Moxa Technologies EDS-405 Manuel utilisateur

Moxa EtherDevice™ Switch

EDS-405 User’s Manual

Fifth Edition, June 2008

Reproduction without permission is prohibited.

Moxa EtherDeviceTM Switch

EDS-405 User’s Manual

The software described in this manual is furnished under a license agreement and

may be used only in accordance with the terms of that agreement.

Reproduction without permission is prohibited.

Trademarks

MOXA is a registered trademark of Moxa Inc.

All other trademarks or registered marks in this manual belong to their respective

manufacturers.

Disclaimer

Information in this document is subject to change without notice and does not

represent a commitment on the part of Moxa.

Moxa provides this document “as is,” without warranty of any kind, either

expressed or implied, including, but not limited to, its particular purpose. Moxa

reserves the right to make improvements and/or changes to this manual, or to the

products and/or the programs described in this manual, at any time.

Information provided in this manual is intended to be accurate and reliable.

However, Moxa assumes no responsibility for its use, or for any infringements

on the rights of third parties that may result from its use.

This product might include unintentional technical or typographical errors.

Changes are periodically made to the information herein to correct such errors,

and these changes are incorporated into new editions of the publication.

Technical Support Contact Information

www.moxa.com/support

Moxa Americas:

Toll-free: 1-888-669-2872

Tel: +1-714-528-6777

Fax: +1-714-528-6778

Moxa China (Shanghai office):

Toll-free: 800-820-5036

Tel: +86-21-5258-9955

Fax: +86-10-6872-3958

Moxa Europe:

Tel: +49-89-3 70 03 99-0

Fax: +49-89-3 70 03 99-99

Moxa Asia-Pacific:

Tel: +886-2-8919-1230

Fax: +886-2-8919-1231

Table of Contents

Chapter 1 Introduction......................................................1-1

Overview...........................................................................1-2

Package Checklist...........................................................1-3

Product Features.............................................................1-3

Panel Layout of EDS-405...............................................1-4

Panel Layout of EDS-405-MM/SS-SC..........................1-5

Panel Layout of EDS-405-MM-ST ................................1-6

Chapter 2 Installing EDS-405 ...........................................2-1

Mounting Dimensions .....................................................2-2

DIN-Rail Mounting...........................................................2-3

Wall Mounting (Optional)................................................2-4

Chapter 3 Wiring EDS-405................................................3-1

Wiring Requirements.......................................................3-2

Grounding EDS-405........................................................3-4

Wiring the Alarm Contact................................................3-4

Wiring the Redundant Power Inputs.............................3-5

Communication Connections.........................................3-6

10/100BaseT(X) Ethernet Port Connection......3-6

100BaseFX Fiber Port Connection....................3-8

Chapter 4 How to Use EDS-405 .......................................4-1

Supported Ethernet Network Topologies......................4-2

Redundant Ring Topology...................................4-2

Star-Wired Topology.............................................4-3

Moxa Turbo Ring Setup..................................................4-4

Front Panel LED Indicators............................................4-7

Dip Switch Settings .........................................................4-8

Upgrading the Firmware.................................................4-9

Basic Switching Function ............................................. 4-11

Auto MDI/MDI-X Connection............................4-11

Fiber Ports...........................................................4-11

Dual Speed Functionality and Switching.........4-12

Switching, Filtering, and Forwarding...............4-12

Switching andAddress Learning......................4-13

Auto-Negotiation and Speed Sensing.............4-13

Appendix A Product Specifications................................... A-1

Chapter 1Introduction

Welcome to Moxa EDS-405 Series, the new generation of EtherDevice™ Switch

that comes with “Moxa Turbo Ring,” developed by Moxa for industrial Ethernet

switches. With this plug-n-play ring redundancy solution, your industrial

automation and control applications can operate non-stop.

