MIMAKI TS500 Manuel utilisateur

Make sure to wear the attached

goggles and glove when you work.

TS500/Tx500 Daily Care

With a view to using this machine in a better condition, please be sure to the following daily care after at the end of the

daily work. Please refer to “Daily care manual” for the detail.

Cleaning of around the heads

Perform [HEAD MAINT.], move the carriage to the

maintenance position and open the left maintenance cover.

(1) Press the key in LOCAL.

(2) Press the key.

(3) Press to select [HEAD MAINT.].

(4) Press the key.

(5) Open the left maintenance cover.

2. Soak the clean stick or the waste cloth in the maintenance cleaning liquid and wipe off an

accumulated ink on the side of the head and on the bottom surface of the slider.

3. Soak the COTTON CIEGAL®in the maintenance cleaning liquid and wipe off the mark of

the cap rubber attached on the nozzle surface from the rear side to the front side.

4. Close the left maintenance cover.

5. Press , complete the cleaning.

Left maintenance

cover

MAINT.

ฌЭ

Side surface of the head (shown in deep gray)

Nozzle part Bottom surface of the slider (shown in gray)

[Before cleaning] [After cleaning]

• Do not touch the nozzle surface, because the cleaning will be performed in the procedure

No.3.

[Before cleaning] [After cleaning]

COTTON CIEGAL®

Mark of the cap

• Immerse much enough so that maintenance liquid may drip from it.

• Do not wipe the nozzle surface with dry COTTON CIEGAL®.

• If COTTON CIEGAL®has fluffed, replace it.

• If ink solid adheres to COTTON CIEGAL®, change the surface to use for cleaning or

replace it.

Cleaning of the station

Perform [STATION MAINT.], move the carriage to the

maintenance position and open the left maintenance cover.

(1) Press the key in LOCAL.

(2) Press the key.

(3) Press to select [STATION MAINT.].

(4) Press the key.

(5) Open the left maintenance cover.

Cleaning of the cap

Wipe off the ink of the cap rubber and cap cover with clean stick or waste cloth dipped in cleaning solution for

maintenance.

Cleaning of the wiper

Wipe off the ink of the wiper and bracket with clean stick or waste cloth dipped in cleaning solution for

maintenance.

Cleaning of the wiper blade

Wipe off the ink of the wiper blade with clean stick or waste cloth dipped in cleaning solution for maintenance.

2. Close the right maintenance cover.

3. Press , complete the cleaning.

Right maintenance

cover

MAINT.

[Before cleaning] [After cleaning]

Cap rubber

• After cleaning, make sure

that the cap rubber and mesh

in the cap are not removed.

Cap cover

Bracket

Wiper

[Before cleaning] [After cleaning]

• After cleaning, make sure the edge of the wiper is horizontal.

[Before cleaning] [After cleaning]

Wiper blade

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels MIMAKI Traceur

MIMAKI

MIMAKI APC-130 Manuel utilisateur

MIMAKI

MIMAKI Tx400 Manuel utilisateur

MIMAKI

MIMAKI CG-60SR Manuel utilisateur

MIMAKI

MIMAKI CF22-1225 Instructions d'installation

MIMAKI

MIMAKI CG-60AR Manuel utilisateur

MIMAKI

MIMAKI CF22-1225 Manuel utilisateur

MIMAKI

MIMAKI TEXTILE JET TX400 Manuel utilisateur

MIMAKI

MIMAKI DM3-1810S Manuel utilisateur

MIMAKI

MIMAKI CG-60SL Manuel utilisateur

MIMAKI

MIMAKI CG-AR Series Manuel technique

MIMAKI

MIMAKI UJF-605C Instructions de montage

MIMAKI

MIMAKI CF-0912 Manuel utilisateur

MIMAKI

MIMAKI CF2 Series Manuel utilisateur

MIMAKI

MIMAKI CG-FX SERIES Manuel utilisateur

MIMAKI

MIMAKI DS-1600 Manuel utilisateur

MIMAKI

MIMAKI CG-60AR Instructions d'installation

MIMAKI

MIMAKI CJV30 Series Manuel utilisateur

MIMAKI

MIMAKI TS34-1800A Guide de référence

MIMAKI

MIMAKI JV4 Series Manuel utilisateur

MIMAKI

MIMAKI CG-75FXII Manuel utilisateur

MIMAKI

MIMAKI CG-60SL Instructions de montage

MIMAKI

MIMAKI CG-60EX Manuel utilisateur

MIMAKI

MIMAKI UJF-7151 plus Manuel utilisateur

MIMAKI

MIMAKI JV3-160SP Manuel utilisateur

Manuels Traceur populaires d'autres marques

MUTOH

MUTOH Kona 760 Manuel utilisateur

HP 7475a Manuel utilisateur

Vulcan-Hart

Vulcan-Hart FC-500VC Manuel utilisateur

Roland

Roland TrueVIS VG-640 Manuel du propriétaire

Furuno

Furuno RP-180 Manuel utilisateur

Roland

Roland VersaCamm SP-540V Manuel utilisateur

Ioline

Ioline Summit Manuel utilisateur

Summa

Summa S CLASS Manuel utilisateur

Gerber Technology

Gerber Technology GERBERplotter MP Series Manuel utilisateur

Furuno

Furuno RP-17 Manuel utilisateur

HP 7470A Manuel utilisateur

SII

SII LP-1010 Manuel utilisateur

Great Computer

Great Computer JII-61 Manuel utilisateur

Roland

Roland VersaUv LEF - 12i Manuel utilisateur

Lectra

Lectra Alys 120 Manuel utilisateur

MUTOH

MUTOH Ultima SC-850D Manuel utilisateur

Skycut

Skycut D Series Manuel utilisateur

Commodore

Commodore 1520 Manuel utilisateur