Microcyber FOUNDATION FIELDBUS NCS-TT106F Manuel utilisateur

NCS-TT106F

FOUNDATION FIELDBUS series

Intelligent Temperature Transmitter

User Manual

http://www.microcyber.cn/en

~ I ~

Waring

1. It is forbidden for users to disassemble the temperature module by themselves.

2. Please check if the supply voltage of temperature transmitter meets the power supply voltage requirements in

the manual.

Version

：

V1.0

Disclaimer

The contents of this manual have been checked to confirm the consistency of the hardware and software described.

Since errors cannot be completely ruled out, absolute consistency cannot be guaranteed. However, we will regularly

check the data in this manual and make necessary corrections in subsequent versions. Any suggestions for

improvement are welcome.

Microcyber Corporation 2020

Technical data is subject to change.

http://www.microcyber.cn/en

~ II ~

Company Introduction

Microcyber Corporation,established as a high-tech enterprise by the Shenyang Institute of Automation Chinese

Academy of Sciences, mainly engages in advanced industrial control systems, equipments, instruments and chips

for industrial process automation control solutions in the research, development, production and application.

Microcyber undertakes a number of national scientific and technical key task and “863” project, and has Liaoning

Province networked control systems engineering research center.

Microcyber successfully developed the FF H1 fieldbus protocol stack which is number one to be approved

internationally in China, and the Industrial Ethernet Protocol(HSE) which is number one to be approved in China,

and the domestic first fieldbus instrument which has a function of national-level intrinsically safe explosion--proof

and safety barrier. Also Microcyber participated in the drafting of the domestic first Ethernet-based industrial

automation protocol standards (Ethernet for Plant Automation, EPA). As a result, serial products are composed of

configuration, control software, embedded software, control system, instrument chip to the OEM board, and make

Microcyber be an industrial automation products provider in full range, and also further Microcyber‟s leading

position in the field of fieldbus technology.

Microcyber is the member of FieldComm Group(FCG) and Profibus National Organization (PNO) .

Microcyber passes the Authentication of ISO 9001 Quality System, and has an outstanding innovative R&D team,

plentiful practical experiences of design of the Automatic engineering, a leading product series, a huge market

network, a strict quality management system and an excellent enterprise culture. All these further a solid

foundation of entrepreneurship and sustainable development for Microcyber.

Carrying the ideals of employees, creating customer value and promoting enterprise development.

http://www.microcyber.cn/en

~ III ~

CATALOGUE

1 OVERVIEW ........................................................................................................................................................... 1

2 TEMPERATURE TRANSMITTER INSTALLATION ..................................................................................................... 2

2.1 DIMENSIONS ............................................................................................................................................................ 2

2.2 INSTALLATION ........................................................................................................................................................... 2

2.3 WIRING .................................................................................................................................................................. 4

3 FOUNDATION FIELDBUS PROTOCOL TEMPERATURE TRANSMITTER CONFIGURATION ....................................... 5

3.1 TOPOLOGY CONNECTION ............................................................................................................................................ 5

3.2 FUNCTION BLOCK ...................................................................................................................................................... 6

3.3 TRANSDUCER BLOCK CONFIGURATION EXAMPLE .............................................................................................................. 6

3.3.1 Connecting a resistance sensor ................................................................................................................... 6

3.3.2 Connect RTD thermal resistance sensor ...................................................................................................... 7

3.3.3 Connect-/ + 100mV signal sensor ................................................................................................................ 7

3.3.4 Connect TC Thermocouple Sensor .............................................................................................................. 7

3.3.5 Custom TC thermocouple sensor ................................................................................................................ 7

3.3.6 Custom RTD thermal resistance sensor ....................................................................................................... 8

3.4 FUNCTION CONFIGURATION ........................................................................................................................................ 8

3.4.1 Setting up the configuration environment .................................................................................................. 9

3.4.2 Import DD file .............................................................................................................................................. 9

3.4.3 Device online detection ............................................................................................................................. 10

3.4.4 Sensor configuration .................................................................................................................................. 10

3.4.5 Two-wire zero calibration configuration .................................................................................................... 11

3.4.6 Two-point linearization calibration ............................................................................................................ 12

3.4.7 Multipoint linearization calibration ........................................................................................................... 13

3.4.8 Enabling cold junction temperature compensation .................................................................................. 14

3.5 FUNCTION BLOCK CONFIGURATION ............................................................................................................................. 15

4 MAINTENANCE .................................................................................................................................................. 20

5 TECHNICAL SPECIFICATIONS .............................................................................................................................. 21

5.1 BASIC PARAMETERS ................................................................................................................................................. 21

5.2 THERMAL RESISTANCE TECHNICAL INDEX ...................................................................................................................... 21

5.3 THERMOCOUPLE TECHNICAL INDICATORS ..................................................................................................................... 22

5.4 PHYSICAL CHARACTERISTICS ...................................................................................................................................... 22

http://www.microcyber.cn/en

~ 1 ~

1 Overview

NCS-TT106F intelligent temperature transmitter adopts field bus technology, is a new generation of intelligent

temperature transmitter, is an indispensable field device in process control. The device integrates a wealth of

functional modules, which can achieve both general detection functions and complex control strategies.

NCS-TT106F adopts digital technology and can be applied to a variety of thermal resistance and thermocouple

sensors. It has a wide measuring range and a simple interface between the field and the control room.

NCS-TT106F series intelligent temperature transmitter supports Foundation Fieldbus protocol, which can be widely

used in petroleum, chemical, electric power, metallurgy and other industries.

http://www.microcyber.cn/en

~ 2 ~

2 Temperature transmitter installation

2.1 Dimensions

Figure 2.1 Dimension of Temperature Transmitter（Unit：mm）

2.2 Installation

Fix the temperature transmitter into the temperature housing or din rail by positioning the two screws through the

positioning hole.

Φ5. 5

Φ24

Φ45

110

NCS-TT106F-R1

5+ 6- 8N7S

1 2 3 4

5 6 7 8

http://www.microcyber.cn/en

~ 3 ~

Figure 2.2 Installation

OFF

http://www.microcyber.cn/en

~ 4 ~

2.3 Wiring

Figure 2.3 Wiring

The power supply of NCS-TT106F temperature transmitter and bus signal share a pair of cables, called bus cable. It

is recommended to use the fieldbus dedicated cable recommended by IEC61158-2. The signal cable and bus cable

should not share the conduit or open channel with the power cables of other equipment, and should be far away

from high-power equipment. The shielded wires at both ends of the bus are grounded by single-ended grounding.

Connect to the bus and

provide bus power

TC,mV

2-wire

RTD Ω

3-wire

RTD Ω

4-wire

RTD Ω

NCS-TT106F

Connect to the bus

and provide bus power

TC,mV

2-wire

RTD Ω

3-wire

RTD Ω

4-wire

RTD Ω

NCS-TT106F-R1

http://www.microcyber.cn/en

~ 5 ~

3 Foundation Fieldbus Protocol Temperature Transmitter Configuration

3.1 Topology Connection

Foundation Fieldbus transmitter supports multiple network topology wiring methods, as shown in Figure 3.1 Figure

3.2 shows the bus connection of the FOUNDATION FIELDBUS transmitter. Both ends of the bus need to be

connected with terminal matching resistors to ensure signal quality. The maximum length of the bus is 1900 meters,

and it can be extended to 10 kilometers by using repeaters.

Figure 3.1 Foundation Fieldbus network topology

Figure 3.2 Foundation Fieldbus bus connection

Point to Point Bus with branch Daisy chain Tree type

Parameterized configuration tool

NCS-TT106F NCS-TT106F NCS-TT106F NCS-TT106F NCS-TT106FNCS-TT106FNCS-TT106FNCS-TT106F

Control master station

Fieldbus I/O

FOUNDATION FIELDBUS

Junction box

Terminator

Fieldbus

power supply

Master

device

FF bus FF bus

Max 1900m

NCS-TT106FNC S-TT10 6F

NCS-TT106F

Terminator

http://www.microcyber.cn/en

~ 6 ~

3.2 Function block

The FOUNDATION FIELDBUS type NCS-TT106F temperature transmitter implements the FOUNDATION FIELDBUS

standard function block, see the table below. For the configuration method of the function block, please refer to

the FOUNDATION FIELDBUS protocol related documents.

Name

Description

Resource Block

Resource block, used to describe the characteristics of field devices, such as

device name, manufacturer, and serial number. The resource block has no input

or output parameters. A device usually has only one resource block

TEMP_SENSOR 1(TTB)

Transducer block, read the sensor hardware data, or write the field data to the

corresponding hardware. Transducer block contains information such as range,

sensor type, linearization, I / O data, etc.

CUSTOM_BLOCK1(CTB)

Transducer block, expand the function of transducer block 1, mainly to

complete the user's secondary calibration and user-defined sensor type

function

AI 1(AI)

Analog Input function block 1 (AI 1). Obtain the analog process value from the

transducer block through the internal channel, process it, and provide the

appropriate measured value to the master device through bus communication

AI 2(AI)

Analog Input function block 2 (AI 2). Obtain the ambient temperature value

from the transducer block through the internal channel and process it, and

provide the appropriate measured value to the master device through bus

communication

PID1(PID)

Proportional-Integral-Derivative function block (PID). Use this function block to

realize the split-range control process

3.3 Transducer block configuration example

NCS-TT106F temperature transmitter can connect various types of sensors, such as resistance sensor, RTD thermal

resistance sensor, TC thermocouple sensor, -/ + 100mV signal, custom RTD thermal resistance sensor and custom

TC thermocouple sensor. The following describes the connection and configuration of each type of sensor.

3.3.1 Connecting a resistance sensor

NCS-TT106F temperature transmitter can measure 0-500Ω and 0-4000Ω resistance signals. When the resistance

signal sensor is connected, the parameters in the transducer block are configured as follows：

SENSOR_TYPE = 0-500Ω or 0-4000Ω

SENSOR_CONNECTION = Two Wires or Three Wires or Four Wires

PRIMARY_VALUE_UNITS_INDEX = Ohm or kOhm

RJ_TYPE = N/A(ignore)

Table des matières

Autres manuels Microcyber Émetteur

Microcyber

Microcyber CS-TT106H-V2.0 Manuel utilisateur

Microcyber

Microcyber NCS-PT105II Manuel utilisateur

Microcyber

Microcyber NCS-TT106H-R1 Manuel utilisateur

Manuels Émetteur populaires d'autres marques

NIVELCO

NIVELCO EasyTREK SCA-300 Series Manuel du propriétaire

Honeywell

Honeywell 5816WMBR Manuel utilisateur

Kamstrup

Kamstrup READy MTU Mode d'emploi

Omega

Omega ZW Series Manuel utilisateur

ABB

ABB Field 264H Mode d’emploi

Alinco

Alinco DJ-V17T Manuel utilisateur

Dejero

Dejero EnGo 3x Manuel utilisateur

Rosemount

Rosemount 4600 Manuel utilisateur

Speaka Professional

Speaka Professional 2342740 Manuel utilisateur

trubomat

trubomat GAB 1000 Manuel utilisateur

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 Manuel utilisateur

Rondish

Rondish UT-11 Manuel utilisateur

MG 10JRE Manuel utilisateur

Burkert

Burkert 8177 Manuel utilisateur

Firetide

Firetide HotPort 3203 Manuel

Tele Radio

Tele Radio T9-02 Manuel utilisateur

Rotronic

Rotronic HygroFlex HF3 Series Manuel utilisateur

Jamara

Jamara FCX6 Pro Tel Manuel utilisateur