Moxa Technologies MGate EIP3170 Manuel utilisateur

P/N: 1802031701014

*1802031701014*

MGate EIP3170/EIP3270

Quick Installation Guide

Version 5.0, November 2019

Technical Support Contact Information

www.moxa.com/support

Moxa Americas:

Toll

-free: 1-888-669-2872

Tel:

1-714-528-6777

Fax:

1-714-528-6778

Moxa China (Shanghai office):

Toll

-free: 800-820-5036

Tel:

+86-21-5258-9955

Fax:

+86-21-5258-5505

Moxa Europe:

Tel:

+49-89-3 70 03 99-0

Fax:

+49-89-3 70 03 99-99

Moxa Asia-Pacific:

Tel:

+886-2-8919-1230

Fax:

+886-2-8919-1231

Moxa India:

Tel:

+91-80-4172-9088

Fax:

+91-80-4132-1045

- 2 -

Overview

The MGate EIP3170 and EIP3270 are 1- and 2-port DF1-to-EtherNet/IP

gateways that provide protocol conversions for users who need to

connect Rockwell Automation PLCs to an EtherNet/IP network. The

MGate EIP3000 Series products support up to 8 EtherNet/IP clients and

8 EtherNet/IP servers simultaneously. Each client can send up to 16

requests at one time.

Package Checklist

Before installing the MGate EIP3170 or EIP3270, verify that the

package contains the following items:

•MGate EIP3170 or EIP3270 DF1 to EtherNet/IP gateway

•Quick installation guide (printed)

•Warranty card

Optional Accessories:

•DK-35A: DIN-rail mounting kit (35 mm)

•Mini DB9F-to-TB Adaptor: DB9 female to terminal block adapter

•DR-4524: 45W/2A DIN-rail 24 VDC power supply with universal 85

to 264 VAC input

•DR-75-24: 75W/3.2A DIN-rail 24 VDC power supply with universal

85 to 264 VAC input

•DR-120-24: 120W/5A DIN-rail 24 VDC power supply with 88 to

132 VAC/176 to 264 VAC input by switch

Please notify your sales representative if any of the above items is

missing or damaged.

Hardware Introduction

LED Indicators

Name

Color

Function

PWR1

Red

Power is being supplied to the power input

PWR2

Red

Power is being supplied to the power input

RDY

Red

Steady: Power is on and the unit is booting up

Blinking: IP conflict, DHCP or BOOTP server did

not respond properly, or a relay output

occurred

Green

Steady: Power is on and the unit is functioning

normally

Blinking: Unit is responding to Locate function

Off

Power is off or power error condition exists

Ethernet

Orange

10 Mbps Ethernet connection

Green

100 Mbps Ethernet connection

Off

Ethernet cable is disconnected or has a short

Orange

Serial port is receiving data

Green

Serial port is transmitting data

Off

Serial port is not transmitting or receiving data

(EIP3270

only)

Orange

Serial port is receiving data

Green

Serial port is transmitting data

Off

Serial port is not transmitting or receiving data

- 3 -

Reset Button

The reset button is used to load factory defaults. Use a pointed object

such as a straightened paper clip to hold the reset button down for five

seconds. Release the reset button when the Ready LED stops blinking.

Panel Layouts

The MGate EIP3170 has a male DB9 port and a terminal block for

connecting to serial devices. The MGate EIP3270 has two DB9

connectors for connecting to serial devices.

- 4 -

Hardware Installation Procedure

STEP 1:

Use a standard straight

-through Ethernet cable to connect

the unit to a network hub or switch.

STEP 2:

Connect your device to the unit’s serial port.

STEP 3:

Mount the unit on a DIN-rail.

STEP 4:

Connect the power source to power input.

Wall or Cabinet Mounting

Mounting the MGate EIP3170/3270 on to a wall

requires two screws. The heads of the screws

should be 5 to 7 mm in diameter, the shafts

should be 3 to 4 mm in diameter, and the length

of the screws should be more than 10.5

mm.

