Maxtor MaxAttach NAS 4000 Manuel utilisateur

Table des matières

Autres manuels Maxtor Stockage

Maxtor

Maxtor Personal Storage 3200 300GB Manuel utilisateur

Maxtor

Maxtor DiamondMax10 80 Mode d’emploi

Maxtor

Maxtor D540X-4K Manuel utilisateur

Maxtor

Maxtor 33073H4 Manuel utilisateur

Maxtor

Maxtor FireWire 800 Manuel utilisateur

Maxtor

Maxtor OneTouch II E01V200 Manuel utilisateur

Maxtor

Maxtor DiamondMax Plus 2500 Manuel utilisateur

Maxtor

Maxtor OneTouch 4 Plus Manuel utilisateur

Maxtor

Maxtor Maxtor OneTouch USB Manuel d'installation

Maxtor

Maxtor OneTouch 4 Plus Manuel utilisateur

Maxtor

Maxtor BlackArmor Manuel utilisateur

Maxtor

Maxtor SERIAL ATA HARD DRIVE Manuel utilisateur

Maxtor

Maxtor ONETOUCH 1.5TB Manuel utilisateur

Maxtor

Maxtor 87000A8 Mode d’emploi

Maxtor

Maxtor Personal Storage 3100 Manuel utilisateur

Maxtor

Maxtor 4320 Manuel utilisateur

Maxtor

Maxtor OneTouch II Manuel utilisateur

Maxtor

Maxtor ATLAS 10K IV Manuel utilisateur

Maxtor

Maxtor OneTouch II E01A200 Manuel utilisateur

Maxtor

Maxtor D740X-6L 20.0 AT Manuel utilisateur

Maxtor

Maxtor Personal Storage 3000XT Manuel utilisateur

Maxtor

Maxtor DiamondMax VL 30 Series Manuel utilisateur

Maxtor

Maxtor Atlas SCSI Drive 15K II Manuel utilisateur

Maxtor

Maxtor STM940215A - Maxtor MobileMax 40 GB Hard... Manuel utilisateur

Manuels Stockage populaires d'autres marques

QNAP

QNAP TS 32PXU Series Manuel utilisateur

LaCie

LaCie RUGGED RAID Manuel utilisateur

Freecom

Freecom CLS DOCK Manuel utilisateur

PNY

PNY Attache P-FD64MBATT3 Manuel utilisateur

HP

HP StorageWorks MSL2024 Manuel utilisateur

OLT

OLT 6x6 Maximizer Manuel utilisateur

Transcend

Transcend JetFlash 160 Manuel utilisateur

LaCie

LaCie RUGGED MINI Manuel utilisateur

Thunderbolt

Thunderbolt 600 Manuel utilisateur

Panasonic

Panasonic LB-DH8 series Manuel

Intel

Intel RAID High Availability Manuel utilisateur

LaCie

LaCie 12big Thunderbolt 3 Manuel utilisateur

Spectra Logic

Spectra Logic T-Series Spectra T50e Manuel utilisateur

Panasonic

Panasonic LKM-F931-1 Manuel utilisateur

Tabernus

Tabernus Enterprise Erase E2400 Manuel utilisateur

Rocstor

Rocstor COMMANDER 3F series Manuel utilisateur

HP

HP P9000 Manuel utilisateur

Western Digital

Western Digital Ultrastar Data60 Manuel utilisateur

MaxAttach NAS 4000 Quick Start Card

MaxAttach™NAS 4000 is an easy to use network rack mount storage appliance for file sharing on

Microsoft and UNIX/Linux platforms. Ideal for your office, business or workgroup, it presents the

most cost-effective way to increase your network storage, and it eliminates the need for expen-

sive server upgrades. It also includes pre-loaded server software for plug-and-work operation.

Unit Information

Please record the following information found on the bottom of the MaxAttach unit. This

information will be needed to identify your unit for configuration or Maxtor Support.

❍Model Number:

❍Serial Number/Device ID:

Necessary Equipment for Installation

To connect, install and administer your MaxAttach NAS 4000, you will need a network

hub or switch. You will also need the following capabilities on your workstation:

❍Windows 95/98/NT (SP5)/2000 with network access

❍Internet Explorer v4.01 or later, or Netscape v4.08 or later

❍10/100 Mbps Ethernet Network Interface Card, (NIC)

❍Software drivers for the NIC

❍TCP/IP Enabled

❍CD-ROM drive

Get user manuals: See SafeManuals.com

1Connect MaxAttach To Your Network

1. To connect the MaxAttach unit to the network, insert the cable that came with

the unit into the network connection on the back of MaxAttach. Insert the other

end into a 10/100 BASE-T Ethernet connection on your network hub or switch.

Use the power cord to connect the MaxAttach to a power source.

2. Power on MaxAttach by pressing the On/Off rocker switch next to the power

cord in the back of the unit. Then press the power standby button on the other

side of the back panel. On the front panel of the box, the power light will flash

for several minutes during the power-up cycle. When the power light stops

flashing and the network light is on, your MaxAttach is ready to configure.

2Install the MaxNeighborhood Software

1. Insert the self-launching CD in the CD-ROM drive and follow the on-screen

installation instructions.

2. A welcome screen will appear with options to install MaxNeighborhood or to

Register Online. Click the Install MaxNeighborhood button.

3. When the installation is complete, you will be given the option to launch.

To launch, click FINISH. A MaxNeighborhood window will appear with a

“SEARCHING, Please Wait….” message – indicating that the computer

is searching for MaxAttach units. When the search is complete, the grid

window will display the MaxAttach unit(s) on your network.

3Launch the Configuration Wizard

1. Highlight and double-click on the name of your MaxAttach unit in the

MaxNeighborhood window.

2. The Configuration Wizard will help you set the clock, assign an administrator

password and assign a unit name and workgroup. The system will restart

with the updated settings.

3. You’re Done! For more details on configuration, installation and trouble

shooting, please refer to the MaxAttach NAS 4000 Installation Guide.

Technical support is available at 1-800-4MAXTOR and at www.maxtor.com

© 2000 Maxtor Corporation. All rights reserved. Maxtor is a registered trademark of Maxtor Corporation. MaxAttach and

MaxNeighborhood are trademarks of Maxtor Corporation. Other product, company names and logos are trademarks or registered

trademarks of their respective owners. Specifications subject to change without notice. Printed in the U.S.A. 04/00 1473B

Get user manuals: See SafeManuals.com