Linksys WAG200G Manuel utilisateur

Model No.

Wireless Quick Installation Guide

Wireless

Quick Installation Guide

Model No.

WAG200G (EU)

ADSL Home Gateway

Wireless-G

Package Contents

• Wireless-G ADSL Home Gateway

• User Guide on CD-ROM

• Ethernet Network Cable

• Phone Cable

• Power Adapter

• Microfilter or splitter (not supplied with

all models)

• Quick Installation

GHz

2802.11g

In Step 1, you will connect the

Gateway to your ADSL line and to

the computers in your home or

business.

First, make sure that all the devices

that you’ll be working with are

powered down, including your PCs

and the Gateway.

AConnect one end of the

provided phone cable to the

wall jack with ADSL service.

NOTE: To avoid interference,

you may need to place

a microfilter or splitter

between the phone

cable and wall jack.

Contact your service

provider for more

information. (If you use

ISDN, then you do not

need a microfilter.)

BConnect the other end of the

phone cable to the LINE port

that is on the back of the

Gateway. (Figure B)

CConnect one end of the

provided Ethernet cable to

your PC’s Ethernet adapter

(Figure C1). Connect the other

end of the cable to one of the

Ethernet ports on the back of

the Gateway (Figure C2).

Connect the ADSL Home Gateway

Repeat this process for every

PC that you want to connect to

the Gateway.

If you are connecting more

than four PCs to the Gateway,

you will also need to connect

a hub or switch to the

Gateway.

NOTE: If your PC’s Ethernet

adapter is not set up,

refer to the Ethernet

adapter’s user guide for

more information.

DConnect the power adapter to

the Gateway. Connect the

power adapter to the electrical

outlet. (Figure D)

ETurn on the Gateway. Then,

turn on the first PC that you

want to use to configure the

Gateway.

Proceed to Step 2: Configure the

ADSL Home Gateway.

IMPORTANT: Make sure you only

place the microfilter or splitter

between the phone and the wall

jack and not between the Gateway

and the wall jack. Otherwise your

ADSL will not connect.

In Step 2, you will configure your

Linksys Wireless-G ADSL Home

Gateway to be able to gain access

to the Internet through your Internet

Service Provider (ISP). You will need

the setup information provided by

your ADSL ISP. If you do not have this

information, please contact them

before proceeding.

The instructions from your ISP tell you

how to set up your PC for Internet

access. Because you are now using

the Gateway to share Internet

access among several computers,

you will use the setup information to

configure the Gateway instead of

your PC.

NOTE: You only need to

configure the Gateway

once using the first

computer you set up.

AOpen your web browser. (You

may get an error message at

this point. Continue following

these directions.) Enter

http://192.168.1.1 in the web

browser’s Address field. Press

the Enter key.

BAn Enter Network Password

window, shown in Figure B, will

appear (Windows XP users will

see a Connect to 192.168.1.1

window). Enter admin in

lowercase letters in the User

Name field, and enter admin

Configure the ADSL Home Gateway

in lowercase letters in the

Password field (admin is the

default user name and

password.) Then, click the OK

button.

CThe Basic Setup screen will

appear with the Setup tab

selected. (Figure C) Based on

the setup instructions from your

ISP, you may need to provide

the following information.

Virtual Circuit (VPI and VCI):

These fields consist of two

items: VPI (Virtual Path Identifier)

and VCI (Virtual Channel

Identifier). Your ISP will provide

the correct settings for each

field.

DEncapsulation: This Gateway

supports multiple settings for

the Encapsulation. The most

common Encapsulation

methods are described below.

All methods are included in the

User Guide (English only) on the

CD-ROM.

The settings required will

depend on the Encapsulation

chosen here. Your ISP will

provide the correct settings.

Dynamic

1 RFC 1483 Bridged

Dynamic IP Address

If your ISP says that you are

connecting through a dynamic IP

address (Figure D1), perform these

steps:

aSelect RFC 1483 Bridged for

the Encapsulation.

bSelect Obtain an IP Address

Automatically for the IP Set-

ting.

cClick the Save Settings button

to save the settings.

Static IP Address

If your ISP says that you are

connecting through a static or fixed

IP address (Figure D2), perform these

steps:

aSelect RFC 1483 Bridged for

the Encapsulation.

bSelect Use the following IP

Address as the IP Setting.

cEnter the IP Address and the

Subnet Mask.

dEnter the Default Gateway

address.

Static

PPPoE

PPPoA

eEnter the DNS in the Primary

and/or Secondary fields. You

need to enter at least one DNS

address.

fClick the Save Settings button

to save the settings.

2 RFC 2516 PPPoE or RFC 2364

PPPoA

If your ISP says that you are

connecting through PPPoE (Figure

D3) or PPPoA (Figure D4), or if you

normally enter a user name and

password to access the Internet,

perform these steps:

aSelect PPPoE or PPPoA as

appropriate for the

Encapsulation.

bIf you selected PPPoE, enter

the Service Name (if required).

cEnter the User Name.

dEnter the Password.

eSelect Keep Alive if you always

want to be connected to your

ISP, or select Connect on

Demand if you are charged

for the time that you are

connected to your ISP.

fClick the Save Settings button

to save the settings.

EIf you haven’t already done so,

click the Save Settings button

to save your Setup settings.

Close the web browser.

FFor Wireless Configuration:

Refer to the User Guide (English

only) for detailed instructions

on how to configure your

Gateway for your wireless

network. Linksys recommends

changing your wireless settings

from the defaults and enabling

the appropriate security

options.

GCongratulations! You’ve

successfully configured the

Gateway. Test the setup by

opening your web browser

from any computer and

entering:

www.linksys.com/registration

HIf you are unable to reach our

website, you may want to

review the installation and

configuration sections in this

Quick Installation or refer to the

Troubleshooting section of the

User Guide.

WAG200G-EU-QIG-60311NC TE

Linksys is a registered trademark or trademark of

Cisco Systems, Inc. and/or its affiliates in the U.S.

For additional information or troubleshooting

help, refer to the User Guide on the CD-ROM

or the Technical Support Insert. You can also

e-mail for further support.

Website

http://www.linksys.com/international

Product Registration

http://www.linksys.com/registration

IMPORTANT: Once the Gateway is

configured, wireless security,

either WEP or WPA, should be

configured to prevent security

breaches in your network.

Modelnr.

Trådløs Installationsvejledning

Wireless

Installationsvejledning

Modelnr.

WAG200G (DK)

ADSL-gateway til hjemmet

Trådløs-G

Pakkens indhold

• Trådløs-G ADSL-gateway til hjemmet

• Brugervejledning på cd-rom

• Ethernet-kabel

• Telefonledning

• Strømforsyning

• Mikrofilter eller fordeler (følger ikke

med alle modeller)

• Installationsvejledning

GHz

2802.11g

I trin 1 tilslutter du gatewayen til

ADSL-linjen og til computerne i dit

hjem/din virksomhed.

Kontroller først, at alle de involverede

enheder er slukket, herunder dine

pc'er og gatewayen.

ATilslut den ene ende af den

medfølgende telefonledning til

ADSL-vægstikket.

BEMÆRK: Det kan være

nødvendigt at placere

et mikrofilter eller en

fordeler mellem

telefonledningen og

vægstikket for at undgå

interferens. Kontakt din

tjenesteudbyder for at

få yderligere

oplysninger.

BTilslut den anden ende af

telefonledningen til LINE-porten

bag på gatewayen. (Figur B)

CTilslut den ene ende af det

medfølgende Ethernet-kabel til

pc'ens Ethernet-adapter

(Figur C1). Tilslut den anden

ende af kablet til en af Ethernet-

portene bag på gatewayen

(Figur C2). Gentag denne

fremgangsmåde for alle de

pc'er, du vil tilslutte til

gatewayen.

Tilslutning af ADSL-gatewayen

Autres manuels pour WAG200G

Table des matières

Autres manuels Linksys Porte

Linksys

Linksys SPA8000 Instructions d'utilisation d'origine

Linksys

Linksys VoIP Manuel utilisateur

Linksys

Linksys SPA400 Manuel d'utilisation

Linksys

Linksys WAG354G (EU) Manuel utilisateur

Linksys

Linksys AG241 Manuel utilisateur

Linksys

Linksys AG241 Manuel utilisateur

Linksys

Linksys WCG200 - Wireless-G Cable Gateway Wireless... Instructions d'utilisation d'origine

Linksys

Linksys SPA8000 Manuel d'utilisation

Linksys

Linksys HG200 Manuel utilisateur

Linksys

Linksys WAG200G Manuel utilisateur

Linksys

Linksys Linksys WAG54GX2 Manuel utilisateur

Linksys

Linksys SPA3102 Manuel utilisateur

Linksys

Linksys Wireless-N ADSL2+ Gateway WAG160N Manuel utilisateur

Linksys

Linksys WPG11 Manuel utilisateur

Linksys

Linksys WAG54GP2 Manuel utilisateur

Linksys

Linksys SPA3102 Instructions d'utilisation d'origine

Linksys

Linksys WCG200 - Wireless-G Cable Gateway Wireless... Manuel utilisateur

Linksys

Linksys WAG354G (EU) Manuel utilisateur

Linksys

Linksys WPG11 Manuel utilisateur

Linksys

Linksys WAG325N Manuel utilisateur

Linksys

Linksys WAG54G - Wireless-G ADSL Gateway Wireless... Manuel utilisateur

Linksys

Linksys SPA400 Manuel utilisateur

Linksys

Linksys AG300 Manuel utilisateur

Linksys

Linksys WAG54G - Wireless-G ADSL Gateway Wireless... Instructions d'utilisation d'origine

Manuels Porte populaires d'autres marques

LST

LST M500RFE-AS Manuel utilisateur

Kinnex

Kinnex Media Gateway Manuel utilisateur

2N Telekomunikace

2N Telekomunikace 2N StarGate Manuel utilisateur

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Manuel utilisateur

Telsey

Telsey CPVA 500 - SIP Manuel utilisateur

RTA

RTA 460A-NNA4 Fiche technique

Shaw

Shaw Gateway HDPVR Manuel utilisateur

ABB

ABB VSN900 Guide de démarrage rapide

Commander

Commander Pulse Manuel utilisateur

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Manuel utilisateur

NETGEAR

NETGEAR C6300BD Manuel utilisateur

Amit

Amit CDW531AM Manuel utilisateur

HMS

HMS Netbiter EasyConnect EC150 Manuel utilisateur

Huawei

Huawei EchoLife HG620 Manuel utilisateur

AT&T

AT&T U-verse 3801 Manuel d'utilisation et d'entretien

Logic IO

Logic IO RTCU MX2 turbo Manuel utilisateur

Suttle

Suttle MediaMAX MXM-521 Manuel utilisateur