Linksys WRT54GL - Wireless-G Broadband Router... Guide de démarrage rapide

Firmware Upgrade Procedures:

Linksys WRT54GL v1

fw ddwrt_v24_sp1_std_generic_10011

1. General Information

Make: Linksys

Model: WRT54GL

Hardware Version: any

Firmware Version: ddwrt_v24_sp1_std_generic_10011

MAC Address Info:

WLAN MAC: two higher than LAN MAC.

LAN MAC: labeled on the bottom of the device.

WAN MAC: one higher than LAN MAC.

Example: if the LAN MAC printed on the device is 00:11:DE:AD:BE:EF, then

the WAN MAC is 00:11:DE:AD:BE:F0 and the WLAN MAC is

00:11:DE:AD:BE:F1.

Defaults Settings/Configuration:

Default LAN IP Address: 192.168.1.1

Web Interface Username: root

Default Web Interface Password: admin

IMPORTANT: These instructions assume that the device is already running a stock

ddwrt_v24_sp1_std_generic_10011 firmware. Do not upgrade the device to the ddwrt

firmware if it is running the original Linksys manufacturer’s firmware; instead, see the

ddwrt website for instructions on how to convert the device to run the ddwrt firmware

(you must first upgrade to a “mini” ddwrt firmware).

2. Wired Upgrade Procedure

Prerequisites:

•client computer with ethernet interface and firmware file

•ethernet cable

•device LAN IP address (referred to below as <Device_LAN_IP_Address>)

•device web interface password

Limitations: if the device is running a CB firmware, under certain situations you may

need to reference the CB User’s Manual to perform a firmware upgrade.

Firmware Filename: dd-wrt.v24_std_generic_[X].bin (where [X] is an optional

string)

Instructions:

•Connect a wired (ethernet) client with DHCP enabled to a LAN port on the device

with an ethernet cable. If you are not served an IP address by the device, you will

need to determine the device LAN IP address (see next step) and manually assign

the wired client an IP address in the same subnet as the device LAN IP address.

For example, if the device LAN IP address is 192.168.1.1, assign yourself an IP

address of 192.168.1.11.

•Determine the <Device_LAN_IP_Address>. If the device is running DHCP, the

device LAN IP address is likely the default gateway of your connected client;

otherwise, if the device LAN IP address is not the default LAN IP address listed

above, the device LAN IP address can be retrieved in wireless sniffer capture data

(e.g., kismet).

•Log on to the device’s web interface by opening a web browser and pointing it to

http://<Device_LAN_IP_Address>, where “<Device_LAN_IP_Address>” is the

device IP address determined from the previous step (i.e., not the literal string

“<Device_LAN_IP_Address>”). For example, if the <Device_LAN_IP_Address>

is 192.168.1.1, use http://192.168.1.1.

•At the login prompt, enter the web interface password and click OK.

•Then click the “Administration” link on the upper right tab.

•Then click the “Firmware Upgrade” tab.

•Click the “Browse…” button and browse to the dd-wrt.v24_std_generic_[X].bin

firmware file on the client computer.

•Click the “Upgrade” button.

•Watch the interface for any additional steps/error messages/information.

Reboots Automatically After Upgrade: Yes

Approximate Upgrade Time: 130 seconds

Known Issues: None

3. Wireless Upgrade Procedure

Prerequisites:

•client computer with 802.11 wireless client card (or built-in 802.11 client

hardware).

•wireless encryption (WEP, WPA, or WPA2) key (if wireless security is enabled)

•device LAN IP address (referred to below as <Device_LAN_IP_Address>)

•device web interface password

Limitations: None

Firmware Filename: dd-wrt.v24_std_generic_[X].bin (where [X] is an optional string)

Instructions:

•Connect/associate the wireless (802.11) client computer (with DHCP enabled) to

the device. If wireless encryption (WEP, WPA, or WPA2) is enabled on the

device, enter the key when prompted. If you are not served an IP address by the

device, you will need to determine the device LAN IP address (see next step) and

manually assign the wired client an IP address in the same subnet as the device

LAN IP address. For example, if the device LAN IP address is 192.168.1.1,

assign yourself an IP address of 192.168.1.11.

•Determine the <Device_LAN_IP_Address>. If the device is running DHCP, the

device LAN IP address is likely the default gateway of your connected client;

otherwise, if the device LAN IP address is not the default LAN IP address listed

above, the device LAN IP address can be retrieved in wireless sniffer capture data

(e.g., kismet).

•Log on to the device’s web interface by opening a web browser and pointing it to

http://<Device_LAN_IP_Address>, where “<Device_LAN_IP_Address>” is the

device IP address determined from the previous step (i.e., not the literal string

“<Device_LAN_IP_Address>”). For example, if the <Device_LAN_IP_Address>

is 192.168.1.1, use http://192.168.1.1.

•At the login prompt, enter the web interface password and click OK.

•Then click the “Administration” link on the upper right tab.

•Then click the “Firmware Upgrade” tab.

•Click the “Browse…” button and browse to the dd-wrt.v24_std_generic_[X].bin

firmware file on the client computer.

•Click the “Upgrade” button.

•Watch the interface for any additional steps/error messages/information.

Reboots Automatically After Upgrade: Yes

Approximate Upgrade Time: 130 seconds

Known Issues: None

Autres manuels pour WRT54GL - Wireless-G Broadband Router...

Table des matières

Autres manuels Linksys Routeur réseau

Linksys

Linksys WRT320N - Wireless-N Gigabit Router Wireless Manuel utilisateur

Linksys

Linksys RV082 Manuel utilisateur

Linksys

Linksys RVS4000 Manuel d'utilisation

Linksys

Linksys E2500 Manuel utilisateur

Linksys

Linksys MAX-STREAM EA7400 Manuel utilisateur

Linksys

Linksys WRT54GH Manuel utilisateur

Linksys

Linksys RV042 Manuel utilisateur

Linksys

Linksys WT54GV22 Manuel utilisateur

Linksys

Linksys MAX-STREAM Manuel utilisateur

Linksys

Linksys MAX-STREAM MR5500 Series Manuel utilisateur

Linksys

Linksys VELOP Manuel utilisateur

Linksys

Linksys E900 Manuel utilisateur

Linksys

Linksys LRT214 Manuel utilisateur

Linksys

Linksys NR041 Instructions d'utilisation d'origine

Linksys

Linksys MAX-STREAM EA7500 Manuel utilisateur

Linksys

Linksys MAX-STREAM EA8100 V2 Manuel du propriétaire

Linksys

Linksys EG0801SK - EtherFast Network Starter Manuel utilisateur

Linksys

Linksys CM100 - Cable Modem With USB Manuel d'utilisation

Linksys

Linksys Instant PowerLine PLEBR10 Manuel utilisateur

Linksys

Linksys BEFSR11 - EtherFast Cable/DSL Router Mode d’emploi

Linksys

Linksys EA6500 Manuel utilisateur

Linksys

Linksys RV016 Manuel d'utilisation

Linksys

Linksys WRT54GL - Wireless-G Broadband Router... Manuel utilisateur

Linksys

Linksys Instant Broadband Series Manuel utilisateur

Manuels Routeur réseau populaires d'autres marques

Allnet

Allnet ALL0333AU Manuel utilisateur

HomeSeer

HomeSeer HT-SEL Manuel utilisateur

Sercomm

Sercomm Genesis OC3505D Manuel utilisateur

Billion

Billion BIPAC 5102 Series Manuel utilisateur

TP-Link

TP-Link TD-8817 Manuel utilisateur

Motorola

Motorola MR1900 Manuel utilisateur

Digi

Digi IX14 Manuel utilisateur

Cisco

Cisco NCS 540 Manuel

XAVi

XAVi X8821e Manuel utilisateur

BEC

BEC 6200WZL Manuel utilisateur

MikroTik

MikroTik hAP ac3 Series Manuel utilisateur

Korenix

Korenix JetNet 5428G Series Manuel utilisateur

NETGEAR

NETGEAR FS526T - Switch Manuel utilisateur

Korenix

Korenix JetNet 5710G Series Manuel utilisateur

Automated Logic

Automated Logic ZN551 Manuel du propriétaire

Cisco

Cisco ASR 1000 Series Manuel de l'opérateur

EnGenius

EnGenius ESR-9710 Manuel utilisateur

Cisco

Cisco 805 Series Instructions d'utilisation et de sécurité