Moxa Technologies MAR-2000 Instructions d'utilisation

MAR-2000 Hardware User’s Manual

Edition 2.0, February 2017

www.moxa.com/product

MAR-2000 Hardware User’s Manual

The software described in this manual is furnished under a license agreement and may be used only in accordance with

the terms of that agreement.

Trademarks

The MOXA logo is a registered trademark of Moxa Inc.

All other trademarks or registered marks in this manual belong to their respective manufacturers.

Disclaimer

Information in this document is subject to change without notice and does not represent a commitment on the part of

Moxa.

Moxa provides this document as is, without warranty of any kind, either expressed or implied, including, but not limited

to, its particular purpose. Moxa reserves the right to make improvements and/or changes to this manual, or to the

products and/or the programs described in this manual, at any time.

Information provided in this manual is intended to be accurate and reliable. However, Moxa assumes no responsibility for

its use, or for any infringements on the rights of third parties that may result from its use.

This product might include unintentional technical or typographical errors. Changes are periodically made to the

information herein to correct such errors, and these changes are incorporated into new editions of the publication.

Technical Support Contact Information

www.moxa.com/support

Moxa Americas

Toll

-free: 1-888-669-2872

Tel:

+1-714-528-6777

Fax:

+1-714-528-6778

Moxa China (Shanghai office)

Toll

-free: 800-820-5036

Tel:

+86-21-5258-9955

Fax:

+86-21-5258-5505

Moxa Europe

Tel:

+49-89-3 70 03 99-0

Fax:

+49-89-3 70 03 99-99

Moxa Asia

-Pacific

Tel:

+886-2-8919-1230

Fax:

+886-2-8919-1231

Moxa India

Tel:

+91-80-4172-9088

Fax:

+91-80-4132-1045

Table of Contents

1. Introduction...................................................................................................................................... 1-1

Overview...........................................................................................................................................1-2

Package Checklist...............................................................................................................................1-2

Product Features ................................................................................................................................1-2

Product Hardware Specifications...........................................................................................................1-3

2. Appearance and Dimensions ............................................................................................................. 2-1

Appearance........................................................................................................................................2-2

Dimensions........................................................................................................................................2-3

Hardware Block Diagram .....................................................................................................................2-4

LED Indicators....................................................................................................................................2-4

Reset Button......................................................................................................................................2-5

Real Time Clock..................................................................................................................................2-5

3. Mounting Options.............................................................................................................................. 3-1

Wall or Cabinet Mounting.....................................................................................................................3-2

DIN Rail Assembly ..............................................................................................................................3-2

4. Hardware Connection Description..................................................................................................... 4-1

Wiring Requirements...........................................................................................................................4-2

Connecting the Power .........................................................................................................................4-2

Grounding the MAR-2000 ....................................................................................................................4-3

Connecting to the Network...................................................................................................................4-3

Connecting a Serial Device...................................................................................................................4-3

Connecting to the Console Port.............................................................................................................4-4

CompactFlash ....................................................................................................................................4-5

SIM Card...........................................................................................................................................4-6

USB ..................................................................................................................................................4-6

Digital Inputs/Outputs.........................................................................................................................4-6

Digital Input Wiring .....................................................................................................................4-6

Digital Output Wiring ...................................................................................................................4-6

A. Regulatory Approval Statements....................................................................................................... A-1

1. Introduction

Thank you for purchasing the Moxa MAR-2000 programmable RISC-platform multi-WAN router.

The MAR-2000 is a multi-WAN router with 802.11n, GPS, and 3G GSM/HSPA+ interfaces. It features 2

RS-232/422/485 serial ports, 2 Ethernet ports, 4 digital input channels, 4 digital output channels, a

CompactFlash socket, and 2 USB 2.0 ports. The MAR-2000 is particularly well-suited for rolling stock or other

vehicle applications, giving a solid, convenient foundation for configuring an intelligent, cost-effective,

multiple-WAN mobile communications environment.

This manual introduces the hardware of the MAR-2000 multi-WAN router, with a focus on installing and

configuring the hardware.

