Page 2 01 - Welcome
Warning: These operating instructions
must be carefully read and observed before
using Mr Beam for the first time. Non-ob-
servance of individually listed points in the
instructions manual can cause personal
injury and/or property damage!
No part of this manual may be repro-
duced, edited or otherwise modified in
any form without the prior written consent
of Mr Beam Lasers GmbH. The rights for
reproduction in any form, in particular
in electronic, print and other media, are
reserved. Mr Beam Lasers GmbH reserves
the right to change specifications of the
hardware and software described in these
user manual at any time and without prior
notice.
The following symbols are used to facilitate
the understanding of this user manual:
Warning: This area represents a special
danger for the user or the person respon-
sible for maintenance if the operating
instructions are not observed.
Warning: In these areas, pay particular
attention to the possible dangers of laser
light.
Additional accessories must be compa-
tible with the base unit (if you have any
questions, please contact Mr Beam
Support: www.mr-beam.org/ticket).
Please make sure you have the latest
version of the Mr Beam user manual.
The latest version of the user
manual can be found at:
www.mr-beam.org/en/downloads/
If your language is not included in the user
manual, you can download it from
www.mr-beam.org/en/downloads/
If you have any questions, please contact
Mr Beam Support: www.mr-beam.org/
ticket
Please keep this user manual for future
reference.
This user manual is a translation from the
original user manual in german. Mr Beam
Lasers GmbH assumes no warranty for
translation errors.
Date of this manual: 01 Novermber 2019
USING THIS USER MANUAL
![Mr Beam dreamcut [x] Manuel utilisateur](/data/manuals/u7/3/u73x/sources/mr-beam-dreamcut-x--manual.jpg "Mr Beam dreamcut [x] Manuel utilisateur")
