VIA

VT6306

BATT

BIOS

Winbond

83697HF

VIA

VT8237

VIA

KT600

IDE1

IDE2

FDD1

PCI Slot 1

PCI Slot 2

PCI Slot 3

JAUDIO1 J9 JUSB2 JUSB1

CPUFA1

SYSFA1

JPW1

ATX

PowerSupply

F_P1

SW2

SW1

JBAT1

JSLP1

SPDIF-In

-Out

Line-in

SPDIF-

Center/Subwoofer

Surrounding

Line-out

Top : L P T

Bottom:

COM A

2-1

Hardware Setup

Chapter 2. Hardware

Setup

This chapter tells you how to install the CPU, memory

modules, and expansion cards, as well as how to setup the

jumpers on the mainboard. Also, it provides the instructions on

connecting the peripheral devices, such as the mouse, keyboard,

etc.

While doing the installation, be careful in holding the

components and follow the installation procedures.

Hardware Setup

2-2

MS-7015 M-ATX Mainboard

Quick Components Guide

JL_IN1,p.2-18

DDR DIMMs, p.2-6

CPU, p.2-3

Back Panel I/O,

p.2-9

CPUFA1, p.2-14

FDD1, p.2-14

JUSB1 & JSUB2,

p.2-17

J9, p.2-16

JSLP1, p.2-17

AGP Slot, p.2-22

PCI Slots, p.2-22

IDE1 & IDE2,

p.2-15

SW1, SW2, p.2-21

SYSFA1, p.2-14

JVEDIO1, p.2-18

F_P1, p.2-19

JPW1, p.2-8

CONN1, p.2-8

JBAT1, p.2-20

J7, p.2-18

JAUDIO1, p.2-19

2-3

Hardware Setup

Central Processing Unit: CPU

CPU Core Speed Derivation Procedure

If CPU Clock = 100MHz

Core/Bus ratio = 14

then CPU core speed = Host Clock x Core/Bus ratio

= 100MHz x 14

= 1.4 GHz

The mainboard supports AMD®Athlon™, Athlon™ XP and Duron™

processors in the 462 pin package. The mainboard uses a CPU socket called

Socket-462 for easy CPU installation. When you are installing the CPU, make

sure the CPU has a heat sink and a cooling fan attached on the top to

prevent overheating. If you do not find the heat sink and cooling fan, contact

your dealer to purchase and install them before turning on the computer.

ThermalIssueforCPU

AMD Athlon™/Athlon™ XP/Duron™ processor with a speed

of 600MHz and above requires LARGER heatsink and fan.

You also need to add thermal grease between the CPU and

heatsink to improve heat dissipation. Then, make sure that the

CPU and heatsink are securely fastened and in good contact

with each other. These are needed to prevent damaging the processor and

ensuringreliableoperation.Youcan checkAMD’s websitefor moreinformation.

WARNING!

Memory Speed/CPU Clock Support Matrix

○:Yes.

X: Not available .

CPUClock

Memory DDR 266

133MHz

DDR 333 DDR 400

166MHz

200MHz

○

DDR200

X○

100MHz ○X

○

2-4

MS-7015 M-ATX Mainboard

1. Please turn off the power and

unplug the power cord before

installing the CPU.

2. Pull the lever sideways away

from the socket. Make sure

to raise the lever up to a 90-

degree angle.

3. Look for the gold arrow. The

gold arrow should point to-

wards the lever pivot. The

CPU can only fit in the correct

orientation.

4. If the CPU is correctly

installed, the pins should be

completely embedded into the

socket and can not be seen.

Please note that any violation

of the correct installation pro-

cedures may cause permanent

damages to your mainboard.

5. Press the CPU down firmly

into the socket and close the

lever. As the CPU is likely to

move while the lever is being

closed, always close the lever

with your fingers pressing

tightly on top of the CPU to

make sure the CPU is properly

and completely embedded

into the socket.

CPU Installation Procedures for Socket 462

Open Lever

Gold arrow

90 degree

Correct CPU placement

Incorrect CPU placement

Gold arrow

Sliding

Plate

Lever

Press down

the CPU

2-5

Hardware Setup

The following instructions will guide

you through the heat sink installation

procedures. Please consult your agent

for the proper CPU cooler set.