The following topics are covered in this chapter:



Overview



Package Checklist



Product Features



Product Hardware Specifications

MAR-2000 Hardware Introduction

1-2

Overview

The MAR-2000 series is a compact programmable RISC-based wireless mobile router with strong wireless

routing capabilities. Featuring a built-in GPS module, HSPA+ cellular and 802.11 a/b/g/n wireless capabilities,

independent power switches on its cellular module connectors and high thermal tolerance, the MAR-2000 is

compliant with a portion of EN 50155 specifications. The built-in 32 MB NOR Flash ROM and 512 MB SDRAM

give you enough memory to your application software, and the 512 MB NAND Flash can be used to provide

additional data storage. The MAR-2000 also provides one CompactFlash socket for future storage expansion.

The built-in GPS module supports geo-fencing functionality, making it ideal for managing wireless connections

in cross-WAN environments, such as are found in rolling stock or other vehicle applications.

The MAR-2000 offers optimal data routing with the built-in dynamic routing feature. When a train travels to a

different region, it often faces different wireless interface switches, such as WiFi, UMTS and HSPA+. Through

multiple-WAN support and backup, the MAR-2000 helps ensure that your wireless connections are always

available.

The MAR-2000 series includes wide temperature models designed to operate reliably in extreme temperatures

ranging from -25 to 70°C.

The MAR-2000 provides an easy way to configure the routing between your various network interfaces.

Advantages of MAR-2000 include the following:

•Intelligent policy configuration: Users can easily automate system configuration for heterogeneous

networks.

•Multiple routing technology: Network bandwidth efficiency is easily optimized and network traffic jams

are easily avoided.

Package Checklist

All models of the MAR-2000 Series are shipped with the following items:

•1 MAR-2000 multi-WAN router

•Wallmount assembly

•DIN rail mount assembly

•CBL-4PINDB9F-100: 100 cm 4-pin-to-DB9 (female-to-female) console port cable, to connect to the

onboard 4-pin male RS-232 header connector

•Quick installation guide

•Documentation & software CD

•Warranty card

NOTE: Please notify your sales representative if any of the above items are missing or damaged.

Product Features

•Intel XScale IXP435 processor, 533 MHz

•512 MB DDR2 SDRAM

•512 MB NAND Flash for data storage

•32 MB NOR Flash to store OS

•Multi-WAN dynamic routing

•Policy-based routing management

•Simple web management user interface

•IEEE 802.11a/b/g/n wireless AP/bridge/client

•Five-band UMTS/HSPA+ and quad-band GSM/GPRS/EDGE industrial IP-modems

•Complies with a portion of EN 50155 specifications

•Built-in 50-channel GPS for location-based applications

•-25 to 70°C wide temperature range (EN 50155 Class T3)

MAR-2000 Hardware Introduction

1-3

Product Hardware Specifications

Computer

CPU:

Intel XScale IXP435, 533 MHz

OS (pre

-installed): Linux 3.8.13

DRAM:

512 MB DDR2 SDRAM onboard

Flash:

32 MB NOR Flash onboard to store

512 MB NAND Flash, up to 1 GB for OS file system, caching storage, and data logger

USB:

USB 2.0 hosts x 2

Storage

Storage Expansion:

CompactFlash (Type I/II) socket, up to 8 GB

Ethernet Interface

LAN:

2 auto-sensing 10/100 Mbps ports (M12)

agnetic Isolation Protection: 1.5 kV built in

GPS Module (U-Blox LEA-6S)

Receiver Types:

• 50

-channel U-blox 6 engine

• GPS L1 C/A code

• SBAS:WAAS, EGNOS, MSAS, GAGAN

Acquisition:

• Cold starts: 28 s

• Warm starts: 28 s

• Aided starts: 1 s

• Hot star

ts: 1 s

Sensitivity:

• Tracking:

-160 dBm

• Reacquisition:

-160 dBm

• Cold starts:

-147 dBm

Timing accuracy:

• RMS: 30 ns

• 99%: <60 ns

• Granularity: 21 ns

Accuracy:

• Position: 2.5 m CEP

• SBAS: 2.0m CEP

Protocols:

NMEA, UBX binary, max. update rate: 5Hz (ROM version )

Time Pulse:

0.25Hz to 1KHz

Velocity Accuracy:

0.1 m/s

Heading Accuracy:

0.5 degrees

-GPS: Supports AssistNow Online and AssistNow Offline, OMA SUPL compliant

Operational Limits:

