Moxa Technologies CP-602U-I-T Manuel utilisateur

P/N: 1802006020012

*1802006020012*

CAN Interface Board

Quick Installation Guide

Edition 3.0, September 2016

Technical Support Contact Information

www.moxa.com/support

Moxa Americas:

Toll

-free: 1-888-669-2872

Tel:

1-714-528-6777

Fax:

1-714-528-6778

Moxa China (Shanghai office):

Toll

-free: 800-820-5036

Tel:

+86-21-5258-9955

Fax:

+86-21-5258-5505

Moxa Europe:

Tel:

+49-89-3 70 03 99-0

Fax:

+49-89-3 70 03 99-99

Moxa Asia-Pacific:

Tel:

+886-2-8919-1230

Fax:

+886-2-8919-1231

Moxa India:

Tel:

+91-80-4172-9088

Fax:

+91-80-4132-1045



- 2 -

Overview

Moxa’s new CAN (Controller Area Network) interface board solutions

include boards that support the Universal PCI interface, PCI Express

interface, and PC/104-Plus interface. As stand-alone CAN controllers, the

CP-602U-I, CP-602E-I, and CB-602I boards are cost-effective solutions.

Each active CAN interface board has two independent CAN controllers

with a DB9 connector. These CAN interface boards use the NXP SJA1000

and PCA82C251 transceiver, which provide bus arbitration and error

detection. In addition, all models support wide temperature and have 2

KV of isolation protection built in, making the boards suitable for harsh

industrial environments.

The CAN interface board series includes the following models:

CP-602U-I: 2-port CAN interface Universal PCI board with isolation

protection, 0 to 55°C operating temperature.

CP-602U-I-T: 2-port CAN interface Universal PCI board with isolation

protection, -40 to 85°C operating temperature.

CP-602E-I: 2-port CAN interface PCI Express board with isolation

protection, 0 to 55°C operating temperature.

CP-602E-I-T: 2-port CAN interface PCI Express board with isolation

protection, -40 to 85°C operating temperature.

CB-602I: 2-port CAN interface PC/104-Plus module with isolation

protection, 0 to 55°C operating temperature.

CB-602I-T: 2-port CAN interface PC/104-Plus module with isolation

protection, -40 to 85°C operating temperature.

Package Checklist

The following items are included in your CAN interface board package:

•CP-602U-I: Universal PCI Board with standard bracket, or

CB-602I: PC/104-Plus Module, or

CP-602E-I: PCI Express Board with standard bracket

•Document & Software CD-ROM

•Quick installation guide (printed)

•Warranty card

NOTE: Please notify your sales representative if any of the above items

are missing or damaged.

- 3 -

Software Installation Procedure

In this section, basic installation procedures are explained using Windows

XP installation to illustrate.

Initial Driver Installation

Step 1:

Run driv_win2k_can_x.x_build_ yymmddhh.exe, located

on the Documentation and S

oftware CD-ROM. Click Next to

begin installing the driver. (*Note: x.x = version, yy = year,

mm = month, dd = day, hh = hour)

Step 2:

Click Next

to install the driver in the indicated folder.

Step 3:

Click Install to proceed with the installation.

Step 4:

Moxa has thoroughly tested the driver for safe Windows

operation. Click

Finish to complete the driver installation.

After the installation is completed, the Moxa CAN interface board windows

driver folder will be located in the Start menu. The driver folder includes

Examples, Library Programming Guide, Library Reference, and Utility.

This content is provided to make it easy for users to develop their own

program.

Connecting the Hardware

After installing the driver, power off the PC, plug the Moxa CAN interface

board into any empty slot, and then power it on. Windows will

automatically detect the board and begin installing the driver. When

Windows finishes installing the driver for the board, it will detect the next

CAN controller, and will install another driver for the additional CAN

controller.

Windows XP, Windows 2003, and Windows Vista (32-bit

and 64-bit)

The following instructions are for Windows XP, Windows 2003, and

Windows Vista systems.

Step 1:

After plugging the CAN interface board into a slot, Windows will

automatically detect the new device. The

Found New

Hardware

balloon will appear in the bottom right corner of the

Windows desktop, but no action is required.

Step 2:

After a moment, the Found New Hardware Wizard will open.

Select

No, not this time, and then click Next.

Step 3:

Select Install the software automatically

(Recommended)

, then click Next.

Step 4:

Windows will spend a few moments installing the CAN interface

driver.

Step 5:

The next window indicates that Windows has completed the

installation. Click

Finish to continue with the installation

procedure.

Step 6:

After Windows has completed installing the Moxa CAN interface

board, it will automatically detect the new CAN controller.

- 4 -

Installing the Driver for the CAN controller

After the driver for the CAN interface board has been installed, Windows

will automatically detect the new CAN controller.

Step 1:

The Found New Hardware Wizard window will open to help

you install the driver. This window will offer to connect to the

Windows

update site to search for a driver. Select

No, not at

this time

and then click Next to continue.

Step 2:

Select Install the software automatically

(Recommended)

, and then click Next to continue.

Step 3:

Windows will spend a few moments installing the CA

controller driver.

Step 4:

After all files have been copied to the system, the Completing

the Found New Hardware Wizard

window will open to

indicate that it has finished installing the driver. Click

Finish

proceed with the rest of the installation.

Step 5:

Repeat Steps 1 through 4 for each of the remaining controllers.

Step 6:

The Found New Hardware balloon will reappear to inform

you that the hardware was installed successfully.