NOTE

Wall mounting is certified for use in maritime applications.

Wallmount

DIN Rail

Software Installation Information

You can download the MGate Manager, User's Manual, and Device

Search Utility (DSU) from Moxa's website: www.moxa.com. Please refer

to the User’s Manual for additional details on using the MGate Manager

and DSU.

Default IP address: 192.168.127.254

Pin Assignments

Ethernet Port (RJ45)

Signal

Tx+

Tx-

Rx+

Rx-

- 5 -

Serial Port (Male DB9)

RS-232

DCD

RxD

TxD

DTR

GND

DSR

RTS

CTS

–

RS-422 (Terminal Block) Pinouts

RS-422

TxD+(B)

TxD-(A)

RxD+(B)

RxD-(A)

GND

Power Input and Relay Output Pinouts

V2+ V2-

V1+ V1-

Shielded

Ground

DC Power

Input 1

Power

Input 1

Relay

output

Relay

output

Power

Input 2

Power

Input 2

Environmental Specifications

Power Requirements

Power Input

12 to 48 VDC

Power Consumption

(Input Rating)

•EIP3170/EIP3170-T/EIP3270/EIP3270-T:

12 to 48 VDC, 435 mA (max.)

•EIP3270I: 12 to 48 VDC, 510 mA (max.)

•EIP3170I/EIP3170I-T:

12 to 48 VDC, 555 mA (max.)

Operating Temperature 0 to 60°C (32 to 140°F),

-40 to 75°C (-40 to 167°F) for –T model

Storage Temperature

-40 to 85°C (-40 to 185°F)

Operating Humidity

5 to 95% RH

Magnetic Isolation

Protection (Serial)

2 kV (for “I” models)

Dimensions

Without ears:

With ears extended:

29 x 89.2 x 118.5 mm (1.14 x 3.51 x 4.67

in)

29 x 89.2 x 124.5 mm (1.14 x 3.51 x 4.90

in)

Relay Output 1 digital relay output to alarm (normal

close): current-carrying capacity 1 A @ 30

VDC

Hazardous Location

UL/cUL Class 1 Division 2 Group A/B/C/D,

ATEX Zone 2, IECEx

- 6 -

This device complies with Part 15 of the FCC rules.

Operation is subject to the following conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including

interference that may cause undesired operation.

ATEX and IECEx Information

EIP3170/ EIP3270 Serial

1. Certificate number: DEMKO 18 ATEX 2168X

2. IECEx number: IECEx UL 18.0149X

3. Certification string: Ex nA IIC T4 Gc

Ambient Range : 0°C ≤Tamb ≤60°C (For suffix without -T)

Ambient Range : -40°C ≤Tamb ≤75°C (For suffix with -T)

4. Standards covered:

ATEX: EN 60079-0:2012+A11:2013, EN 60079-15:2010

IECEx: IEC 60079-0 Ed.6; IEC 60079-15 Ed.4

5. The conditions of safe usage:

•The equipment shall only be used in an area of at least

pollution degree 2, as defined in IEC/EN 60664-1.

•The equipment shall be installed in an enclosure that provides

a minimum ingress protection of IP4 in accordance with

IEC/EN 60079-0.

•Conductors suitable for Rated Cable Temperature ≥ 100°C

•Input conductor with 28-12 AWG (max. 3.3 mm2) to be used

with the devices

EIP3170I/ EIP3270I Serial

1. ATEX Certificate number: DEMKO 19 ATEX 2232X

2. IECEx number: IECEx UL 19.0058X

3. Certification string: Ex nA IIC T4 Gc

Ambient Range : 0°C ≤ Tamb ≤60°C (For suffix without -T)

Ambient Range : -40°C ≤ Tamb ≤75°C (For suffix with -T)

4. Standards covered:

ATEX: EN 60079-0:2012+A11:2013, EN 60079-15:2010

IECEx: IEC 60079-0 Ed.6; IEC 60079-15 Ed.4

5. The conditions of safe usage:

•The equipment shall only be used in an area of at least

pollution degree 2, as defined in IEC/EN 60664-1.