Velocity:500m/s(972 knots)

Connector Type:

TNC

WLAN Module (Atheros AR9220)

WAPN001:

IEEE 802.11a/b/g/n wireless LAN module with TNC antenna connector

Standard:

IEEE 802.11a/b/g/n for wireless LAN

Connector Type:

QMA connector female type (MAR-2001-T x 2, MAR-2002-T x 4)

Mode:

Client/AP

MAR-2000 Hardware Introduction

1-4

Cellular Module (Cinterion PH8)

Frequency Bands:

GSM/GPRS/EDGE/UMTS/HSPA+

Band Options:

• Five band UMTS(WCDMA/FDD)

• 800/850/1900 AWS and 2100 MHz

• Quad

-band GSM: 850/900/1800/1900 MHz

HSDPA/HSUPA Data Rates:

DL: 3.6/7.2/14.4 Mbps; UL: 2.0/5.76 Mbps

UMTS Data

Rates:

DL: max 384 Kbps; UL: max 384 Kbps

EDGE Class 12:

DL: max 237 Kbps; UL: max 237 Kbps

GPRS Class 12:

DL: max 85.6 Kbps; UL: max 85.6 Kbps

Connector Type:

QMA connector female type (MAR-2001-T x 2, MAR-2002-T x 3)

Serial Interface

Serial Stand

ards: 2 RS-232/422/485 ports, software-selectable (DB9)

Console Port:

RS-232 (TxD, RxD, GND), 4-pin pin header output (115200, n, 8, 1)

Serial Signals

-232: TxD, RxD, DTR, DSR, RTS, CTS, DCD, GND

-422: TxD+, TxD-, RxD+, RxD-, GND

-485-4w: TxD+, TxD-, RxD+, RxD-, GND

-485-2w: Data+, Data-, GND

Serial Communication Parameters

Data Bits:

5, 6, 7, 8

Stop Bits:

1, 1.5, 2

Parity:

None, Even, Odd, Space, Mark

Flow Control:

RTS/CTS, XON/XOFF, ADDC® (automatic data direction control) for RS-485

Baudrate:

50 bps to 921.6 Kbps (supports non-standard baudrates; see user’s manual for details)

Digital Input

Input Channels:

4, source type

Input Voltage:

0 to 30 VDC

Digital Input Levels for Dry Contacts:

• Logic level 0: Close to GND

• Logic le

vel 1: Open

Digital Input Levels for Wet Contacts:

• Logic level 0: +3 V max.

• Logic level 1: +10 V to +30 V (COM to DI)

Connector Type:

10-pin screw terminal block (4 points, COM, GND)

Isolation:

2 KV optical isolation

Digital Output

Output Channe

ls: 4, sink type

Output Current:

Max. 200 mA per channel

-state Voltage: 24 VDC nominal, open collector to 30 V

Connector Type:

10-pin screw terminal block (4 points, GND)

LEDs

System:

Power, Ready, Storage, Programmable

LAN:

10M/Link x 2, 100M/Link x 2 (on connector)

Serial:

TxD x 2, RxD x 2

Reset Button:

Supports “Reset to Factory Default”

MAR-2000 Hardware Introduction

1-5

Physical Characteristics

Housing:

SECC sheet metal (1 mm)

Weight:

1.2 kg

Dimensions:

200 x 57 x 120 mm (7.87 x 2.24 x 4.72 in)

Mounting:

DIN rail, wall

Environmental Limits

Operating Temperature:

Standard Models:

-25 to 55°C (-13 to 131°F)

Wide Temp. Models:

-25 to 70°C (-13 to 158°F)

Storage Temperature:

Standard Models:

-25 to 75°C (-13 to 167°F)

Wide Temp. Models:

-40 to 80°C (-40 to 176°F)

bient Relative Humidity: 5 to 95% (non-condensing)

Anti

-vibration: IEC 61373 standard

Anti

-shock: IEC 61373 standard

Power Requirements

Input Voltage:

24 VDC (9 to 48 V), M12 connector

Power Consumption:

20 W

• 833 mA @ 24 VDC

Standards and Certifications

Safety:

UL 60950-1

EMC:

EN 55032 Class A, EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, FCC Part 15 Subpart B Class A

Rail Traffic:

EN 50155*, EN 50121-4, IEC 61373

*Complies with a portion of EN 50155 specifications. Please contact

Moxa or a Moxa distributor for details.

