M-system R7C-EC8C Manuel utilisateur

R7C-EC8C

P. 1 / 3EM-7801-AH

RELAY CONTACT OUTPUT EXTENSION MODULE, 8 points

(CC-Link V.1.10) MODEL

R7C-EC8C

INSTRUCTION MANUAL

BEFORE USE ....

Thank you for choosing M-System. Before use, please check

contents of the package you received as outlined below.

If you have any problems or questions with the product,

please contact M-System’s Sales Ofﬁce or representatives.

■ PACKAGE INCLUDES:

Discrete output extention module ............................... (1)

■ MODEL NO.

Conﬁrm Model No. marking on the product to be exactly

what you ordered.

■ INSTRUCTION MANUAL

This manual describes necessary points of caution when

you use this product, including installation, connection and

basic maintenance procedures.

POINTS OF CAUTION

■ GENERAL PRECAUTIONS

Before you remove the unit or mount it, turn off the power

supply and input signal for safety.

■ ENVIRONMENT

• Indoor use

• When heavy dust or metal particles are present in the air,

install the unit inside proper housing with sufﬁcient ven-

tilation.

• Do not install the unit where it is subjected to continuous

vibration. Do not subject the unit to physical impact.

• Environmental temperature must be within -10 to +55°C

(14 to 131°F) with relative humidity within 30 to 90% RH

in order to ensure adequate life span and operation.

■ WIRING

• Do not install cables (power supply, input and output)

close to noise sources (relay drive cable, high frequency

line, etc.).

• Do not bind these cables together with those in which

noises are present. Do not install them in the same duct.

■ AND ....

The unit is designed to function as soon as power is sup-

plied, however, a warm up for 10 minutes is required for sat-

isfying complete performance described in the data sheet.

R7C-EC8C

P. 2 / 3EM-7801-AH

+24V

COM0

COM1

NO.

 ID FUNCTION

NO.

 ID FUNCTION

1 0V 0V 10 +24V 24V DC

2 COM0 Common 0 11 Y0 Output 0

3 COM0 Common 0 12 Y1 Output 1

4 COM0 Common 0 13 Y2 Output 2

5 COM0 Common 0 14 Y3 Output 3

6 COM1 Common 1 15 Y4 Output 4

7 COM1 Common 1 16 Y5 Output 5

8 COM1 Common 1 17 Y6 Output 6

9 COM1 Common 1 18 Y7 Output 7

■ OUTPUT TERMINAL ASSIGNMENT

COMPONENT IDENTIFICATION

0 1 2 3 4 5 6 7

10 11 12 13

2 3 41

15 16 17 18

7 8 96

Discrete I/O Status Indicator LED

Output Terminals

■ DISCRETE I/O STATUS INDICATOR LED

Discrete I/O modules including those for extensions have

LED indicators showing I/O signal status.

Contact ON : LED ON

Contact OFF : LED OFF

EXTERNAL DIMENSIONS unit: mm (inch)

11.5

(.45)

10 11 12 13

2 3 41

15 16 17 18

7 8 9

94 (3.70)

30 (1.18) [5 (.20)]

DIN RAIL

35mm wide

54 (2.13)

17 (.66)

18–M3 SCREW

TERMINALS

for OUTPUT

6 (.24)

3 (.12)5.5 (.22) 50 (1.97) 18.5 (.73)

R7C-EC8C

P. 3 / 3EM-7801-AH

M-SYSTEM WARRANTY

M-SystemwarrantssuchnewM-Systemproductwhichitmanufacturestobefreefromdefectsinmaterialsandworkmanshipduringthe36-monthperiodfollowingthedatethatsuch

productwasoriginallypurchasedifsuchproducthasbeenusedundernormaloperatingconditionsandproperlymaintained,M-System’ssoleliability,andpurchaser’sexclusive

remedies,underthiswarrantyare,atM-System’soption,therepair,replacementorrefundofthepurchasepriceofanyM-Systemproductwhichisdefectiveunderthetermsofthis

warranty.Tosubmitaclaimunderthiswarranty,thepurchasermustreturn,atitsexpense,thedefectiveM-Systemproducttothebelowaddresstogetherwithacopyofitsoriginal

salesinvoice.

THISISTHEONLYWARRANTYAPPLICABLETOM-SYSTEMPRODUCTANDISINLIEUOFALLOTHERWARRANTIES,EXPRESSORIMPLIED,INCLUDINGANYIMPLIED

WARRANTIESOFMERCHANTABILITYORFITNESSFORAPARTICULARPURPOSE.M-SYSTEMSHALLHAVENOLIABILITYFORCONSEQUENTIAL,INCIDENTALOR

SPECIALDAMAGESOFANYKINDWHATSOEVER.

M-SystemCo.,Ltd.,5-2-55,Minamitsumori,Nishinari-ku,Osaka557-0063JAPAN,Phone:(06)6659-8201,Fax:(06)6659-8510,E-mail:[email protected]

WIRING INSTRUCTIONS

■ SOLDERLESS TERMINAL mm (inch)

Refer to the drawing below for recommended ring tongue

terminal size. Spade tongue type is also applicable. Solder-

less terminals with insulation sleeve do not ﬁt. Applicable

wire size: 0.3 – 0.75 mm2

CONNECTION DIAGRAM

Connect the unit as in the diagram below.

3.2 (.13) dia.

4 min.

(.16)

12 (.47) max.

6 max.

(.24)

3 (.12) max.

� Output Connection Examples

4 Points per Common

+24V

24V DC

+ –

COM0

+−

COM1

+−

8 Points per Common

+24V

24V DC

+ –

COM0

COM1

+ –

COM0

COM1

+24V

COM1

–

EXTENSION CONNECTOR

CONNECTING THE EXTENSION MODULE

1) Remove the extension connector cover located at the side

of the basic module.

2) Connect the extension module.

3) Mount the combined module on a DIN rail.

Autres manuels M-system Unité de contrôle

M-system

M-system R7C-EC8A/UL Manuel utilisateur

M-system

M-system 61A Manuel utilisateur

M-system

M-system R7D-MS4 Manuel utilisateur

M-system

M-system R7M-RS4 Manuel utilisateur

M-system

M-system R3-NM3 Manuel utilisateur

M-system

M-system R3-PA16 Manuel utilisateur

M-system

M-system R7C-EA8 Manuel utilisateur

M-system

M-system 61F Manuel utilisateur

M-system

M-system R3-CT4A Manuel utilisateur

M-system

M-system MECHATROLINK R7K4FML3-6-DAC32B Manuel utilisateur

M-system

M-system Mini-M M2DL Manuel utilisateur

M-system

M-system R3-AS4 Manuel utilisateur

M-system

M-system R7C-EC16B/UL Manuel utilisateur

M-system

M-system R3Y-SS8 Manuel utilisateur

M-system

M-system R30US2 Manuel utilisateur

M-system

M-system R7L-EC8A Manuel utilisateur

M-system

M-system R5-TS Manuel utilisateur

M-system

M-system R7M-YS2 Manuel utilisateur

M-system

M-system R7HL-DC16B-R Manuel utilisateur

M-system

M-system R3-NF1 Manuel utilisateur

M-system

M-system R7G4FML3-6-DC16A Manuel utilisateur

M-system

M-system M6SXF3 Manuel utilisateur

M-system

M-system R7M-DC4G Manuel utilisateur

M-system

M-system R3-NF2 Manuel utilisateur

Manuels Unité de contrôle populaires d'autres marques

Festo

Festo Compact Performance CP-FB6-E Manuel de la liste des pièces

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur

JS Automation

JS Automation MPC3034A Manuel utilisateur

JAUDT

JAUDT SW GII 6406 Series Guide rapide

Spektrum

Spektrum Air Module System Manuel utilisateur

BOC Edwards

BOC Edwards Q Series Manuel utilisateur

KHADAS

KHADAS BT Magic Manuel utilisateur

Etherma

Etherma eNEXHO-IL Manuel utilisateur

PMFoundations

PMFoundations Attenuverter Manuel utilisateur

GEA

GEA VARIVENT Manuel utilisateur

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuel utilisateur

Altronix

Altronix LINQ8PD Instructions de montage

Eaton

Eaton Powerware Series Manuel utilisateur

WAGO

WAGO 750-407/040-000 Manuel utilisateur

Sony

Sony CCU-590 Manuel utilisateur

Graco

Graco 25D614 Manuel utilisateur

Task Force Tips

Task Force Tips YE-RF-900 Manuel de programmation

Shini

Shini SPV-U Series Manuel utilisateur