Moxa Technologies NE-4100 Series Manuel utilisateur

NE-4100 Series User’s Manual

Ninth Edition, June 2008

www.moxa.com/product

Reproduction without permission is prohibited.

RSPSupply - 1-888-532-2706 - www.RSPSupply.com

http://www.RSPSupply.com/p-9766-Moxa-NE-4120A.aspx

NE-4100 Series User’s Manual

The software described in this manual is furnished under a license agreement and may be used only in

accordance with the terms of that agreement.

Reproduction without permission is prohibited.

Trademarks

MOXA is a registered trademark of Moxa Inc.

All other trademarks or registered marks in this manual belong to their respective manufacturers.

Disclaimer

Information in this document is subject to change without notice and does not represent a commitment on the

part of Moxa.

Moxa provides this document “as is,” without warranty of any kind, either expressed or implied, including, but

not limited to, its particular purpose. Moxa reserves the right to make improvements and/or changes to this

manual, or to the products and/or the programs described in this manual, at any time.

Information provided in this manual is intended to be accurate and reliable. However, Moxa assumes no

responsibility for its use, or for any infringements on the rights of third parties that may result from its use.

This product might include unintentional technical or typographical errors. Changes are periodically made to the

information herein to correct such errors, and these changes are incorporated into new editions of the

publication.

Technical Support Contact Information

www.moxa.com/support

Moxa Americas:

Toll-free: 1-888-669-2872

Tel: +1-714-528-6777

Fax: +1-714-528-6778

Moxa China (Shanghai office):

Toll-free: 800-820-5036

Tel: +86-21-5258-9955

Fax: +86-10-6872-3958

Moxa Europe:

Tel: +49-89-3 70 03 99-0

Fax: +49-89-3 70 03 99-99

Moxa Asia-Pacific:

Tel: +886-2-8919-1230

Fax: +886-2-8919-1231

RSPSupply - 1-888-532-2706 - www.RSPSupply.com

http://www.RSPSupply.com/p-9766-Moxa-NE-4120A.aspx

Table of Contents

Chapter 1 Introduction..............................................................................................1-1

Overview............................................................................................................................ 1-2

Package Checklist .............................................................................................................. 1-2

Product Features................................................................................................................. 1-2

Product Specifications........................................................................................................ 1-3

Chapter 2 Panel Layout and Pin Assignments.......................................................2-1

NE-4100T, NE-4100-ST .................................................................................................... 2-2

Panel Layout ........................................................................................................... 2-2

NE-4100-ST LED Indicators .................................................................................. 2-2

Pin Assignments...................................................................................................... 2-3

Block Diagrams ...................................................................................................... 2-4

NE-4110S, NE-4110A, NE-4110-ST ................................................................................. 2-5

Panel Layout ........................................................................................................... 2-5

NE-4110-ST LED Indicators .................................................................................. 2-6

Pin Assignments...................................................................................................... 2-6

Block Diagrams ...................................................................................................... 2-8

NE-4120S, NE-4120A, NE-4120-ST................................................................................. 2-9

Panel Layout ........................................................................................................... 2-9

NE-4120-ST LED Indicators ................................................................................ 2-10

Pin Assignments.................................................................................................... 2-11

Block Diagrams .................................................................................................... 2-12

Chapter 3 Getting Started.........................................................................................3-1

Wiring Precautions............................................................................................................. 3-2

Installing the NE-4100T onto the NE-4100-ST.................................................................. 3-3

Installing the NE-4110S, NE-4110A onto the NE-4110-ST............................................... 3-3

Installing the NE-4120S, NE-4120A onto the NE-4120-ST .............................................. 3-4

Selecting the Serial Interface.............................................................................................. 3-4

Circuit Pad for External Connection .................................................................................. 3-5

Connecting the Power ........................................................................................................ 3-5

Connecting to the Network................................................................................................. 3-6

Connecting to a Serial Device............................................................................................ 3-6

Digital I/O Channel Settings .............................................................................................. 3-6

Digital Output LED Circuit Design ........................................................................ 3-8

Chapter 4 Choosing the Proper Operation Mode...................................................4-1