Specifications

Hardware

CAN Controller

NXP SJA1000

CAN Transceiver

PCA82C251

CAN Specification

CAN 2.0 A/B

Signal Support

CAN_H, CAN_L, GND

Board Interface

CP-602U-I: Universal PCI

CB-602I: PC/104-Plus bus module

CP602E-I: PCI Express x 1

Connectors CP-602U-I/CP-602E-I: DB9 male

CB-602I: 20-pin box header

Ports

Transfer rate

1 Mbps

Termination Resistor

120 ohms (selected by jumper)

Max. Module Support

4 pcs

Optical Isolation

2 KV

Software

Operating Systems

Windows 2000, Windows XP/2003/Vista/2008

(x86 and x64), Windows 7

Library

Visual Basic, C/C++

Physical Characteristics

Dimensions

CP-602U-I: 120 x 80 mm ( 4.72 x 3.15 in)

CB-602I: 90 x 96 mm ( 3.54 x 3.78 in)

CP-602E-I: 120 x 80 mm ( 4.72 x 3.15 in)

Environment Limits

Humidity (Operating)

5 to 95% RH

- 5 -

Operating Temperature

Standard Models

0 to 55° C (32 to 131° F)

Wide Temp.Models

-40 to 85° C (-40 to 185° F)

Storage Temperature

-40 to 85° C (-40 to 185° F)

Regulatory Approvals EN61000-3-3, IEC61000-4-2, IEC61000-4-3,

IEC61000-4-4, IEC61000-4-5, IEC61000-4-6,

IEC61000-4-8, IEC61000-4-11, FCC Part 15

Class B

Power Requirements

Power Consumption CP-602U-I: 365 mA @ 5 VDC

CB-602I: 380 mA @ 5 VDC

CP-602E-I: 780 mA @ 5 VDC

Warranty

Warranty period

5 years

Details

See www.moxa.com/warranty

Pin Assignments

DB9 Male Pinouts

Signal

CAN_L

CAN_GND

Shield

CAN_H

20-pin Box Header Pinouts

Signal

CAN0_L

CAN0_H

CAN_GND

Shield

CAN1_L

CAN1_H

CAN_GND

Shield

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Moxa Technologies Matériel informatique

Moxa Technologies

Moxa Technologies MAR-2000 Instructions d'utilisation

Moxa Technologies

Moxa Technologies Industio C114HI Manuel utilisateur

Moxa Technologies

Moxa Technologies WAPN008 Manuel utilisateur

Moxa Technologies

Moxa Technologies RKP-A110 Series Manuel utilisateur

Moxa Technologies

Moxa Technologies Smartio CP-104UL Manuel utilisateur

Moxa Technologies

Moxa Technologies C168P Manuel utilisateur

Moxa Technologies

Moxa Technologies UC-8410 Instructions d'utilisation

Moxa Technologies

Moxa Technologies CP-118U Series Manuel utilisateur

Moxa Technologies

Moxa Technologies UC-7420-CE Manuel utilisateur

Moxa Technologies

Moxa Technologies Smartio C104H Manuel utilisateur

Moxa Technologies

Moxa Technologies NPort Server Lite DE-302 Manuel utilisateur

Moxa Technologies

Moxa Technologies TC-6110 Series Manuel utilisateur

Moxa Technologies

Moxa Technologies CP-102U/UL Manuel utilisateur

Moxa Technologies

Moxa Technologies ioLogik 2500 Series Manuel utilisateur

Moxa Technologies

Moxa Technologies Smartio CP-168U Manuel utilisateur

Moxa Technologies

Moxa Technologies CI-104J Manuel utilisateur

Moxa Technologies

Moxa Technologies Industrial Serial Board CI-132 Manuel utilisateur

Moxa Technologies

Moxa Technologies Industio C114HI Manuel utilisateur

Moxa Technologies

Moxa Technologies CP-102N-T Manuel utilisateur

Moxa Technologies

Moxa Technologies DA-661 Manuel utilisateur

Moxa Technologies

Moxa Technologies CA-132/132I Manuel utilisateur

Moxa Technologies

Moxa Technologies W315A Manuel utilisateur

Moxa Technologies

Moxa Technologies ABC-02-USB Manuel utilisateur

Moxa Technologies

Moxa Technologies ThinkCore DA-660-16-LX Manuel utilisateur

Manuels Matériel informatique populaires d'autres marques

EMC2

EMC2 VNX Series Manuel du propriétaire

Panasonic

Panasonic DV0PM20105 Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuel utilisateur

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuel utilisateur

Raidon

Raidon iT2300 Manuel utilisateur

National Instruments

National Instruments PXI-8186 Manuel utilisateur

Hauppauge

Hauppauge WinTV-HVR-2250 Manuel utilisateur

Kontron

Kontron CP6002 Manuel utilisateur

Manhattan

Manhattan 702843 Manuel utilisateur

Aphex

Aphex 230 Manuel utilisateur

AMD

AMD Phenom II Manuel d'exploitation

Intel

Intel NUC 12 Pro Manuel utilisateur

dbx

dbx Zone Pro 1260 Manuel utilisateur

Galaxy

Galaxy GHDX2-2430S-24F4D Manuel utilisateur

Intel

Intel AXXRMFBU4 Manuel utilisateur

Kontron

Kontron DIMM-PC/MD Manuel utilisateur

ST X-NUCLEO-SAFEA1B Mode d'emploi

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuel utilisateur