LevelOne HDSpider Series Manuel utilisateur

HDSpider™HDMI 1.3 over Single Cat.5 Distribution Series

HVE-9000

HVE-9001

HVE-9002

HVE-9003

HVE-9004

HVE-9008

HVE-9900

User Manual

Ver.:2.0-1003

p.2 Package Contents

p.3 Overview

p.4 Panel Description

p.14 Installation

p.20 Systematic Application Diagrams

p.21 Frequently Asked Questions

p.22 Specifications

p.25 Notice

p.26 Pin Definition

TABLE OF CONTENTS

HVE-9000 HDSpider™Long Range Cat.5 HDMI Receiver

1. HDSpider™Long Range Cat.5 HDMI Receiver (HVE-9000)

2. 5V 2A DC Power Supply Unit

3. User Manual

HVE-9001 HDSpider™Cat.5 HDMI Sender

1. HDSpider™Cat.5 HDMI Sender (HVE-9001)

2. 5V 2A DC Power Supply Unit

3. User Manual

HVE-9002 HDSpider™Cat.5 HDMI Sender with Local HDMI Output

1. HDSpider™Cat.5 HDMI Sender with Local HDMI Output (HVE-9002)

2. 5V 4A DC Power Supply Unit

3. User Manual

HVE-9003 HDSpider™Cat.5 Cascadable HDMI Sender

1. HDSpider™Cat.5 Cascadable HDMI Sender (HVE-9003)

2. 5V 4A DC Power Supply Unit

3. User Manual

HVE-9004 HDSpider™4-Port Cat.5 HDMI Sender

1. 4-Port HDSpider™HDMI Cat.5 Sender (HVE-9004)

2. 5V 4A DC Power Supply Unit

3. User Manual

HVE-9008 HDSpider™8-Port Cat.5 HDMI Sender with Local HDMI Output

1. 8-Port HDSpider™HDMI Cat.5 Sender (HVE-9008)

2. 5V 4A DC Power Supply Unit

3. User Manual

HVE-9900 HDSpider™Short Range Cat.5 HDMI Receiver

1. HDSpider™Short Range Cat.5 HDMI Receiver (HVE-9900)

2. User Manual

PACKAGE CONTENTS

Introduction

The HDSpider™HDMI 1.3 over Single Cat.5 Distribution Series provides the most

flexible solution by which the uncompressed, unmodified, and pure digital HDMI

signals with 7.1-channel audio can be transmitted to different locations over a long

distance. The cascadability of HDSpider™ series is virtually unlimited, allowing you

to extend HDMI/DVI displays almost anywhere.

The whole HDSpider™series products can be easily inter-connected to suit almost every

application through Cat.5/5e/6 cables. By taking the advantage of Cat.5/5e/6 cables,

installation work becomes so easy and particularly cost effective wherever the distribution of

HDMI signals is required.

Features

The HDSpider™HDMI 1.3 over Single Cat.5 Distribution Series offers the users:

Silicon Image (founder of HDMI) chipset embedded

HDMI signal transmission via Cat.5/5e/6 cables

Cat.5/5e/6 cable implementation to minimize use of high-cost HDMI cable

Minimum 40m extension for 1080p resolution*

Maximum extension up to 80m**

Uncompressed, unmodified HDMI with 7.1-channel audio/video pure digital

transmission

Cascading virtually unlimited for HVE-9003

Compliant with HDMI 1.2 / 1.3

Build in 8-level signal level equalizer to fine tune video quality

EDID learning ability to read and store the EDID information of the display to

avoid any incompatibility among displays

Software not required, purely hardware installation. Virus risk free

Note: The length depends on the characteristics and quality of the cables. Higher resolutions

and longer transmission distances require low skew cables (<25ns/100m) for best performance.

*single link of HVE-9000. For connection with HVE-9900, 1080p distance at minimum 15m.

**single link at 480p resolution, with high quality, minimal delay skew Cat-6 cable

OVERVIEW

HVE-9000 HDSpider™Long Range Cat.5 HDMI Receiver

Input Panel

HDMI Signal IN: Connect to the HDMI Signal OUT port on the HVE-9001, HVE-9002, HVE-9004,

or HVE-9008 with a Cat.5e/6 cable.

+5V DC: Connect to 5V 2A DC power supply.

Output Panel

Signal Level: Adjust the 8-level signal equalization control to the received HDMI signals.

