LevelOne KVM-0306 Manuel utilisateur

LevelOne

KVM-0306

3-Port DVI KVM Switch

with Audio

User Manual

Bedienerhandbuch

Version 1.0-0605

ENGLISH

1. Introduction

Thank you for purchasing LevelOne KVM-0306. You now have a high quality,

durable system that will enable you to control 3 host computers and/or servers by

using PS/2 and/or USB Connectors from one console (PS/2 & USB Mouse, PS/2 &

USB Keyboard, and Monitor).

1.1 Features

1. Console your Keyboard/Mouse via either way of PS/2 and/or USB arbitrarily.

2. Controls 3 DVI computers from a single console (Keyboard/Mouse) over USB

and/or PS/2 connections.

3. Speaker enabled.

4. Microphone enabled.

5. Supports Windows, Linux, Mac OS9/OSX, Sun Microsystems.

6. Emulates a keyboard on each PC to allow your computers to boot normally

without keyboard error.

7. Supports hot-swap. All devices connected to the KVM can be added or

removed at any time, without shutting the unit down.

8. Supports 2 types of switching: (1) Hardware Push Button, (2) Hot-Keys on

PS/2 and/or USB keyboard.

9. Supports Auto-Scan function to switch video automatically among computers in

preset intervals sequentially.

10. Supports LED display for PC status monitoring.

11. Supports DVI UXGA resolutions up to 1600 x 1200 @ 60HZ.

12. Supports Beeper during switching enabled.

13. Self powered through USB connection.

14. Fully compliant with the USB 1.1/ 2.0 specification.

1.2 Physical Diagram

1.3 Package Contents

The product you purchased should contain the following equipment and accessories:

1. KVM-0306

2. User Manual

3. Three sets of cables (DVI + USB/Audio)

Selected LED On-Line LED Push Button

Microphone / Speaker DVI Port USB Connector

Reset

2. Specifications

2.1 General: Specification

Number Of Computers Controlled 3

Selection Method Push Button and Hot-Key (PS/2 and/or USB Keyboar

LEDs Red for PC Selection

Green for PC Power On

Video 3 x DVI UXGA female

USB 3 x USB - B type female

Speaker 3 x audio female jack

PC Connectors

Microphone 3 x audio female jack

Keyboard 1 x 6 pin mini-DIN female

Mouse 1 x 6 pin mini-DIN female

Video 1 x DVI UXGA female

Keyboard 1 x USB - A type female

Mouse 1 x USB - A type female

Speaker 1 x audio female jack

Console Ports

Microphone 1 x audio female jack

Auto-Scan Interval From 5 to 250 Seconds

DDC, DDC2 DVI UXGA monitor Up to resolution: 1600 x 1200

Hot Swappable Yes

Operating systems supported Windows 98SE/ME/2000/XP/2003 Server, Linux

Mac OS9/OSX and Sun Microsystems

Device driver No Need

Power By PS/2 and/or USB

Cable Length 6 feet (1.80 Meter)

Dimensions (L X W X H) 21.5 x 8.8 x 4.5 cm (5.5 X 3 X 1.7 inches)

Unit Weight 650 g

Housing material Metal

Operating Temperature 32~ 122°F (0~ 50°C )

Humidity 0%~80%RH

2.2 LED indicator:

Selected : RED LED indicates that the KVM Switch is selected to the corresponding

PC.

On-Line : GREEN LED indicates that the PC on corresponding port is connected

and powered on.

3. Installing KVM-0306

3.1 System Requirements:

1.Console

DVI monitor capable of the highest resolution.

PS/2 and/or USB Keyboard/Mouse

2.Computer or Server

The following equipment must be equipped with each computer or server.

- Type A USB port.

- DVI connector.

3.Cables

KVM-0306 uses separate (DVI + USB/Audio) cables.

3.2 Hardware Installation:

1. Make sure that the USB port of host PC is enabled and working properly.

2. Connect the USB cable Type-A end to the USB port of host PC, and the USB

cable Type-B end to the any available upstream on KVM-0306.

3. Connect the DVI male-to-female cable between the DVI port of host PC and DVI

port that corresponds to the USB port you selected in step 2.