Overview............................................................................................................................ 4-2

TCP Server Mode............................................................................................................... 4-2

TCP Client Mode................................................................................................................ 4-3

UDP Mode.......................................................................................................................... 4-3

Real COM Mode................................................................................................................ 4-4

Chapter 5 Initial IP Address Configuration.............................................................5-1

Static vs. Dynamic IPAddress ........................................................................................... 5-2

Factory Default IPAddress ................................................................................................ 5-2

NE-4100 Series Administration Suite ................................................................................ 5-2

ARP.................................................................................................................................... 5-2

Telnet Console.................................................................................................................... 5-3

RSPSupply - 1-888-532-2706 - www.RSPSupply.com

http://www.RSPSupply.com/p-9766-Moxa-NE-4120A.aspx

Serial Console (19200, n, 8, 1)........................................................................................... 5-6

Chapter 6 Web Console Configuration ...................................................................6-1

Opening Your Browser....................................................................................................... 6-2

Web Console Navigation.................................................................................................... 6-3

Basic Settings..................................................................................................................... 6-3

Network Settings................................................................................................................6-5

Serial Settings..................................................................................................................... 6-8

Operating Settings..............................................................................................................6-9

TCP Server Mode ................................................................................................... 6-9

Real COM Mode................................................................................................... 6-12

TCP Client Mode.................................................................................................. 6-14

UDP Mode............................................................................................................ 6-17

Accessible IP Settings ...................................................................................................... 6-19

Auto Warning Settings ..................................................................................................... 6-20

E-mail and SNMP Trap......................................................................................... 6-20

Event Type............................................................................................................ 6-21

Digital IO ......................................................................................................................... 6-22

DIO Settings.......................................................................................................... 6-22

DIO Monitor ......................................................................................................... 6-23

Serial Command Mode..................................................................................................... 6-23

Change Password ............................................................................................................. 6-23

Load Factory Defaults...................................................................................................... 6-24

Save/Restart...................................................................................................................... 6-24

Chapter 7 Network Enabler Administrator..............................................................7-1

Overview............................................................................................................................ 7-2

Installing Network Enabler Administrator ......................................................................... 7-2

Network Enabler Administrator Navigation....................................................................... 7-4

Configuration Functions..................................................................................................... 7-5

Broadcast Search..................................................................................................... 7-5

Specify by IP Address............................................................................................. 7-6

Locate...................................................................................................................... 7-6

Unlock..................................................................................................................... 7-7

Configure ................................................................................................................ 7-8

Upgrade Firmware ................................................................................................ 7-10

Import and Export Configuration.......................................................................... 7-11

Monitor Functions............................................................................................................ 7-12

Add and Remove Target....................................................................................... 7-12

Load Configured COM Port.................................................................................. 7-13

Settings.................................................................................................................. 7-13

Go and Stop........................................................................................................... 7-15

Port Monitor Functions .................................................................................................... 7-16

COM Mapping Functions................................................................................................. 7-17

Add and Remove Target....................................................................................... 7-17

COM Settings........................................................................................................ 7-17

Enable and Disable................................................................................................ 7-19

Apply and Discard Change ................................................................................... 7-20

Import and Export COM Mapping........................................................................ 7-20

IPAddress Report Functions............................................................................................ 7-20

Chapter 8 Linux and UNIX Configuration ...............................................................8-1

RSPSupply - 1-888-532-2706 - www.RSPSupply.com

http://www.RSPSupply.com/p-9766-Moxa-NE-4120A.aspx

Linux Real TTY Drivers .................................................................................................... 8-2

Basic Procedures..................................................................................................... 8-2

Hardware Setup....................................................................................................... 8-2

Installing Linux Real TTY Driver Files.................................................................. 8-2

Mapping TTY Ports................................................................................................ 8-3

Removing Mapped TTY Ports................................................................................ 8-3

Removing Linux Driver Files ................................................................................. 8-4

UNIX Fixed TTY Driver.................................................................................................... 8-4

Installing the UNIX Driver ..................................................................................... 8-4

Configuring the UNIX Driver................................................................................. 8-5