Reliability

Alert Tools:

Built-in buzzer and RTC (real-time clock)

Warranty

Warranty Period:

5 years (does not apply to cellular module)

Details:

See www.moxa.com/warranty

Note: These hardware specificatio

ns describe the embedded computer unit itself, but not its official

accessories. In particular, the wide temperature specification does not apply to accessories such as power

adaptors and cables.

2. Appearance and Dimensions

The following topics are covered in this chapter:



Appearance



Dimensions



Hardware Block Diagram



LED Indicators



Reset Button



Real Time Clock

MAR-2000 Hardware Appearance and Dimensions

2-2

Appearance

Front View

Top View

Rear View

NOTE

The Configuration Switch

, which is for turning on the power, is available by request

Autres manuels pour MAR-2000

Table des matières

Autres manuels Moxa Technologies Matériel informatique

Moxa Technologies

Moxa Technologies C168P Manuel utilisateur

Moxa Technologies

Moxa Technologies DA-661 Instructions d'utilisation

Moxa Technologies

Moxa Technologies CP-102E Manuel utilisateur

Moxa Technologies

Moxa Technologies UC-8410 Instructions d'utilisation

Moxa Technologies

Moxa Technologies MPC-2101 Series Manuel utilisateur

Moxa Technologies

Moxa Technologies V2201 Instructions d'utilisation

Moxa Technologies

Moxa Technologies Industrial Serial Board CI-132 Manuel utilisateur

Moxa Technologies

Moxa Technologies C104P Manuel utilisateur

Moxa Technologies

Moxa Technologies ABC-02-USB-T Manuel utilisateur

Moxa Technologies

Moxa Technologies ioLogik E2000 Series Manuel utilisateur

Moxa Technologies

Moxa Technologies RKP-A110 Series Manuel utilisateur

Moxa Technologies

Moxa Technologies CP-118U Series Manuel utilisateur

Moxa Technologies

Moxa Technologies ABC-02-USB Manuel utilisateur

Moxa Technologies

Moxa Technologies CP-602U-I-T Manuel utilisateur

Moxa Technologies

Moxa Technologies UC-7420-CE Manuel utilisateur

Moxa Technologies

Moxa Technologies EM-1220 LX Manuel utilisateur

Moxa Technologies

Moxa Technologies Moxa Smartio C168H Manuel utilisateur

Moxa Technologies

Moxa Technologies Smartio CP-104UL Manuel utilisateur

Moxa Technologies

Moxa Technologies CP-118EL Manuel utilisateur

Moxa Technologies

Moxa Technologies WAPN008-1 Manuel utilisateur

Moxa Technologies

Moxa Technologies MiiNePort E1-SDK Manuel utilisateur

Moxa Technologies

Moxa Technologies Industio C114HI Manuel utilisateur

Moxa Technologies

Moxa Technologies CP-602U-I Manuel utilisateur

Moxa Technologies

Moxa Technologies Industio CP-114 Series CP-114 Series Manuel utilisateur

Manuels Matériel informatique populaires d'autres marques

EMC2

EMC2 VNX Series Manuel du propriétaire

Panasonic

Panasonic DV0PM20105 Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuel utilisateur

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuel utilisateur

Raidon

Raidon iT2300 Manuel utilisateur

National Instruments

National Instruments PXI-8186 Manuel utilisateur

Hauppauge

Hauppauge WinTV-HVR-2250 Manuel utilisateur

Kontron

Kontron CP6002 Manuel utilisateur

Manhattan

Manhattan 702843 Manuel utilisateur

Aphex

Aphex 230 Manuel utilisateur

AMD

AMD Phenom II Manuel d'exploitation

Intel

Intel NUC 12 Pro Manuel utilisateur

dbx

dbx Zone Pro 1260 Manuel utilisateur

Galaxy

Galaxy GHDX2-2430S-24F4D Manuel utilisateur

Intel

Intel AXXRMFBU4 Manuel utilisateur

Kontron

Kontron DIMM-PC/MD Manuel utilisateur

ST X-NUCLEO-SAFEA1B Mode d'emploi

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuel utilisateur