MSI MS-6199VA Manuel utilisateur

CHAPTER 1 INTRODUCTION

1-1

The MS-6199VA ATX VIA mainboard is a high-performance personal

computer mainboard based on the Intel®Pentium®II/III processor. The Intel®

Pentium®II/III processor supports MMXTM (Multimedia Extension) technol-

ogy.

The mainboard uses the highly integrated VIA®VT82C693A chipset to

support the PCI/ISA and Green standards, and to provide the Host/AGP

bridge. TheVIA®VT82C596B chipset integrates all system control functions

such as ACPI (Advanced Configuration and Power Interface). The ACPI

provides more Energy Saving Features for the OSPM(OS Direct Power

Management) function. The VIA®VT82C596B chipset also improves the

IDE transfer rate by supporting Ultra DMA 33/66 IDE that transfers data at

the rate of 33/66MB/s.

The mainboard also supports the System Hardware Monitor Controller. Its

functions include: CPU /power supply/chassis fan revolution detect, CPU/

system voltage monitor, system temperature monitor, chassis intrusion

detect and TOP TECH III as an optional function.

Chapter 1

INTRODUCTION

CHAPTER 1 INTRODUCTION

1-2

1.1 Mainboard Features

CPU

lSlot 1 for Intel®Pentium®II/III or CeleronTM processor.

lSupports233MHz,266MHz,300MHz,333MHz,350MHz,400MHz,

450MHz,500MHz,and faster.

Chipset

lVIA®VT82C693Achipset+VT82C596B

FSB(FrontSideBus)

l66.6MHz, 100MHz, 133MHz and faster clocks are supported.

MainMemory

lSupports six memory banks using three 168-pin unbuffered DIMM.

lSupportsamaximum memory sizeof 1.5G.

lSupportsECC(1-bit Error Code Correct) function.

lSupports 3.3v SDRAM DIMM.

Slots

lOne AGP slot.

- AGP specification compliant

- AGP66/133MHz 3.3v device support

lFive 32-bit Master PCI Bus slots and two 16-bit ISA Bus slots (wherein

one slot is shared).

*See page 2-34 for further details on PCI slots.

lSupports 3.3v/5v PCI bus Interface.

On-BoardIDE

lAnIDE controlleron the VT82C596B Chipset provides IDE HDD/CD-

ROM with PIO, Bus Master and Ultra DMA/66 operation modes.

lCan connect up to four IDE devices.

CHAPTER 1 INTRODUCTION

1-3

On-BoardPeripherals

lOn-BoardPeripherals include:

-1 floppy port supports 2 FDD with 360K, 720K, 1.2M, 1.44M and

2.88Mbytes.

- 2 serial port (COM A + COM B)

- 1 parallel port supports SPP/EPP/ECP mode

- 2 USB ports

- 1 IrDA connector for SIR.

- 1 Audio port ( Line_Out, Line_In, and Mic_In Jack) and 1 MIDI/

GamePort

Audio (Optional)

lCreative®ES1373

-Running on PCI BUS.

-64 Voice and AC3 Capable

- Support Direct Sound and Direct Sound 3D

-AC97’Compliant

- Support SPDIFTM output

BIOS

lThe mainboard BIOS provides “Plug & Play” BIOS which detects the

peripheral devices and expansion cards of the board automatically.

lThe mainboard provides a Desktop Management Interface(DMI) function

which records your mainboard specifications.

lACPI(Advanced Configuration and Power Interface) feature.

lAnti-virus BIOS function.

lBIOS Lock function.

Dimension

lATXForm Factor : 30.4cm(L)x19.2cm(W)x 4 layersPCB

Mounting

l6 mounting holes.

CHAPTER 1 INTRODUCTION

1-4

SystemHardwareMonitor

lCPU/Power Supply/Chassis Fan Revolution Detect

lCPU Fan Control detects the CPU temperature, then determine the FAN

SPEED,which utilizes PC Alert program (the fan will automatically stop

when the system enters suspend mode)

lSystem Voltage Detect

lAdded 5VSB and Battery Voltage Detect

lCPU Overheat Warning.

lDisplay Actual Current Voltage

lChassis Intrusion

OtherFeatures

lKeyboard Password Wake-Up

lLAN Wake-Up

lInternal/External Modem Wake-Up

CHAPTER 1 INTRODUCTION

1-5

1.2 Mainboard Layout

MS-6199 ATX VIA Mainboard

PCI SLOT 3

PCI SLOT 2

PCI SLOT 1

ISA SLOT 2

ATX

Power Supply

SLOT 1

DIMM 2

Top: Mouse

Bottom:

Keyboard

Top:Port1

USB

DIMM 1

IDE2

Bottom:

Port2

IDE1

FDD

JMDM1

JFP

JGS1

JBAT1

BIOS

JPHONE:MDM_IN

JAUX: AUX_IN

CPUFAN

JSOR1

JRMS1

PSFAN

BATT

Top: LPT

Bottom:

COM1/

COM2

Top: Midi/

GamePort

Bottom:

Line-Out

Line-In

Mic

JCD: CD_IN SW2

JKBV

System

Hardware

Monitor

(optional)

AGP SLOT

JCASE

DIMM 3

PCI SLOT 4

PCI SLOT 5

ISA SLOT 1

JWOL1

SYSFAN

WINBOND

W83977EF-AW

JT3

Creative

ES1373

(Optional)

SW3

DiagnosticLED

2345

VT82C693A

VT82C596B

CHAPTER 2 HARDWARE INSTALLATION

2-1

Chapter 2

HARDWARE INSTALLATION

2.1 Central Processing Unit: CPU

Step 1: Install the Retention Mechanism.

Attach the Retention Mechanism to the Mainboard. Push the Plastic

lock to secure the Retention Mechanism into the mainboard.

Secure the processor by

pulling up the Retention

Mechanism Processor

Lock

Insert the processor

like inserting a PCI or

an ISA card

To release the

processor, push the

Retention Mechanism

Processor lock down

Step 2: Install the Processor.

Insert the Processor like inserting a PCI or an ISA card.

Step 3: Lock the Processor.

Lock the processor by pulling up the Retention Mechanism

processor lock shown above.

Note: The Retention Mechanism processor lock can only lock S.E.C.C. 2

and S.E.P.P. processor.

2.1-1 Processor Installation Procedure

CHAPTER 2 HARDWARE INSTALLATION

2-2

2.1-2 CPU Core Speed Derivation Procedure

1. This mainboard can auto-detect the Core/Bus (Fraction) ratio of the CPU

If CPUClock = 66MHz

Core/Bus ratio = 3.5

then CPU core speed = Host Clock x Core/Bus ratio

= 66MHzx3.5

= 233MHz

Note: CPU Vcore and Vi/o can be modified through CMOS.

Vcoreis for CPU.

Vi/oisforNorthbridge (VT82C693A).

CHAPTER 2 HARDWARE INSTALLATION

2-3

2.1-3 Overclocking Jumper: SW2/SW3

Overclocking is a process of operating a CPU/Processor beyond its

specified frequency. SW2/SW3 is used for overclocking.

SW2

SW3

SW2 SW3 Feature

Automatically detect 66MHz, 100MHz,

133MHz CPU Bus Frequency

Virtually set CPU Bus Frequency

into 100MHz

Virtually set CPU Bus Frequency

into 133MHz

Note If you used this jumper for overclocking, you also need to modify the

CPU Bus ratio thorugh CMOS.

CHAPTER 2 HARDWARE INSTALLATION

2-4

2.1-4 Fan Power Connectors: CPUFAN/PSFAN/SYSFAN

These connectors support system cooling fan with +12V. It supports three

pin head connector. When connecting the wire to the connector, always

take note that the red wire is the positive and should be connected to the

+12V, the black wire is Ground and should be connected to GND. If your

mainboard has System Hardware Monitor chipset on-board, you must use a

specially designed fan with speed sensor to take advantage of this function.

For fans with fan speed sensor, every rotation of the fan will send out 2

pulses. System Hardware Monitor will count and report the fan rotation

speed.

SENSOR

+12V

GND

PSFAN

SENSOR

+12V

GND

CPUFAN

PSFAN : Power Supply Fan

CPUFAN : Processor Fan

SYSFAN : System(Chassis) Fan

SYSFAN

Note: 1. Always consult vendor for proper CPU cooling fan.

2. CPU FAN supports the FAN control, you can install PC Alert

utility, this will automatically set the CPU FAN Speed by CPU

temperature.

SENSOR

+12V

GND

CHAPTER 2 HARDWARE INSTALLATION

2-5

2.2 Clear CMOS Jumper: JBAT1

A battery must be used to retain the mainboard configuration in CMOS

RAM. Short 1-2 pins of JBAT1 to store the CMOS data.

Keep Data Clear Data

Note: You can clear CMOS by shorting 2-3 pin, while the system is off.

Then, return to 1-2 pin position. Avoid clearing the CMOS while

the system is on, it will damage the mainboard. Always unplug

the power cord from the wall socket.

JBAT1

Table des matières

Autres manuels MSI Carte mère

MSI

MSI B75A-E33 Series Manuel utilisateur

MSI

MSI Z77A-G41 Series Manuel utilisateur

MSI

MSI K8N SLI-F Manuel utilisateur

MSI

MSI MAG B550M MORTAR WIFI Manuel utilisateur

MSI

MSI G52-S9617X1 Manuel utilisateur

MSI

MSI BIG BANG MARSHAL (B3) Manuel utilisateur

MSI

MSI 845E Max2 Series Manuel utilisateur

MSI

MSI K9A2 CF Manuel utilisateur

MSI

MSI MAG B560 TORPEDO Manuel utilisateur

MSI

MSI Z490-A PRO Manuel utilisateur

MSI

MSI K9N2GM-FD - Motherboard - Micro ATX Manuel utilisateur

MSI

MSI K7N2GM-V Manuel utilisateur

MSI

MSI Z170A SLI PLUS Manuel utilisateur

MSI

MSI Z490 GAMING CARBON WIFI Manuel utilisateur

MSI

MSI H170M PRO-VDH Manuel utilisateur

MSI

MSI PRO Z790-A MAX WIFI Manuel utilisateur

MSI

MSI RX480M2 MS-7093 Manuel utilisateur

MSI

MSI 875P Neo P Series Manuel utilisateur

MSI

MSI MS-6382 Manuel utilisateur

MSI

MSI B450M-A PRO MAX Manuel utilisateur

MSI

MSI K8M Neo-V Manuel utilisateur

MSI

MSI G31M3 Series Instructions d'utilisation

MSI

MSI MPG B550I GAMING EDGE WIFI Manuel utilisateur

MSI

MSI MS-98D3 Manuel utilisateur

Manuels Carte mère populaires d'autres marques

DFI

DFI SD170 Manuel utilisateur

ASROCK

ASROCK ROMED8-2T Manuel utilisateur

Asus

Asus P2L97A Manuel utilisateur

Winmate

Winmate IC70 Manuel utilisateur

Asus

Asus MES-B Manuel utilisateur

Grantech

Grantech SYS8F377VGGA-3OMN Manuel utilisateur

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manuel utilisateur

Gigabyte

Gigabyte GA-9IVDT Manuel utilisateur

Texas Instruments

Texas Instruments ADS8372EVM Manuel utilisateur

Commell

Commell MS-C73 Manuel utilisateur

IBT Technologies

IBT Technologies MB860 Manuel utilisateur

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manuel utilisateur

Biostar

Biostar M7VIT Bravo Instructions d'utilisation et d'installation

Intel

Intel D33217CK Manuel utilisateur

Asus

Asus F1A55-M LX PLUS R2.0 Manuel utilisateur

EPC

EPC EPC9147C Manuel utilisateur

Asus

Asus EX-B760M-V5 D4 Manuel utilisateur

EPOX

EPOX MU-8KHA0010 Manuel utilisateur