Lexmark X463 Manuel utilisateur

How to Reset the Photoconductor Page Count on the

Lexmark X463, X464, & X466 Multifunction Printers

Step Action

After installing the new pc unit and restarting the machine, leave the printer powered on and open

its front cover.

2With the front cover open, press and hold the stop/cancel ( ) button.

3Watch the LCD screen. When you see the message "Resetting PC Counter", let go of the button.

Close the front cover.

Note: If you wish to confirm that the photoconductor page count has reset, print a menu settings

page.

1. ) button to enter the printerWith the printer at the Ready state, press the Menu (

menus.

2. Press Reports.

3. Press Menu Settings Page.

On the menu settings page(s), look for an entry called PC Kit. If the counter has been reset

correctly, the PC Kit should read Ok.

Error messages

A Photoconductor (PC) Life Warning or an 84 – PC Kit life message indicates that the photoconductor unit is

nearing the end of its functional life and should be replaced soon. The recommended action is to replace the

button to clear this message and

photoconductor unit or have an extra one in stock. You can press the

continue printing.

A Photoconductor Exhausted or an 84 – Replace PC Kit message indicates that the photoconductor unit has

run through its functional life. At this point, you must replace the photoconductor unit and reset the

photoconductor page count to clear this message. IMPORTANT! The printer will stop working once this message

appears. You cannot clear it without replacing the photoconductor unit and resetting the photoconductor page

count.

Alternate method

If pressing the stop/cancel ( ) button does not reset the photoconductor page count, follow the steps below to

enter the printer's Configuration menu and reset the counter there.

Step Action

1Power off the printer.

2With the printer off, press and hold the buttons 2 and 6.

3Power on the printer while keeping these buttons pressed down. Let go of the buttons

after ten seconds.

4After successfully accessing the Configuration menu, press Reset PC Cnt, and then

press Yes.

5After reset, press Exit Config Menu.

If the photoconductor warning messages continue to appear, please contact Lexmark

Technical Support or your next level of support for additional assistance.

Autres manuels pour X463

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Lexmark Imprimante tout-en-un

Lexmark

Lexmark X651DE Manuel utilisateur

Lexmark

Lexmark 5200 Series Manuel utilisateur

Lexmark

Lexmark Impact S305 Manuel utilisateur

Lexmark

Lexmark CX522 Manuel utilisateur

Lexmark

Lexmark 16A0867 - OptraImage 725 Mode d’emploi

Lexmark

Lexmark X74 Instructions d'utilisation

Lexmark

Lexmark 464de - X B/W Laser Manuel utilisateur

Lexmark

Lexmark MX510 Series Fiche technique

Lexmark

Lexmark OptraImage 433 Manuel utilisateur

Lexmark

Lexmark X950 Series Manuel utilisateur

Lexmark

Lexmark GENESIS S815 Manuel utilisateur

Lexmark

Lexmark CX725 Series Manuel utilisateur

Lexmark

Lexmark 544n - X Color Laser Manuel utilisateur

Lexmark

Lexmark X6150 Dimensions

Lexmark

Lexmark X950 Series Manuel d'utilisation

Lexmark

Lexmark MX310 Series Manuel utilisateur

Lexmark

Lexmark CX410 series Manuel

Lexmark

Lexmark 2200 Series Manuel

Lexmark

Lexmark CX410 series Manuel utilisateur

Lexmark

Lexmark CX310 series Manuel utilisateur

Lexmark

Lexmark X6100 Manuel utilisateur

Lexmark

Lexmark CX410 series Manuel utilisateur

Lexmark

Lexmark X63 Manuel utilisateur

Lexmark

Lexmark X940E Manuel utilisateur

Manuels Imprimante tout-en-un populaires d'autres marques

Triumph Adler

Triumph Adler DC 2016 Manuel

Epson

Epson WorkForce WF-2510 Guide de l'utilisateur

Epson

Epson Stylus Scan 2000 Manuel d'installation et d'exploitation

Epson

Epson PictureMate Snap PM 240 Mode d’emploi

Konica Minolta

Konica Minolta bizhub C35 Manuel utilisateur

Brother

Brother MFC-J430w Manuel utilisateur

Konica Minolta

Konica Minolta BIZHUB 558 Manuel utilisateur

Brother

Brother MFC-9760 Manuel utilisateur

Sharp

Sharp MX-2310U Mode d’emploi

Aficio

Aficio 200 Manuel utilisateur

Canon

Canon ImageCLASS 2300 Manuel

Ricoh

Ricoh Pro C900 Manuel utilisateur

Brother

Brother Business Smart MFC-J4510dw Manuel utilisateur

Epson

Epson Stylus CX8400 Series Manuel utilisateur

Oce

Oce VarioLink 5022 Manuel utilisateur

Copystar

Copystar CS 4551ci Manuel utilisateur

Konica Minolta

Konica Minolta Magicolor 4650EN Manuel utilisateur

Brother

Brother MFC-9840CDW Manuel utilisateur