The HDMI signal level varies from 0 (strongest) to 7 (weakest) for respective

transmission length from longest possible range to short distance. Dial the Signal

Level from 7 to 0 and stop turning the rotary switch whenever the audio/video is

playing normally. Inappropriate signal level setting may cause overpowering issues

that would shorten the product’s life significantly!

HDMI OUT: Connect to a HDMI display with a HDMI male-male cable.

PANEL DESCRIPTION

HVE-9001 HDSpider™Cat.5 HDMI Sender

Output Panel

HDMI IN: Connect to a HDMI source with a HDMI male-male cable

Mode: 0 = HDMI mode with surround sound (up to 7.1ch) audio output

1 = HDMI mode with stereo (2ch) audio output

2 = DVI mode

3 ~ 5 = Not in use

6 = Use default EDID profile

7 = Learn the EDID from the display*

Note for EDID (Extended Display Identification Data) learning

1. Connect the display which you want to read EDID with a HDMI cable to HDMI-IN on

HVE-9001 and dial MODE to 7 so the HVE-9001 can learn the EDID information from the

connected display. The LED on the RJ-45 connector will dim and bright again in a few

seconds, which indicates the EDID learning process is complete.

2. Dial MODE clockwise [

] from 7 to 0 or 1 for desirable audio setting and enjoy the

experience. DO NOT let the rotary control arrow pass by 6. Doing so will erase the

EDID just learned and restore the default EDID profile.

Output Panel

+5V DC: Connect to 5V 2A DC power supply unit.

HDMI Signal OUT: Connect to the HDMI Signal IN of the HVE-9000 or HVE-9900 with a

Cat.5e/6 cable.

1 2 3 4 5 6 7

HVE-9002 HDSpider™Cat.5 HDMI Sender with Local HDMI Output

1. Input video format indicator [lights up for HDMI signal, lights off for DVI signal]

2. DIP switch [see table below]

3. HDMI IN: Connect a HDMI source with a HDMI male-male cable here

4. Audio OUT: Plug in a local speaker here

5. HDMI OUT: Local HDMI for connecting to a HDMI display with a HDMI male-male cable

here or cascade to the HDMI IN of another HVE-9001, HVE-9002, HVE-9004, or HVE-9008.

6. HDMI Signal OUT: Link to HVE-9003 for cascading; or link to HVE-9000 or HVE-9900 to

another HDMI display with a Cat.5e/6 cable

7. +5V DC: Connect to a 5V 4A DC power supply unit

DIP Switch

DIP Switch Position Video Audio Description

Pin-1 Pin-2

OFF [©]OFF [©]Up to

1080p Stereo1Default Mode2– 1080p & stereo audio output for

most HDTVs

OFF [©]ON [ª] 720p

1080i Stereo Safe Mode3– Enforce the system output at

720p/1080i video and stereo audio for basic

compatibility among HDTVs

ON [ª] OFF [©]Bypass4Bypass4EDID Learning Mode5– for learning EDID from the

display while playing any received HDMI audio

format

ON [ª] ON [ª]Bypass Stereo

EDID Learning & Stereo mode5– for learning EDID

from the display while enforcing stereo output if

any HDTV cannot play surround sound normally

Note for EDID (Extended Display Identification Data) learning

1.Don’t plug in HDMI cable to [HDMI In] when you want to restore default EDID or learn the

display’s EDID.

2.Please connect the display which you want to read EDID to HDMI OUT so the HVE-9002

can learn the EDID information from the connected HDTV.

3.To learn EDID from HDMI display, pull up-and-down the DIP switch 1 from OFF to ON, the

green light will dim and light to indicate the EDID learning process is complete. You

DON’T NEED to pull up the DIP switch again unless you want to learn another EDID by

pulling DIP switch 1 up and down.

Note

1If the HDTV shows video but without audio, please try to set audio mode to stereo.

2Factory default: Pin#1-OFF[©], Pin#2- OFF[©] for 1080p with stereo.

3If you encounter any unsolved audio/video output problem during system installation,

please turn to Safe Mode (Pin#1-OFF[©] & Pin#2-ON[ª]) to enforce the most compatible

720p stereo output for system check.

4Bypass means the matrix will maintain playing the original format of HDMI signals in video

and perhaps audio. By setting at this mode, the users may encounter compatibility issue

among different kinds of HDMI sources and displays. If you cannot get the audio and/or

video output normally at the system installation, please change the DIP switch setting to

default mode or even safe mode to verify the functionality of the device.