The following topics are covered in this chapter:

Overview

Package Checklist

Product Features

Panel Layout of EDS-405

Panel Layout of EDS-405-MM/SS-SC

Panel Layout of EDS-405-MM-ST

EDS-405 User’s Manual

Overview

EDS-405 Series, the new generation of EtherDevice™ Switch, includes 4 models:

EDS-405, EDS-405-MM-SC, EDS-405-SS-SC, and EDS-405-MM-ST, referred

to collectively as EDS-405. EDS-405 is a 5-port Ethernet switch specially

designed for industrial automation and control systems. It comes with the

plug-n-play Moxa Turbo Ring, which is used to establish an Ethernet redundant

ring topology. Turbo Ring can begin transmitting automatically over a redundant

path in under 300 ms, increasing the reliability of your system.

The built-in relay output function helps you monitor each port’s link status, each

power input’s status, and the health of the Turbo Ring topology. This relay output

warning function enables your maintenance engineers to react promptly to

emergency situations.

Commercial Ethernet switches need 3 to 5 minutes to recover the connection

when you unplug your device from one port, and then plug it into another port

for field diagnosis. The Line-Swap Fast Recovery feature responds in less than 1

second, allowing you to complete your diagnosis in a much shorter time period.

EDS-405 has a wide operating temperature range of -40 to 75°C, and is designed

to withstand a high degree of vibration and shock. The rugged hardware design

makes EDS-405 perfect for ensuring that your Ethernet equipment can withstand

critical industrial applications, such as in hazardous locations (UL/cUL Class 1

Division 2 and ATEX Class 1 Zone 2), and complies with FCC, TÜV, UL, and

CE Standards.

The redundant dual DC power inputs give you extra assurance that your switch

will operate non-stop, and the versatile installation options—by DIN-Rail or wall

mounting—makes it easy to fit EDS-405 into any environment.

1-2

Introduction

Package Checklist

Moxa EDS-405 is shipped with the following items:

Standard Accessories

y1 Switch: EDS-405, EDS-405-MM-SC, EDS-405-SS-SC, or

EDS-405-MM-ST

yEDS-405 User’s Manual

yProduct Warranty Booklet

yProtective caps for unused ports

Optional Accessories

yWK-46 Wall Mounting Kit

NOTE: Notify your sales representative if any of the above items is missing or

damaged.

Product Features

EDS-405 has the following features:

yPlug-n-play, ring redundancy solution (recovery time < 300 ms)

yRelay output alarm for power failure, port break, or Turbo Ring break.

y10/100M, full/half-duplex, MDI/MDI-X auto-sensing for 100BaseT(X) port

yRedundant dual DC power inputs

yLine-Swap Fast Recovery (patent pending)

yDIN-Rail or optional wall mounting

yOperating temperature ranges from 0 to 60°C, or extended operating

temperature from -40 to 75°C for “-T” models

1-3

EDS-405 User’s Manual

Panel Layout of EDS-405

1. Grounding screw

2. Terminal block for power input

PWR1/PWR2 and relay output

3. Heat dissipation orifices

4. Dip switches

5. Power input PWR1 LED

6. Power input PWR2 LED

7. Fault LED

8. Ring Master LED

9. TP port’s 100 Mbps LED

10. TP port’s 10 Mbps LED

11. Model Name

12. 10/100BaseT(X) Port

13. Screw hole for optional wall mounting kit

14. DIN-Rail kit

EDS-405

10M

100M

PWR1

PWR2

FAULT

RING

MASTER

V1 V2 INPUTS

12-48 VDC

PWR2

V2+

V2-

V1-

V1+

123456

ON DIP

FAULT

PWR1

PORT

ALARM

RING

MASTER

ONOFF

Top View

Front View

Rear View

1-4

Introduction

Panel Layout of EDS-405-MM/SS-SC

V1 V2 INPUTS

12-48 VDC

PWR2

V2+

V2-

V1-

V1+

123456

ON DIP

FAULT

PWR1

PORT

ALARM

RING

MASTER

ONOFF

Top View

Front View

Rear View

EDS-405-MM-SC

PWR1

PWR2

FAULT

10M

100M

RING

MASTER

NOTE: The appearance of

EDS-405-SS-SC is identical to

EDS-405-MM-SC.

1. Grounding screw

2. Terminal block for power input

PWR1/PWR2 and relay output

3. Heat dissipation orifices

4. Dip switches

5. Power input PWR1 LED

6. Power input PWR2 LED

7. Fault LED

8. Ring Master LED

9. TP port’s 100 Mbps LED

10. TP port’s 10 Mbps LED

11. Model Name

12. 100BaseFX Port (Single/Multi Mode)

13. FX port’s 100 Mbps LED

14. Screw hole for optional wall mounting kit

15. DIN-Rail kit

1-5

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Moxa Technologies Routeur réseau

Moxa Technologies

Moxa Technologies ioLogik E1242 Manuel utilisateur

Moxa Technologies

Moxa Technologies OnCell 5004 Series Manuel utilisateur

Moxa Technologies

Moxa Technologies EDR-8010 Series Manuel utilisateur

Moxa Technologies

Moxa Technologies ToughNet TN-5516 Series Manuel

Moxa Technologies

Moxa Technologies SDS-3008 Series Manuel utilisateur

Moxa Technologies

Moxa Technologies NAT-102 Series Manuel utilisateur

Moxa Technologies

Moxa Technologies EtherDevice EDR-G902 Manuel

Moxa Technologies

Moxa Technologies EDS-G308 Manuel

Moxa Technologies

Moxa Technologies NSwitch Manuel utilisateur

Moxa Technologies

Moxa Technologies EtherDevice EDS-P506A-4PoE Series Manuel

Moxa Technologies

Moxa Technologies PowerTrans PT-7728 Manuel

Moxa Technologies

Moxa Technologies ToughNet Manuel utilisateur

Moxa Technologies

Moxa Technologies NPort IA5150 series Manuel utilisateur

Moxa Technologies

Moxa Technologies SR3000 Manuel utilisateur

Moxa Technologies

Moxa Technologies OnCell 5004 Series Manuel utilisateur

Moxa Technologies

Moxa Technologies EDS-210A-1GTX-1GSFP-4SFP Manuel utilisateur

Moxa Technologies

Moxa Technologies OnCell G4302-LTE4 Series Manuel utilisateur

Moxa Technologies

Moxa Technologies ToughNet TN-5308-4 Manuel

Moxa Technologies

Moxa Technologies SDS-3008 Series Manuel utilisateur

Moxa Technologies

Moxa Technologies ETHERDEVICE EDS-308 Manuel

Moxa Technologies

Moxa Technologies NPort 5000 Series Manuel utilisateur

Moxa Technologies

Moxa Technologies TN-5916 Series Manuel utilisateur

Moxa Technologies

Moxa Technologies E Series Manuel utilisateur

Moxa Technologies

Moxa Technologies EtherDevice EDR-G903 Manuel utilisateur

Manuels Routeur réseau populaires d'autres marques

Allnet

Allnet ALL0333AU Manuel utilisateur

HomeSeer

HomeSeer HT-SEL Manuel utilisateur

Sercomm

Sercomm Genesis OC3505D Manuel utilisateur

Billion

Billion BIPAC 5102 Series Manuel utilisateur

TP-Link

TP-Link TD-8817 Manuel utilisateur

Motorola

Motorola MR1900 Manuel utilisateur

Digi

Digi IX14 Manuel utilisateur

Cisco

Cisco NCS 540 Manuel

XAVi

XAVi X8821e Manuel utilisateur

BEC

BEC 6200WZL Manuel utilisateur

MikroTik

MikroTik hAP ac3 Series Manuel utilisateur

Korenix

Korenix JetNet 5428G Series Manuel utilisateur

NETGEAR

NETGEAR FS526T - Switch Manuel utilisateur

Korenix

Korenix JetNet 5710G Series Manuel utilisateur

Automated Logic

Automated Logic ZN551 Manuel du propriétaire

Cisco

Cisco ASR 1000 Series Manuel de l'opérateur

EnGenius

EnGenius ESR-9710 Manuel utilisateur

Cisco

Cisco 805 Series Instructions d'utilisation et de sécurité