Chapter 9 Serial Command Mode............................................................................9-1

Overview............................................................................................................................ 9-2

Serial Command Format and Command Set...................................................................... 9-2

Command Structure ................................................................................................ 9-2

Reply Structure ....................................................................................................... 9-3

OP Codes and Parameters....................................................................................... 9-3

Operation Flow Chart......................................................................................................... 9-8

Configuring Trigger Type...................................................................................................9-9

Network Enabler Administrator.............................................................................. 9-9

Telnet Console...................................................................................................... 9-11

Web Console......................................................................................................... 9-12

Serial Console....................................................................................................... 9-12

Entering Serial Command Mode...................................................................................... 9-13

Trigger Type ......................................................................................................... 9-13

Serial Port Parameters........................................................................................... 9-13

Comments............................................................................................................. 9-14

Exiting Serial Command Mode........................................................................................ 9-14

Determining the Active Mode.......................................................................................... 9-14

Serial Command Examples.............................................................................................. 9-15

Example 1: Get Model Name Using HW Trigger................................................. 9-16

Example 2: Change IP Address Using HW Trigger.............................................. 9-16

Example 3: Get IP Mode Using SW Trigger ........................................................ 9-16

Example 4: Change TCP Port Number Using SW Trigger................................... 9-17

Appendix A Well Known Port Numbers .................................................................... A-1

Appendix B NECI Library............................................................................................ B-1

Appendix C Auto IP Report Protocol......................................................................... C-1

IPAddress Report Structure...............................................................................................C-2

Hardware and AP ID ..........................................................................................................C-2

Example..............................................................................................................................C-2

Appendix D DIO Commands....................................................................................... D-1

Overview........................................................................................................................... D-1

C Code Example .................................................................................................... D-2

Read Single DIO ............................................................................................................... D-2

Command............................................................................................................... D-2

Response................................................................................................................ D-2

C Code Example .................................................................................................... D-3

Write Single DIO............................................................................................................... D-3

Command............................................................................................................... D-3

RSPSupply - 1-888-532-2706 - www.RSPSupply.com

http://www.RSPSupply.com/p-9766-Moxa-NE-4120A.aspx

Response................................................................................................................ D-3

C Code Example:................................................................................................... D-4

Read Multiple DIO............................................................................................................ D-4

Command............................................................................................................... D-4

Response................................................................................................................ D-4

C Code Example:................................................................................................... D-5

Write Multiple DIO........................................................................................................... D-5

Command............................................................................................................... D-5

Response................................................................................................................ D-6

C Code Example:................................................................................................... D-7

Appendix E SNMP Agent with MIB II & RS-232 Like Group .................................... E-1

RSPSupply - 1-888-532-2706 - www.RSPSupply.com

http://www.RSPSupply.com/p-9766-Moxa-NE-4120A.aspx

Chapter 1 Introduction

The NE-4100 Series embedded device server is a line of compact modules that act as network

enablers. NE-4100 Series modules can be installed in or on a serial device to connect it to an

Ethernet network, allowing you to gain network access to any electronic device that has a serial

port. All NE-4100 Series modules come equipped with built-in TCP/IP protocols for fast

integration, saving you time and energy on programming.

The following topics are covered in this chapter:

Overview

Package Checklist

Product Features

Product Specifications

RSPSupply - 1-888-532-2706 - www.RSPSupply.com

http://www.RSPSupply.com/p-9766-Moxa-NE-4120A.aspx

NE-4100 Series User’s Manual Introduction

1-2

Overview

NE-4100 Series modules are a type of embedded device server or network enabler. An NE-4100

Series module may be installed in or attached to a serial device to make it accessible from a

network. There are three types of module offered: drop-in (NE-4100T), RJ45 (NE-4110S,

NE-4110A), and pin header (NE-4120S, NE-4120A). The last letter of the model number indicates

the serial signal supported by the module. T indicates a TTL connector, S indicates an RS-232

connector, and A indicates an RS-422/485 connector. Each module includes 4 digital input/output

channels, also known as DIO channels or GPIO channels.