5Set Pin#1 at ON[ª]first then connect the HDMI Input to HDTV through a HDMI cable. Wait

for 20 seconds. The EDID learning procedure will be finished. If you want to learn the EDID

from another HDTV, you must set Pin#1 at OFF first and repeat this procedure.

1 2 3 4 567

HVE-9003 HDSpider™Cat.5 Cascadable HDMI Sender

1. Input video format indicator [lights up for HDMI signal, lights off for DVI signal]

2. Signal Level: Adjust the 16-level equalization control corresponding to the

transmission distance of receiving HDMI signals. For surround sound audio

output, please adjust from 0-to-7 (longest-to-shortest transmission length). For

stereo audio output, please adjust from 8-to-F (longest-to-shortest transmission

length). It is recommended to adjust from 7-to-0 or from F-to-8 to find the

optimal visual experience.

3. HDMI Signal IN: Link to HVE-9001,HVE-9002, HVE-9003, HVE-9004, or HVE-9008 with a

Cat.5e/6 cable

4. Audio OUT: Plug in a local speaker here

5. HDMI OUT: Local HDMI for connecting to a HDMI display with a HDMI male-male cable

here or cascade to the HDMI IN of another HVE-9001, HVE-9002, HVE-9004 or HVE-9008.

6. HDMI Signal OUT: Link to HVE-9003 for cascading; or link to HVE-9000 or HVE-9900 to

another HDMI display with a Cat.5e/6 cable

7. +5V DC: Connect to a 5V 4A DC power supply unit

HVE-9004 HDSpider™4-Port Cat.5 HDMI Sender

DIP Switch: Please see more detail in the table below

HDMI INPUT: Connect to a HDMI source

HDMI Signal OUTPUT 1 – 4: Link to each HDMI display via a Cat.5e/6 cable with HVE-9000,

HVE-9003, or HVE-9900.

USB: For firmware update (technical support use only)

+5V DC: interlocking power jack for 5V DC power supply unit

DIP Switch

DIP Switch Position Video Audio Description

Pin-1 Pin-2

OFF [©]OFF [©]Up to 1080p Stereo1Default Mode2– Up to 1080p & stereo audio

output for most HDTVs

OFF [©]ON [ª] Up to

720p/1080i Stereo1Safe Mode3– Enforce the system output at

720p/1080i video and stereo audio for basic

compatibility among HDTV

ON [ª] OFF [©]Bypass4Bypass4EDID Learning5Mode – for learning EDID from

the display while playing any received HDMI

audio format

ON [ª] ON [ª]Bypass4Stereo

EDID Learning5& Stereo Mode – for learning

EDID from the display while enforcing stereo

output if any HDTV cannot play surround sound

normally

Ce manuel convient aux modèles suivants

Autres manuels LevelOne Changer

LevelOne

LevelOne FGP-1031 Manuel utilisateur

LevelOne

LevelOne GEL-1061 Manuel utilisateur

LevelOne

LevelOne FSW-2410TX Manuel utilisateur

LevelOne

LevelOne GEL-2460 Manuel utilisateur

LevelOne

LevelOne FEU-0511 Manuel utilisateur

LevelOne

LevelOne ProCon GSW-1291 Manuel utilisateur

LevelOne

LevelOne KVM-0830 Manuel utilisateur

LevelOne

LevelOne GEL-2870 Manuel utilisateur

LevelOne

LevelOne GEP-5070 Manuel utilisateur

LevelOne

LevelOne KCM-0831 Manuel utilisateur

LevelOne

LevelOne GTP-5271 Manuel utilisateur

LevelOne

LevelOne ProCon GSW-1290 Manuel utilisateur

LevelOne

LevelOne FEP-0311 Manuel utilisateur

LevelOne

LevelOne GEL-1051 Manuel utilisateur

LevelOne

LevelOne GEP-1022 Manuel utilisateur

LevelOne

LevelOne GEU-0521 Manuel utilisateur

LevelOne

LevelOne GEP-0950 Manuel utilisateur

LevelOne

LevelOne GTL-2872 Manuel utilisateur

LevelOne

LevelOne GTL-2661 Manuel utilisateur

LevelOne

LevelOne FSW-1621 Manuel utilisateur

LevelOne

LevelOne GEU-0522 Manuel utilisateur

LevelOne

LevelOne POH-1260 Manuel utilisateur

LevelOne

LevelOne FSW-0507TX Manuel utilisateur

LevelOne

LevelOne FSW-2106 Manuel utilisateur

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur