Maxtor OneTouch II Manuel utilisateur

3Set up the OneTouch feature

1. Push the button on the front of your drive.

The EMC Dantz Retrospect Express HD Server

registration screen will appear.

2. Complete the registration form.

Note: In order to register, you must be

connected to the internet.

3. After you complete the registration, the

Retrospect Express HD Server welcome screen

will appear, displaying the automated backup

settings for your computer.

You may back up your computer immediately

by clicking Back up now,let Retrospect

Express HD Server do it automatically at the

next scheduled backup time, or do it at any

time by pressing the button on the front of

your drive or clicking Back up now.

Your installation is complete!

1Insert the Installation CD into

your CD-ROM drive

To install the Maxtor OneTouch II Small Business

Edition software and the Dantz®Retrospect®

Express HD Server software:

1. Insert the Installation CD.

2. Wait for the Maxtor screen to appear.

3. Follow the on-screen instructions to install

the software. For details, refer to Chapter 2

in the User’sGuide, on the Installation CD.

4. After completing installation, eject the CD.

Do not remove the CD until all steps of the

installation are complete.

Installation Software

Maxtor OneTouch™IISmall Business Edition

2Connect the drive to your computer

Plug in the power adapter, turn the power switch on

and plug in the USB cable. For details, refer to the

Connecting the Drive section in Chapter 2 of the

User’s Guide.

Allow up to 2 minutes for your computer to

recognize the drive.

This Installation describes the Full Installation with Dantz Retrospect

Express HD Server. If you wish to install your drive without Dantz

Retrospect Express HD Server,choose the ‘Install Drivers’ option to

install the Maxtor software only. For more information, go to Chapter 2

of the User’sGuide on the Install CD. The Maxtor OneTouch feature

will not work unless you install Dantz Retrospect Express HD Server.

Ifyou did not install Dantz Retrospect Express HD

Server, you may skip this step.

Windows 2000 and XP

You must have Administrative Privileges. Refer to chapter 2

of the User’s Guide on the Install CD for more information.

Maxtor OneTouch

Button

Maxtor OneTouch™II Small Business Edition

Quick Start Guide

For more detailed information, please refer to the User’s Guide located on the Install CD (also available at www.maxtor.com).

SERVER BACKUP

To restore your Windows system

Note: The drive MUST be disconnected from the system during the

OS installation.

1. Prepare your internal hard drive.

Partition, if necessary, and format.

Note: Do not partition or reformat the Maxtor OneTouch II Small Business

Edition drive that your system is stored on.

2. Install your operating system.

The following services packs need to be installed:

•Windows XP: Service Pack 1 or later.

•Windows 2000: Service Pack 3 or later.

Microsoft Internet Explorer 5.01 or later is required for all Windows

operating systems.

3. Re-install the Maxtor OneTouch II software including EMC Dantz

Retrospect Express HD Server.

4. Open Retrospect Express HD Server.

5. Set up the Restore.

Click Restore.

Acalendar window will appear showing all of your restore points.

6. Select your restore point.

Click the restore point that you wish to restore and click Next.

Note: For more information about restore points and using Retrospect

Express HD, see ‘Using Retrospect Express HD Server’ in chapter 5 of

the User’s Guide on the Install CD.

You are now asked which files and folders you would like to restore.

7. Select your entire computer for restore.

Place a check next to My Computer and click Next.

8. Select the location of your restore.

You will now select where you want to restore your files.

Select To Their Original Location On,to restore them to the exact

location from which they were originally copied.

Note: All data will be replaced at the location you have chosen to

restore with the files and folders you have chosen to restore.

9. Start the Restore.

Click Restore.

Retrospect Express HD Server will start restoring files on your computer.

Astatus bar will show the progress until the restore is finished.

10. Exit Retrospect Express HD Server.

If your system restore was successful, you can exit Retrospect Express

HD Server. Click the red ‘X’ in the upper right corner of the window.

11. Finishing the restore.

Restart your computer.

Your system may require more than one restart.

Follow any additional on-screen instructions, if

necessary, to complete your system restore.

Restoring your System

Windows 2000 and XP

If your system is damaged and you need to restore it from your backup copy, follow the steps below:

www.maxtor.com

Maxtor P/N: 20278300

is a trademark of Maxtor Corporation. Dantz and Retrospect are either registered trademarks or trademarks of

EMC Corporation. Specifications subject to change without notice.

Autres manuels pour OneTouch II

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Maxtor Stockage

Maxtor

Maxtor MaXLine III Manuel utilisateur

Maxtor

Maxtor DiamondMax Plus 5120 Manuel utilisateur

Maxtor

Maxtor DIAMONDMAX 2880 Manuel utilisateur

Maxtor

Maxtor Maxtor OneTouch 4 Mini Manuel utilisateur

Maxtor

Maxtor Quickview 40 Manuel utilisateur

Maxtor

Maxtor OneTouch II Manuel utilisateur

Maxtor

Maxtor Personal Storage 3000XT Manuel utilisateur

Maxtor

Maxtor 91360D8 Mode d’emploi

Maxtor

Maxtor ONETOUCH STM315004OTDB06-RK Manuel utilisateur

Maxtor

Maxtor OneTouch 4 Plus Manuel utilisateur

Maxtor

Maxtor Maxtor OneTouch USB Manuel utilisateur

Maxtor

Maxtor Personal Storage 3000XT Instructions d'installation et d'utilisation

Maxtor

Maxtor DiamondMax 22 Manuel utilisateur

Maxtor

Maxtor 2R015H1 Manuel utilisateur

Maxtor

Maxtor Atlas SCSI Drive 15K II Manuel utilisateur

Maxtor

Maxtor Computer Drive Manuel utilisateur

Maxtor

Maxtor D540X-4K Manuel utilisateur

Maxtor

Maxtor STM3160215AS Manuel utilisateur

Maxtor

Maxtor Personal Storage 5000DV Manuel utilisateur

Maxtor

Maxtor MaxAttach NAS 3000 Manuel utilisateur

Maxtor

Maxtor Personal Storage 3200 300GB Manuel utilisateur

Maxtor

Maxtor DIAMONDMAXTM PLUS 5120 90750D3 Manuel utilisateur

Maxtor

Maxtor STM31000528AS Manuel utilisateur

Maxtor

Maxtor 51536H2 Manuel utilisateur

Manuels Stockage populaires d'autres marques

QNAP

QNAP TS 32PXU Series Manuel utilisateur

LaCie

LaCie RUGGED RAID Manuel utilisateur

Freecom

Freecom CLS DOCK Manuel utilisateur

PNY

PNY Attache P-FD64MBATT3 Manuel utilisateur

HP StorageWorks MSL2024 Manuel utilisateur

OLT

OLT 6x6 Maximizer Manuel utilisateur

Transcend

Transcend JetFlash 160 Manuel utilisateur

LaCie

LaCie RUGGED MINI Manuel utilisateur

Thunderbolt

Thunderbolt 600 Manuel utilisateur

Panasonic

Panasonic LB-DH8 series Manuel

Intel

Intel RAID High Availability Manuel utilisateur

LaCie

LaCie 12big Thunderbolt 3 Manuel utilisateur

Spectra Logic

Spectra Logic T-Series Spectra T50e Manuel utilisateur

Panasonic

Panasonic LKM-F931-1 Manuel utilisateur

Tabernus

Tabernus Enterprise Erase E2400 Manuel utilisateur

Rocstor

Rocstor COMMANDER 3F series Manuel utilisateur

HP P9000 Manuel utilisateur

Western Digital

Western Digital Ultrastar Data60 Manuel utilisateur