NE-4100 Series modules are very compact—less than half the size of a credit card. At such a small

size, they can be installed into almost any serial device. Each NE-4100 Series module also comes

with a built-in TCP/IP stack for fast integration. Engineers can spend less time on TCP/IP

programming, and focus more on developing other major features, thereby shortening your

product’s time to market. Modules may be easily configured with a user-friendly Windows utility,

web browser, serial console, or Telnet console. In addition, a Windows-based NECI (Network

Enabler Configuration Interface) library is available to help you develop your own Windows

utilities.

Each module comes with a complete development kit containing an evaluation board, documents,

sample code, cables, and accessories.

Package Checklist

y1 NE-4100 Series module

y1 NE-4100-ST (the evaluation board )

yNE-4100 Series documentation & software CD

y1 universal power adaptor

y2 power cords

y1 null modem cable

y1 cross-over Ethernet cable

yWarranty statement

yQuick Installation Guide

NOTE: Please notify your sales representative if any of the above items is missing or damaged.

Product Features

All NE-4100 Series modules have the following features:

y10/100 Mbps auto-sensing Ethernet interface

yCompact size and ready-to-go design (NE-4100T measures 45 × 36 mm, NE-4110/4120

measure 57 × 40 mm)

yBuilt-in TCP/IP firmware for fast integration

yTCP Server, TCP Client, UDP, Real COM driver operation modes

yLow power consumption (1.5W)

yMultiple user-friendly configuration options

y4 dedicated digital input/output (DIO) channels for user applications

ySoftware reset

RSPSupply - 1-888-532-2706 - www.RSPSupply.com

http://www.RSPSupply.com/p-9766-Moxa-NE-4120A.aspx

NE-4100 Series User’s Manual Introduction

1-3

Product Specifications

NE-4100T NE-4110S, NE-4110A NE-4120S, NE-4120A

System

CPU 16-bit MCU

RAM 1 MB

Flash 2 MB

LAN

Ethernet 10/100 Mbps,

pin headers 10/100 Mbps,

RJ45 10/100 Mbps,

pin headers

Protection built-in transformer with 1.5 KV magnetic isolation

Serial

Interface TTL

RS-232 (NE-4110S)

RS-422/485 (NE-4110A) RS-232 (NE-4120S)

RS-422/485 (NE-4120A)

Port Type pin header RJ45 pin header

Signals

TTL

RS-232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND

RS-422: TxD+, TxD-, RxD+, RxD-, GND

RS-485 (2-wire): Data+, Data-, GND

RS-485 (4-wire): TxD+, TxD-, RxD+, RxD-, GND

Serial Communication Parameters

Parity None, Even, Odd, Space, Mark

Data Bits 5, 6, 7, 8

Stop Bit 1, 1.5, 2

Flow Control RTS/CTS, XON/XOFF

Transmission Speed 50 bps to 115.2 Kbps for PCB V1.x,

110 bps to 230.4 Kbps for PCB V2.x

Software Features

Protocols ICMP, ARP, IP, TCP, UDP, DHCP, HTTP, SNMP, SMTP

Operating Mode TCP Server, TCP Client, UDP, Real COM mode

Utilities NE utility for Windows 95/98/ME/NT/2000/XP/2003(x64)/XP(x64)

Configuration web browser, serial console, Telnet console, or Windows utility

Power Requirements

Power Input 5 VDC

Power Consumption 290 mA @ 5 VDC (Max.)

Environmental

Operating Temperature 0°C to 70°C (32°F to 158°F), 5% to 95% RH

Storage Temperature -20°C to 85°C (-4°F to 185°F), 5% to 95% RH

Regulatory Approvals

EMC FCC Class A, CE Class A

Warranty 5 years

RSPSupply - 1-888-532-2706 - www.RSPSupply.com

http://www.RSPSupply.com/p-9766-Moxa-NE-4120A.aspx

Chapter 2 Panel Layout and Pin Assignments

This chapter includes information about the panel layouts and pin assignments for NE-4100 Series

modules. The layouts and reference circuit diagrams for the evaluation boards are also covered.

The evaluation boards are used for evaluation and development of applications for NE-4100 Series

modules.

The following topics are covered in this chapter:

NE-4100T, NE-4100-ST

¾Panel Layout

¾NE-4100-ST LED Indicators

¾Pin Assignments

¾Block Diagrams

NE-4110S, NE-4110A, NE-4110-ST

¾Panel Layout

¾NE-4110-ST LED Indicators

¾Pin Assignments

¾Block Diagrams

NE-4120S, NE-4120A, NE-4120-ST

¾Panel Layout

¾NE-4120-ST LED Indicators

¾Pin Assignments

¾Block Diagrams

RSPSupply - 1-888-532-2706 - www.RSPSupply.com

http://www.RSPSupply.com/p-9766-Moxa-NE-4120A.aspx

Autres manuels pour NE-4100 Series

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Moxa Technologies Unité de contrôle

Moxa Technologies

Moxa Technologies V2400 Series Manuel utilisateur

Moxa Technologies

Moxa Technologies CA Series Manuel utilisateur

Moxa Technologies

Moxa Technologies PT-G503-PHR-PTP-HV Manuel utilisateur

Moxa Technologies

Moxa Technologies WAPN001 Manuel utilisateur

Moxa Technologies

Moxa Technologies TCC-100 Series Manuel utilisateur

Moxa Technologies

Moxa Technologies MiiNePort E1 Series Manuel utilisateur

Moxa Technologies

Moxa Technologies MiiNePort W1 Series Manuel utilisateur

Moxa Technologies

Moxa Technologies MiiNePort W1 Series Manuel utilisateur

Moxa Technologies

Moxa Technologies NPort Z2150 Manuel utilisateur

Moxa Technologies

Moxa Technologies PWR-190-AC/DC Manuel utilisateur

Moxa Technologies

Moxa Technologies WE-2100T Series Manuel utilisateur

Moxa Technologies

Moxa Technologies EOM-104 Series Manuel utilisateur

Moxa Technologies

Moxa Technologies WAPN008 Manuel utilisateur

Moxa Technologies

Moxa Technologies CA Series Manuel utilisateur

Moxa Technologies

Moxa Technologies DA-IRIGB-4DIO-PCI104-EMC4 Manuel utilisateur

Moxa Technologies

Moxa Technologies ioLogik E1261W-T Manuel utilisateur

Moxa Technologies

Moxa Technologies Industio CI-134 Series Manuel utilisateur

Moxa Technologies

Moxa Technologies MiiNePort E2-H Manuel utilisateur

Moxa Technologies

Moxa Technologies MiiNePort W1 Series Manuel utilisateur

Moxa Technologies

Moxa Technologies CA-134I Manuel utilisateur

Moxa Technologies

Moxa Technologies WAPN005 Manuel utilisateur

Moxa Technologies

Moxa Technologies CB-108 Manuel utilisateur

Moxa Technologies

Moxa Technologies CA-132 series Manuel utilisateur

Moxa Technologies

Moxa Technologies WFS001 Manuel utilisateur

Manuels Unité de contrôle populaires d'autres marques

Festo

Festo Compact Performance CP-FB6-E Manuel de la liste des pièces

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur

JS Automation

JS Automation MPC3034A Manuel utilisateur

JAUDT

JAUDT SW GII 6406 Series Guide rapide

Spektrum

Spektrum Air Module System Manuel utilisateur

BOC Edwards

BOC Edwards Q Series Manuel utilisateur

KHADAS

KHADAS BT Magic Manuel utilisateur

Etherma

Etherma eNEXHO-IL Manuel utilisateur

PMFoundations

PMFoundations Attenuverter Manuel utilisateur

GEA

GEA VARIVENT Manuel utilisateur

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuel utilisateur

Altronix

Altronix LINQ8PD Instructions de montage

Eaton

Eaton Powerware Series Manuel utilisateur

WAGO

WAGO 750-407/040-000 Manuel utilisateur

Sony

Sony CCU-590 Manuel utilisateur

Graco

Graco 25D614 Manuel utilisateur

Task Force Tips

Task Force Tips YE-RF-900 Manuel de programmation

Shini

Shini SPV-U Series Manuel utilisateur