•The equipment shall be installed in an enclosure that provides

a minimum ingress protection of IP 54 in accordance with

IEC/EN 60079-0.

•Conductors suitable for Rated Cable Temperature ≥ 100°C

•Input conductor with 28-12 AWG (max. 3.3 mm2) to be used

with the devices

Address of manufacturer: Fl. 4, No. 135, Lane 235, Baoqiao Rd.

Xindian Diist., New Taipei City, 23145, Taiwan, R.O.C.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Moxa Technologies Porte

Moxa Technologies

Moxa Technologies AIG-100 Series Manuel utilisateur

Moxa Technologies

Moxa Technologies MGate MB3480 Manuel utilisateur

Moxa Technologies

Moxa Technologies MGate MB3280 Manuel utilisateur

Moxa Technologies

Moxa Technologies MGate 5105-MB-EIP-T Manuel utilisateur

Moxa Technologies

Moxa Technologies MGate 4101-MB-PBS Manuel utilisateur

Moxa Technologies

Moxa Technologies MGate W5208 series Manuel utilisateur

Moxa Technologies

Moxa Technologies MGate EIP3000 Manuel utilisateur

Moxa Technologies

Moxa Technologies MGate 5109 Manuel utilisateur

Moxa Technologies

Moxa Technologies OnCell G3150A-LTE Manuel utilisateur

Moxa Technologies

Moxa Technologies MGate MB3170 Manuel utilisateur

Moxa Technologies

Moxa Technologies MRC Manuel utilisateur

Moxa Technologies

Moxa Technologies OnCell G3111-HSPA series Manuel utilisateur

Moxa Technologies

Moxa Technologies MGate MB3000 Modbus Manuel utilisateur

Moxa Technologies

Moxa Technologies OnCell G3111-HSPA series Manuel utilisateur

Moxa Technologies

Moxa Technologies MGate 5111 Manuel utilisateur

Moxa Technologies

Moxa Technologies NPort Z3150 Manuel utilisateur

Moxa Technologies

Moxa Technologies MGate 5102-PBM-PN Manuel utilisateur

Moxa Technologies

Moxa Technologies MGate 5101-PBM-MN Manuel utilisateur

Moxa Technologies

Moxa Technologies MGate 5114 Manuel utilisateur

Moxa Technologies

Moxa Technologies NPort 5610 series Feuille d'instructions

Moxa Technologies

Moxa Technologies MGate 5103 Manuel utilisateur

Moxa Technologies

Moxa Technologies MGate 5105-MB-EIP Manuel utilisateur

Moxa Technologies

Moxa Technologies OnCell Series Manuel utilisateur

Moxa Technologies

Moxa Technologies MGate-4101-MB-PBS Manuel utilisateur

Manuels Porte populaires d'autres marques

LST

LST M500RFE-AS Manuel utilisateur

Kinnex

Kinnex Media Gateway Manuel utilisateur

2N Telekomunikace

2N Telekomunikace 2N StarGate Manuel utilisateur

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Manuel utilisateur

Telsey

Telsey CPVA 500 - SIP Manuel utilisateur

RTA

RTA 460A-NNA4 Fiche technique

Shaw

Shaw Gateway HDPVR Manuel utilisateur

ABB

ABB VSN900 Guide de démarrage rapide

Commander

Commander Pulse Manuel utilisateur

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Manuel utilisateur

NETGEAR

NETGEAR C6300BD Manuel utilisateur

Amit

Amit CDW531AM Manuel utilisateur

HMS

HMS Netbiter EasyConnect EC150 Manuel utilisateur

Huawei

Huawei EchoLife HG620 Manuel utilisateur

AT&T

AT&T U-verse 3801 Manuel d'utilisation et d'entretien

Logic IO

Logic IO RTCU MX2 turbo Manuel utilisateur

Suttle

Suttle MediaMAX MXM-521 Manuel utilisateur