4. Repeat steps 1-3 for any other computers you are connecting up and up to 3

computers can be connected at the same time.

Precaution:

1. The KVM switch does not support the USB keyboard which has built-in USB

HUB.

2. If your keyboard and mouse connected on KVM-0306 could not work at the

Windows login screen, it may be caused because the HID driver has not been

installed, please follow these steps to solve this problem:

a. Shut down the host PC.

b. Connect keyboard to the PS/2 port on host PC and turn on the PC.

c. Log in Windows system, and it will install the HID driver.

d. You can remove the keyboard and KVM-0306 should work properly.

4. Operating KVM-0306

KVM-0306 has the ability to switch the keyboard, video, mouse simultaneously. It

supports 2 methods to switch between computers: hardware push button and

Hot-Key commands.

Note: When using the two-step Hot Key sequences, the keys must be pressed within

5 seconds; otherwise the Hot Key action will be terminated.

4.1 Manual switch by push button:

You can switch to any other available active USB host connection by simply push the

appropriate switch button on KVM-0306. The LED will be lit to indicate which port is

currently selected.

4.2 Hotkey Selection (USB and/or PS/2 keyboard)

4.2.0 Instead hotkey Selection

If your keyboard is without < Scroll Lock > button, please press < Caps Lock > or

<Num Lock > instead of Scroll Lock.

Hot Key:

[Ctrl] →[Ctrl] →[Caps Lock] →[Enter] : The hotkey changed to [Caps Lock]

[Ctrl] →[Ctrl] →[Num Lock] →[Enter] : The hotkey changed to [Num Lock]

[Ctrl] →[Ctrl] →[Scroll Lock]→[Enter] : The hotkey reversed to [Scroll Lock]

Note : The default hotkey setting is <Scroll Lock> button as if you change the hotkey

default setting, the new setting will effect on the KVM switch until power off or

reset.

4.2.1 PCs Selection

Hot Key:

[Scroll] →[Scroll] →[ 1 ] →[Enter] or

[Scroll] →[Scroll] →[ 2 ] →[Enter] or

[Scroll] →[Scroll] →[ 3 ] →[Enter]

You can synchronize the PC selection, by using the following two-step Hot Key

sequence. To send commands to the DVI KVM Switch, press the [Scroll] key twice

(Step 1), then press key [1] or [2] or [3] and [Enter] (step 2) to assign the PC to a

particular PC. (If you press key [1] or [2] or [3] on the number pad, the keyboard,

mouse & video will also be switched synchronously)

4.2.2 Auto-Scan Function

Hot Key:

[Scroll] →[Scroll] →[S] →[Enter] to BEGIN.

[Scroll] →[Scroll] →[S], →[Enter] to STOP.

You can activate the Auto-Scan function by using the following two-step Hot Key

sequence. To send commands to the DVI KVM Switch, press the [Scroll] key twice

(Step 1), then press [S] and then press [Enter] (Step 2). When you press the

Auto-Scan hot key sequence, the DVI KVM Switch alternates between the three PCs

and displays them on the monitor.

Each PC is display one of time interval from 5 ~ 250 seconds (The interval is

adjustable) before switching to the next. When you press theAuto-Scan Hot Key

sequence again, the Auto-Scan will stop and the monitor screen will jump back to the

original PC.

Adjustable scan time interval setting ( 5 ~ 250 sec. )

Hot-key: Pressing the <Scroll >, <Scroll > then <S> and <10 ~250 > <Enter>

4.2.3 Beeper Enable

Hot Key:

[Scroll] →[Scroll] →[B] →[Enter] to Disable

[Scroll] →[Scroll] →[B] →[Enter] to Enable

The Speaker/Beeper’s default setting is “Enable”. While the switching connections

are activated and Speaker/Beeper is in “Enable” status, the beeper has a short

beeping sound.

