Mr Beam II dreamcut ready Manuel utilisateur
dreamcut
When you start up your Mr Beam II dreamcut / dreamcut
ready, remember that it has been assembled and packed
by us with great care. We hope that you will take the time to
unpack and set it up carefully.
Munich, 01 December 2019 | Rev. 1.3
EN
DESKTOP LASERCUTTER
QUICK START GUIDE
1
!
SAFETY INSTRUCTIONS
Only process materials that Mr Beam Lasers
has classified as harmless. You can find an
up-to-date list of materials at mr-beam.org
Never process PVC, Vinyl, ABS, coated carbon
fiber, fiberglass or other materials containing
chlorine!
Processing these materials with your Mr Beam
will produce extremely toxic vapours, which can
cause machine damage and health hazard.
Before using your Mr Beam, please read and
understand the user manual and the safety
instructions.
You can find the latest manual and safety
instructions in the menu of your Mr Beam user
interface and on mr-beam.org
You can find the latest version of this Quick
Start Guide, as well as that of previous modells,
and some other information about your Mr
Beam at the following QR Code.
At www.mr-beam.org/support, you will also
find answers to many questions regarding Mr
Beam.
2
Air Filter System
SCOPE OF DELIVERY - WITH AIR FILTER SYSTEM
LASER HEAD
MR BEAM
AIR FILTER SYSTEM
2 KEYS
FOCUS TOOL
HOSE
CABLE AIR FILTER
POWER CABLE
POWER SUPPLY UNIT
SUCTION SOCKET
SCREWS
WASHERS
3
Air Filter System
LASER HEAD
MR BEAM
2 KEYS
FOCUS TOOL
HOSE
POWER CABLE
POWER SUPPLY UNIT
SUCTION SOCKET
FAN
SCREWS
WASHERS
SCOPE OF DELIVERY - WITHOUT AIR FILTER SYSTEM
For indoor use we recommend a Mr Beam Air Filter System. If you
don‘t have one yet, order it now from our shop at store.mr-beam.org
4
UNPACKING MR BEAM
Remove the transport safeguard inside the
device carefully.
First, remove the small box on the side. The
laser head, the power adapter, the key and the
Focus Tool are inside it.
5
AIR FILTER
SYSTEM
SETTING UP MR BEAM
Network connection
(Ethernet)
6
!
!
CONNECTING THE LASER HEAD TO X-AXIS
Tighten the knurled screw moderately with two
fingers.
Then connect both the hose (only in the
„dreamcut“ model), as well as the ribbon cable
to the laser head.
Remove the sticker from the back side of the
laser head.
Mount the laser head to the base plate using
the knurled screw.
The black bracket fixes the ribbon cable to
the socket.
To disconnect the cable, pull out the bracket
about 2 mm carefully. For fastening, press in
the bracket on both sides.
To connect and disconnect the laser head, Mr
Beam must be disconnected from the power
supply system!
To adjust the laser focus to different material
heights, the base plate can be mounted at
different heights. You can make fine adjust-
ments using the knurled screw and the slotted
hole in the base plate.
See the chapter: Mr Beam Focusing
7
!
AIR FILTER
SYSTEM
Air Filter System
CONNECTION OF THE SUCTION / AIR FILTER SYSTEM
If you operate your Mr Beam without Mr Beam
Air Filter System, you are obliged to ensure that
the waste air is discharged properly.
To do this, direct the waste air outdoors or
connect the hose to an existing waste system.
Fix the hose carefully and prevent the waste air
from entering the room.
Screw the elbow to the end of the hose
(left-hand thread).
Connect the Mr Beam Air Filter System or
suction fan to your Mr Beam.
Screw the contra-angle incl. hose to the
housing using the knurled screws.
Also connect the Mr Beam Air Filter System or
suction fan with the appropriate cable.
8
Wartungs-undInspektionstŠtigkeiten
dŸrfennur im ausgeschalteten
Zustandvon geschultem Personal
durchgefŸhrtwerden.
VorBeginnvon Reinigungs- und
WartungsarbeitendasGerŠt immer
ausschaltenund den Netzstecker ziehen.
Vorsicht-sichtbares Laserlicht Klasse 4,
wennAbdeckunggešffnet
undSicherheitsverriegelungŸberbrŸckt
BestrahlungvonAuge und Haut
durchdirekteoder Streustrahlung vermeiden
BeiAbwesenheit
SchlŸsseldes
SchlŸsselschaltersabziehen
Laser Klasse 1
Model:Mr Beam
MrBeam Lasers UG
Gollierstr.70d
80339Munich, Germany
www.mr-beam.org
Madein Germany
Input:19V 3.42Amax
AIRFILTER
SYSTEM
Wartungs-und InspektionstŠtigkeiten
dŸrfennur im ausgeschalteten
Zustandvon geschultem Personal
durchgefŸhrtwerden.
VorBeginn von Reinigungs- und
Wartungsarbeitendas GerŠt immer
ausschaltenund den Netzstecker ziehen.
Vorsicht- sichtbares Laserlicht Klasse 4,
wennAbdeckung gešffnet
undSicherheitsverriegelung ŸberbrŸckt
Bestrahlungvon Auge und Haut
durchdirekte oder Streustrahlung vermeide n
BeiAbwesenheit
SchlŸsseldes
SchlŸsselschaltersabziehen
Laser Klasse 1
Model: Mr Beam
Mr Beam Lasers UG
Gollierstr.70d
80339 Munich, Germany
www.mr-beam.org
Made in Germany
Input: 19V 3.42Amax
Off On
POWER SUPPLY / ON-OFF SWITCH
Turn on your Mr Beam using the key. It serves
as access control for authorized users.
To turn off your Mr Beam, press the button 5
seconds until the Status Lights turn perma-
nently red. After 15 seconds the whole system
shuts down.
To turn on your Mr Beam, briefly press the
button. The light of the laser head is switched
on immediately and after 10 seconds the Status
Lights are also switched on.
Connect the power adapter to your Mr Beam.
9
Connection options with Mr Beam
There are three options to connect Mr Beam to your computer or tablet. Choosing the most
appropriate option depends on your personal usage preference and the network available at
the location Mr Beam is set up in.
Please choose one of the following connection options and proceed with the installation in the
section “Status Lights“ on the next page.
STARTING UP
Option A: Connection via Wi-Fi
Connect your computer directly to the Wi-Fi Access Point of your Mr Beam. This is the easiest
connection option. No internet access or network infrastructure is required. You may not be
able to use the Internet on your computer while you are connected to Mr Beam. See page 11.
Option B: Connection via network cable (Ethernet) and router
Connect Mr Beam to the network router using a cable. Then, use the find.mr-beam service to
create a connection to your Mr Beam.
This option is particularly stable due to the cable connection. An internet connection is
necessary for the use of the find.mr-beam service. See page 12.
Option C: Connection via Wi-Fi and router:
Connect your Mr Beam to your network via Wi-Fi. To do this, connect Mr Beam to your Wi-Fi
using the Wi-Fi-name and password. For initial setup, you need to connect via Option A or B
first. The initial setup may be a little complicated, but in the long term, this is the most com-
fortable option that many users prefer. See page 13.
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Mr Beam Coupeur
![Mr Beam dreamcut [x] Manuel utilisateur](/data/manuals/u7/3/u73x/sources/mr-beam-dreamcut-x--manual.jpg "Mr Beam dreamcut [x] Manuel utilisateur")