1. Position your CPU cooler set onto

the CPU.

2. Use one end of the clip to hook

the latch of the CPU sliding plate.

3. Hook the other latch to fix the

cooling fan set. You may need a

screw drive to press down the

other side of the clip.

4. Connect the fan to the power sup-

ply connector provided on your

mainboard.

Installing AMD Athlon CPU (Socket 462) Cooler Set

Apply some heat

sink paste

MSIRemindsYou...

Please apply some heat sink paste on top of CPU to dissipate

the heat more effectively.

2-6

MS-7015 M-ATX Mainboard

The mainboard provides 2 slots for 184-pin DDR SDRAM DIMM

(Double In-Line Memory Module) modules and supports the memory size up

to2GB.YoucaninstallPC3200/DDR400,PC2700/DDR333,PC2100/DDR266or

PC1600/DDR200 modules on the DDR DIMM slots (DDR 1~2).

Memory

DIMM1 & DIMM2

Introduction to DDR SDRAM

DDR (Double Data Rate) SDRAM is similar to conventional SDRAM,

but doubles the rate by transferring data twice per cycle. It uses 2.5 volts as

opposedto 3.3volts usedin SDRSDRAM, andrequires 184-pinDIMM modules

rather than 168-pin DIMM modules used by SDR SDRAM. High memory

bandwidth makes DDR an ideal solution for high performance PC, workstations

and servers.

Table des matières

Autres manuels MSI Carte mère

MSI

MSI P55M-GD41 Series Manuel utilisateur

MSI

MSI KT4A-V Manuel utilisateur

MSI

MSI H170A PC MATE Manuel utilisateur

MSI

MSI Z87-G43 GAMING Manuel utilisateur

MSI

MSI X299 TOMAHAWK Manuel utilisateur

MSI

MSI B360-A PRO Manuel utilisateur

MSI

MSI Wind Board 330 Manuel utilisateur

MSI

MSI MPG X570S Carbon EK X Manuel utilisateur

MSI

MSI MS-96B3 Manuel utilisateur

MSI

MSI G52-72801X2 Manuel utilisateur

MSI

MSI MS-7235 Manuel utilisateur

MSI

MSI MAG B660M BAZOOKA Manuel utilisateur

MSI

MSI K8T Neo2-F Manuel utilisateur

MSI

MSI Z68A-GD65 B3 series Manuel utilisateur

MSI

MSI MS-6567 Manuel utilisateur

MSI

MSI Z77A-G41 Series Manuel utilisateur

MSI

MSI AmethystM Manuel utilisateur

MSI

MSI MS-6114 Manuel utilisateur

MSI

MSI A320M PRO-C Manuel utilisateur

MSI

MSI B250M BAZOOKA Manuel utilisateur

MSI

MSI Z97 GAMING 3 Manuel utilisateur

MSI

MSI MS-16D3 Manuel utilisateur

MSI

MSI B450 GAMING PLUS MAX Manuel utilisateur

MSI

MSI H67MA-E35 series Manuel utilisateur

Manuels Carte mère populaires d'autres marques

DFI

DFI SD170 Manuel utilisateur

ASROCK

ASROCK ROMED8-2T Manuel utilisateur

Asus

Asus P2L97A Manuel utilisateur

Winmate

Winmate IC70 Manuel utilisateur

Asus

Asus MES-B Manuel utilisateur

Grantech

Grantech SYS8F377VGGA-3OMN Manuel utilisateur

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manuel utilisateur

Gigabyte

Gigabyte GA-9IVDT Manuel utilisateur

Texas Instruments

Texas Instruments ADS8372EVM Manuel utilisateur

Commell

Commell MS-C73 Manuel utilisateur

IBT Technologies

IBT Technologies MB860 Manuel utilisateur

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manuel utilisateur

Biostar

Biostar M7VIT Bravo Instructions d'utilisation et d'installation

Intel

Intel D33217CK Manuel utilisateur

Asus

Asus F1A55-M LX PLUS R2.0 Manuel utilisateur

EPC

EPC EPC9147C Manuel utilisateur

Asus

Asus EX-B760M-V5 D4 Manuel utilisateur

EPOX

EPOX MU-8KHA0010 Manuel utilisateur