4.3 Audio (Speaker + Microphone) Selection

4.3.1 (PC + Audio) Combination Selection

Hot Key:

[Scroll] →[Scroll] →[ F1 ]→[Enter] or

[Scroll] →[Scroll] →[ F2 ]→[Enter] or

[Scroll] →[Scroll] →[ F3 ]→[Enter]

4.3.2 Single Audio ( Speaker + Microphone ) Selection

Hot Key:

[Scroll] →[Scroll] →[A] →[Enter] to enable or disable the audio auto switch mode

[Scroll] →[Scroll] →[A] →[1]→[Enter] to select PC1 Speaker and Microphone

[Scroll] →[Scroll] →[A] →[2]→[Enter] to select PC2 Speaker and Microphone

[Scroll] →[Scroll] →[A] →[3]→[Enter] to select PC3 Speaker and Microphone

Note 1: Audio auto switch mode, the default setting of KVM switch is enabled,

means when you used the push button, the PCs and Audio will be

switched at the same time. In case of the Audio auto switch mode is

disabled, then the push button only switch PCs.

Note 2: One long sound – Audio auto switch disabled

Two short sound – Audio auto switch enabled

Hot Key definition table

Step 1 Step 2 Action

[Scroll] + [Scroll] [1] + [ Enter ] Switch the active connection to PC 1

[Scroll] + [Scroll] [2] + [ Enter ] Switch the active connection to PC 2

[Scroll] + [Scroll] [3] + [ Enter ] Switch the active connection to PC 3

[Scroll] + [Scroll] [A] + [ Enter ] Disable or enable the Audio auto switch mode

[Scroll] + [Scroll] [F1] + [ Enter ] Combined switching (PC+Audio) to PC 1

[Scroll] + [Scroll] [F2]+ [ Enter ] Combined switching (PC+Audio) to PC 2

[Scroll] + [Scroll] [F3] + [ Enter ] Combined switching (PC+Audio) to PC 3

[Scroll] + [Scroll] [A] + [1] + [ Enter ] Single switching the active audio to PC 1

[Scroll] + [Scroll] [A] + [2] + [ Enter ] Single switching the active audio to PC 2

[Scroll] + [Scroll] [A] + [3] + [ Enter ] Single switching the active audio to PC 3

[Scroll] + [Scroll] [B] + [ Enter ] Disable or enable beeper

[Scroll] + [Scroll] [S] + [Enter] Activate the Auto-Scan mode, default 5 sec.

[Scroll] + [Scroll] [S] + [5 -250 ] +

[ Enter ] Select the Auto-Scan interval from 5 to 250 Sec.

Table des matières

Langues :

Autres manuels LevelOne Changer

LevelOne

LevelOne GTL-2690 Manuel utilisateur

LevelOne

LevelOne FGS-2800 Manuel utilisateur

LevelOne

LevelOne GEP-2821 Manuel utilisateur

LevelOne

LevelOne GSW-2493 Manuel utilisateur

LevelOne

LevelOne GES-2451 Manuel utilisateur

LevelOne

LevelOne OfficeCon FSW-2420TX Manuel utilisateur

LevelOne

LevelOne Infinity IES-1085 Manuel utilisateur

LevelOne

LevelOne GSW-0503T Manuel utilisateur

LevelOne

LevelOne FGP-1031 Manuel utilisateur

LevelOne

LevelOne FSW-0513 Manuel utilisateur

LevelOne

LevelOne KVM-0290 Manuel utilisateur

LevelOne

LevelOne FEP-1601 Manuel utilisateur

LevelOne

LevelOne Infinity IES-1081 Manuel utilisateur

LevelOne

LevelOne FSW-2106 Manuel utilisateur

LevelOne

LevelOne POH-1250 Manuel utilisateur

LevelOne

LevelOne FGL-2870 Manuel utilisateur

LevelOne

LevelOne ProCon GSW-2496 Manuel utilisateur

LevelOne

LevelOne GEU-2429 Manuel utilisateur

LevelOne

LevelOne GTL-2882 Manuel utilisateur

LevelOne

LevelOne FSW-0802TX Manuel utilisateur

LevelOne

LevelOne FEP-1601 Manuel utilisateur

LevelOne

LevelOne GEP-2681 Manuel utilisateur

LevelOne

LevelOne GSW-2490TXM Manuel utilisateur

LevelOne

LevelOne GEP-2450 Manuel utilisateur

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur