LINSHANG LS130 Manuel utilisateur

Shenzhen Linshang Technology Co., Ltd.

2019-7-25 Page 1 of 9

LS130

UV Energy Meter

User Manual V2.01

Please read this manual carefully before using and reserve it for reference.

Shenzhen Linshang Technology Co., Ltd.

2019-7-25 Page 2 of 9

I. Product Introduction

This instrument can measure the UV energy, UV irradiance at the same time. It can be used to measure

the UV irradiance and energy of UV drying machine, exposure machine and printing machine, etc. It’s

suitable for the UV intensity and energy measurement of high pressure mercury lamp and the halogen

lamp.

II. Parameters

1. Spectral range：315nm-400nm ，λp = 365nm

2. Irradiance measuring range：0-2000mW/cm²

3. Irradiance resolution：0.1mW/cm²

4. Energy measuring range：0-999999mJ/cm²

5. Energy measuring accuracy：±10%，±5% (typical)

6. Sampling speed：2048 times/second

7. Irradiance data storage interval：32 times/second

8. Recording period：32 minutes

9. Power supply：4 AAA alkaline dry batteries

10. Display: 240*160 Dot matrix LCD

11. Dimension:：160mm*75mm*13mm(L*W*H)

12. Weight: 303 g

III. Spectral response curve

Shenzhen Linshang Technology Co., Ltd.

2019-7-25 Page 3 of 9

IV.Characteristics

1. It is the real smart UV energy meter with a large LCD to display.

2. It is equipped with a USB port, and the detailed record data can be read through pc software,

generating data curve and print out test reports.

3. Equipped with metal shell, high temperature resistant design can operate at 100℃for long time.

4. Equipped with large-capacity memory, which can record up to 60,000 pieces of power data.

5. The stored data will not be lost when the power is off and the last test data will be displayed

automatically when power is on; the test data can only be deleted manually.

6. It is with high accuracy, and has passed many tests of authoritative testing organizations and got

certificates.

7. It is with a built-in timer, and can record the UV curing time accurately.

V. Operation

1. Parameter setting

In OFF mode, long press the “POWER” button for 3s and enter into the setting mode:

A. Trigger mode: (Auto/Manual)

Short press “▲” or “▼” to select Auto/Manual

Select “Auto”- The auto trigger mode, the meter will start and stop automatically.

Select “Manual”- The measurement will start and stop manually.

Short press the “ENTER” button and enter into the next setting interface .IfAuto mode is selected, next

setting interface is trigger threshold value. If manual mode is selected, next setting interface is the smooth

process.

Note: For the recording time is only 32 minutes, if the production line is very long and need a long time to

reach the UV Lamp position, the “AUTO” mode must be selected.

B. Trigger threshold (Trigger power: 0.1-5.0mW/cm²can be set)

Short press “▲” or “▼”to set the trigger threshold.

Short press the “ENTER” button and enter into the smooth process.

C. Smooth Processing (Smooth: OFF/50HZ/60HZ)

If the UV lamp is powered with alternating current, the frequency of alternating current will influence the

accuracy of the irradiance measurement. Short press “▲” or “▼” to select the power supply frequency of

the light source.

Shenzhen Linshang Technology Co., Ltd.

2019-7-25 Page 4 of 9

OFF: This option can be selected if no smooth processing will be performed and the UV lamp is

powered with direct current

50HZ: This option must be selected if frequency of the alternating current is 50HZ

60HZ: This option must be selected if frequency the alternating current is 60HZ

Short press the “ENTER” button and enter into the “STOP” interface.

D. Factory default settings

Trigger mode: Manual

Smooth: 50HZ

2. ON/OFF

In OFF state, short press “POWER” button to power on the meter. Information such as version

number, serial number will be showed on the meter after powering on and enter into the last

measurement interface (STOP Interface).

In the STOP interface, long press the “POWER” button to power off the meter.

Shenzhen Linshang Technology Co., Ltd.

2019-7-25 Page 5 of 9

In the STOP interface, the meter will power off without any operation in 3 minutes.

In the state of “READY”, the longest waiting time is 50 minutes .If the measurement cannot be

triggered after 50 minutes, the meter will shut down automatically.

3. Measurement

In the measurement mode, three operation states exist:

READY: In the auto trigger mode, this means the meter is waiting for triggering to begin a measurement.

RUN: The meter is in the process of measurement.

STOP: The data measurement is over.

In measurement interface:

M: Manual Measurement Mode

A: Automatic measurement Mode

Manual Measurement：Short press the "POWER" button, Press "ENTER" to confirm the new

measurement and clear last measured data（show "-----"）and enters into the measurement state after

1 second (RUN state).Short press the “POWER” button or when the measurement time reaches 32

minutes, the measurement ends and enters into the STOP interface.

Automatic measurement：Press the button to start the new measurement then enter into the

“READY” state and clear last measured data,（show "-----" and flash）,When the power value is

greater than the set value of trigger power, the trigger condition is satisfied then enter into the

measurement state (RUN state) .If the recording time reaches 32 minutes or the power value is less

than the set value of trigger power, the measurement will be automatically ended and enters into the

STOP interface.

4. The last measurement data view

In the stop status, the interface displays measurement result energy E, maximum power value PMAX,

power value P, and measurement time.

Shenzhen Linshang Technology Co., Ltd.

2019-7-25 Page 6 of 9

short press the "ENTER" button to toggle between the measurement result and power curve.

In the stop status, long press the "ENTER" key to clear the current test data.

5. Low Power Alarm

When the battery power is low, the battery symbol " " on the bottom right of the screen will flash,

indicating that the battery needs to be replaced.

VI.PC software instruction

In the STOP interface (other interfaces cannot be connected to the PC software), plug in the USB cable,

open "UV Energy meter Vx.x" software then the meter can be connected to the computer for you to read

the data .The software has various functions, such as parameter configuration, data reading, UV

irradiance curve, report printing and power data saving to EXCEL.

Shenzhen Linshang Technology Co., Ltd.

2019-7-25 Page 7 of 9

The report generation and printing function should be specially explained. For test data, the software can

generate a report automatically and print, and if a PDF printer is installed, the electronic version report

can be printed in PDF format. This is convenient for the recording and archiving of test data.

Record data can be read by connecting USB cable with computer directly (when the meter is connected

to the computer USB port for the first time, the computer needs to be restarted so as to load the driver

automatically). Currently, the software supports Windows operating system.

Shenzhen Linshang Technology Co., Ltd.

2019-7-25 Page 8 of 9

VII. Precautions

1. The meter sensor needs to be facing towards the UV light source.

2. When not in use, please turn off the meter.

3. Avoid contact with corrosive materials and keep away from high humidity.

4. Please put it in the plastic case after power-off and keep properly.

5. The suggested calibrating period is one year, and our company has the standard light source and

provides calibration service. (The previous calibration time “Cal date: year/month/day” will be

displayed on the boot screen.)

6. For the UV sensor is very sensitive to humidity, the storage environment is very important. For long

time storage, please be sure to keep the meter in dry environment.

VIII. Standard packing list

No.

Description

Quantity

Unit

UV Energy Meter

pcs

USB cable

pcs

Software USB flash disk

pcs

AAA battery

pcs

Small cross screwdriver

pcs

User Manual

pcs

Certificate/Warranty card

pcs

Plastic Case

pcs

IX.Service

1. The meter has one-year warranty. If the meter works abnormally, please send the whole set of meter

to our company for maintenance.

2. Provide users with spare parts and lifelong maintenance services.

3. Provide the users with the meter calibration service.

4. Free technical support for long term.

Shenzhen Linshang Technology Co., Ltd.

2019-7-25 Page 9 of 9

Manufacturer: Shenzhen Linshang Technology Co., Ltd.

Website: www.linshangtech.com

Service hotline: +86-755-86263411

Email: sales@linshangtech.com

Table des matières

Autres manuels LINSHANG Instrument de mesure

LINSHANG

LINSHANG LS126C Manuel utilisateur

LINSHANG

LINSHANG LS197 Manuel utilisateur

LINSHANG

LINSHANG LS170 Manuel utilisateur

LINSHANG

LINSHANG LS213 Manuel utilisateur

LINSHANG

LINSHANG LS123 Manuel utilisateur

LINSHANG

LINSHANG LS201 Manuel utilisateur

LINSHANG

LINSHANG LS101 Manuel utilisateur

LINSHANG

LINSHANG LS133 Manuel utilisateur

LINSHANG

LINSHANG LS212 Manuel utilisateur

LINSHANG

LINSHANG LS232 Manuel utilisateur

LINSHANG

LINSHANG LS132 Manuel utilisateur

LINSHANG

LINSHANG LS136 Manuel utilisateur

LINSHANG

LINSHANG LS200 Manuel utilisateur

LINSHANG

LINSHANG LS182 Manuel utilisateur

LINSHANG

LINSHANG LS220B Manuel utilisateur

LINSHANG

LINSHANG LS128 Manuel utilisateur

LINSHANG

LINSHANG LS110 Manuel utilisateur

LINSHANG

LINSHANG LS126A Manuel utilisateur

LINSHANG

LINSHANG LS192 Manuel utilisateur

LINSHANG

LINSHANG LS196 Manuel utilisateur

LINSHANG

LINSHANG LS120 Manuel utilisateur

LINSHANG

LINSHANG LS163 Manuel utilisateur

LINSHANG

LINSHANG LS300 Manuel utilisateur

LINSHANG

LINSHANG LS193 Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur