Lectrosonics SMDWB series Manuel utilisateur

Quick

Start

Guide

Fill in for your records:

Serial Number:

Purchase Date:

This guide is intended to assist with

initial setup and operation of your

Lectrosonics product.

For a detailed user manual, down-

load the most current

version at:

www.lectrosonics.com

SMWB Series Transmitters

05 April 2018

Digital Hybrid Wireless®US Patent 7,225,135

SMWB SMDWB

LECTROSONICS, INC.2

Controls and Functions

Modulation

Indicators Battery

Status LED

-40 -20 0

REC

Audio

Input

Jack

Antenna

Port

microSDHC memory

card port

Antenna

Port

Audio

Input

Jack

microSDHC

memory card

port

SMWB Series

The SMWB transmitter delivers the advanced technology and features of Digital

Hybrid Wireless®and combines 24-bit digital audio chain with an analog FM

radio link to eliminate a compandor and its artifacts, yet preserves the extended

operating range and noise rejection of the ﬁnest analog wireless systems. DSP

“compatibility modes” allow the transmitter to also be used with a variety of

analog receivers by emulating the compandors found in earlier Lectrosonics

analog wireless and IFB receivers, and certain receivers from other manufactur-

ers (contact the factory for details).

Plus, the SMWB has a built in recording function for use in situations where RF

may not be possible or to work as a stand alone recorder. The record function

and transmit functions are exclusive of each other - you cannot record AND

transmit at the same time. The recorder samples at 44.1kHz rate with a 24 bit

sample depth. (the rate was selected due to the required 44.1kHz rate used for

the digital hybrid algorithm). The micro SDHC card also offers easy ﬁrmware

update capabilities without the need for a USB cable or driver issues.

www.lectrosonics.com 3

Battery Installation

The transmitter is powered by two

AA batteries. We recommend using

lithium for longest life.

Because some batteries run down

quite abruptly, using the Power

LED to verify battery status will not

be reliable. However, it is possible

to track battery status using the

battery timer function available in

Lectrosonics Digital Hybrid Wireless

receivers.

The battery door opens by simply

unscrewing the knurled knob part

way until the door will rotate. The

door is also easily removed by un-

screwing the knob completely, which

is helpful when cleaning the battery

contacts. The battery contacts can

be cleaned with alcohol and a cot-

ton swab, or a clean pencil eraser.

Be sure not to leave any remnants

of the cotton swab or eraser crumbs

inside the compartment.

A small pinpoint dab of silver

conductive grease* on the thumb-

screw threads can improve battery

performance and operation. Do this

if you experience a drop in bat-

tery life or an increase in operating

temperature.

Insert the batteries according to

the markings on the back of the

housing. If the batteries are inserted

incorrectly, the door may close but

the unit will not operate.

*if you are unable to locate a sup-

plier of this type of grease - a local

electronics shop for example - con-

tact the factory for a small mainte-

nance vial.

Menu Shortcuts

From the Main/Home Screen, the

following shortcuts are available:

• Record: Press the MENU/SEL

+ UP arrow simultaneously

• Stop Recording: Press the

MENU/SEL + DOWN arrow

simultaneously

NOTE: The shortcuts are

only available from the main/

home screen AND when a

microSDHC memory card is

installed.

LECTROSONICS, INC.4

Turning Power ON

Short Button Press

When the unit is turned off, a short press of the power button will turn the

unit on in the Standby Mode with the RF output turned off.

494.500

-40 -20 0

b 19

RF indicator blinks

To turn the RF output on from the Standby Mode, press the Power button/Rf

On? option.

Resume

Pwr Off

Rf On?

AutoOn?

Rf On?

Ye s

Long Button Press

When the unit is turned off, a long press of the power button will start a count-

down to turn the unit on with the RF output turned on. Continue to hold the

button until the countdown is complete.

Hold

for

Rf On

...3

503.800

-40 -20 0

b 19

RF indicator not blinking

Hold power

button until

the counter

reaches 3

If the button is released before the countdown is completed, the unit will

switch back to RF output turned off.

www.lectrosonics.com 5

Power Button Menu

When the unit is already turned on, the Power Button is used to turn the unit

off, or to access a setup menu.

A long press of the button turns the power off.

A short press of the button opens a menu for the following setup options. Se-

lect the option with the UP and DOWN arrow buttons then press MENU/SEL.

• Resume returns the unit to the previous screen and operating mode

• Pwr Off turns the unit off

• Rf On? turns the RF output on or off

• AutoOn? selects whether or not the unti will turn on automatically after a

battery change

• Remote enables or disables the audio remote control (dweedle tones)

• Bat Type selects the type of battery in use

• Backlit sets the duration of the LCD backlight

• Clock sets the Year/Month/Day/Time

• Locked disables the control panel buttons

• LED Off enables/disables control panel LEDs

• About displays the model number and ﬁrmware revision

A long press of the button starts a countdown from 3 to 1 to turn the unit off.

LECTROSONICS, INC.6

Transmitter Operating Instructions

• Install battery(s)

• Turn power on in the Standby mode (see previous section)

• Connect microphone and place it in the position where it will be used.

• Have user talk or sing at the same level that will be used in the produc-

tion, and adjust the input gain so that the -20 LED blinks red on louder

peaks.

Gain

Freq

Rolloff

Compat -40 -20 0

Gain

Use the UP and DOWN

arrow buttons to adjust

the gain until the -20

LED blinks red on

louder peaks

Signal Level -20 LED -10 LED

Less than -20 dB Off Off

-20 dB to -10 dB Green Off

-10 dB to +0 dB Green Green

+0 dB to +10 dB Red Green

Greater than +10 dB Red Red

• Set the frequency and compatibility mode to match the receiver.

• Turn the RF output on with the Rf On? item in the power menu, or by

turning the power off and then back on while holding the power button in

and waiting for the counter to reach 3.

NOTE: The translucent “bubble” next to the antenna connector is

an IR port that can be used to transfer settings from an IR enabled

Lectrosonics receiver. Refer to the receiver manual for details.

www.lectrosonics.com 7

Record Operating Instructions

• Install battery(s)

• Insert microSDHC memory card

• Turn power on

• Format memory card

• Connect microphone and place it in the position where it will be used.

• Have user talk or sing at the same level that will be used in the produc-

tion, and adjust the input gain so that the -20 LED blinks red on louder

peaks

Gain

Freq.

Rolloff

Compat -40 -20 0

Gain

Use the UP and DOWN

arrow buttons to adjust

the gain until the -20

LED blinks red on

louder peaks

Signal Level -20 LED -10 LED

Less than -20 dB Off Off

-20 dB to -10 dB Green Off

-10 dB to +0 dB Green Green

+0 dB to +10 dB Red Green

Greater than +10 dB Red Red

• Press MENU/SEL and choose Record from the menu

503.800

-40 -20 0

b 19

REC

Files

Format

Record

Gain

RECORD-

ING

• To stop recording, press MENU/SEL and choose Stop; the word SAVED

appears on the screen

SAVED

Files

Format

Stop

Gain

503.800

-40 -20 0

b 19

To play back the recordings, remove the memory card and copy the ﬁles onto

a computer with video or audio editing software installed.

LECTROSONICS, INC.8

SMWB Main Menu

Freq.

Rolloff

Compat

StepSiz

Phase

TxPower

SEL

BACK

Freq

Press SEL to

select desired

adjustment

Use arrow keys

to select desired

frequency

SEL

BACK

SEL

BACK

Compat Select from

listing

Use arrow keys to select

compatibility mode

SEL

BACK

Use arrow keys to select

frequency step size

100 kHz

25 kHz

StepSiz

SEL

BACK

Use arrow keys to select

audio output polarity

Pos.

Neg.

Phase

SEL

BACK

Use arrow keys to select

RF power output

25mW

50 mW

100 mW

TxPower

Rolloff

70 Hz

Use arrow keys to

select input gain

Select from

listing

b 21

550.400

Hybrid

From the Main Window press MENU/SEL.

Use the UP/Down arrow keys to select the item.

Files

SEL

BACK

Files 0014A000

0013A000

Use arrow keys to

select file in list

Select from

listing

Format

SEL

BACK

Use arrow keys to initiate

formatting the memory card

Yes

Format?

(erases)

Gain

SEL

BACK

Gain 22

Use arrow keys to

select input gain

Select from

listing

Record

SEL

BACK

RECORD-

ING OR

Stop

SEL

BACK

SAVED

Default

SEL

BACK

Use arrow keys to return recorder

to default factory settings

Yes

Default

settings

Naming

SEL

BACK

Use arrow keys to select

file naming method

Seq #

Clock

Naming

SD Info

SEL

BACK

[SMWB ]

Max Rec

E.........................F

0/ 14G

Fuel gauge

Storage used

Storage capacity

Available recording time (H : M : S)

www.lectrosonics.com 9

SMWB Power Button Menu

Rf On?

BatType

Remote

Press SEL to return to

the previous screen

SEL

BACK

Use arrow keys to

turn RF signal on/off

Yes

Rf On?

SEL

BACK

Use arrow keys to

choose battery type

Alk.

Lith.

BatType

SEL

BACK

Use arrow keys to

enable/disable remote

Enable

Ignore

Remote

From the Main Window press the power button.

Use the UP/DOWN arrow keys to select the item.

Resume

Pwr Off

Press SEL to turn the

power off

AutoOn?

SEL

BACK

ProgSw Use arrow keys to enable

auto power restore

Yes

1.5 V

Backlit

SEL

BACK

Backlit Use arrow keys to select

LCD backlight duration

30 sec

5 min)

About

Locked

SEL

BACK

About

SMWB

v1.00

Displays firmware version

SEL

BACK

Use arrow keys to

lock/unlock keypad

Yes

Locked?

LED Off

SEL

BACK

LEDs Use arrow keys to turn

LEDs on or off

Off

Clock

SEL

BACK

Clock

2017

07 / 26

17 : 19

Year

Month / Day

Hour : Minute

LECTROSONICS, INC.10

Setup Screen Details

Locking/Unlocking Changes to Settings

Changes to the settings can be locked in the Power Button Menu.

Locked?

Ye s

LOCKED

(menu to

unlock)

Clock

Locked

LED Off

About

When changes are locked, several controls and actions can still be used:

• Settings can still be unlocked

• Menus can still be browsed

• When locked, POWER CAN ONLY BE TURNED OFF by removing the

batteries.

Main Window Indicators

The Main Window displays the band number, Standby or Operating mode,

operating frequency, audio level, battery status and programmable switch

function. When the frequency step size is set at 100 kHz, the LCD will look

like the following.

474.500

-40 -20 0

b 470

Block number

Frequency (MHz)

Frequency

(hex number)

Operating mode

Battery status

Audio level

When the frequency step size is set to 25 kHz, the hex number will appear

smaller and may include a fraction.

474.525

-40 -20 0

b 470

2C Note that the

frequency has

increased by 25

kHz from the upper

example.

Fraction

1/4 = .025 MHz

1/2 = .050 MHz

3/4 = .075 MHz

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Lectrosonics Émetteur

Lectrosonics

Lectrosonics SMa Series Manuel utilisateur

Lectrosonics

Lectrosonics WM/E01 Manuel utilisateur

Lectrosonics

Lectrosonics HHa-941 Manuel utilisateur

Lectrosonics

Lectrosonics UM400 Manuel utilisateur

Lectrosonics

Lectrosonics UM200 Manuel utilisateur

Lectrosonics

Lectrosonics M2T/E01 Non Dante Manuel utilisateur

Lectrosonics

Lectrosonics DHu Manuel utilisateur

Lectrosonics

Lectrosonics SMDa Manuel utilisateur

Lectrosonics

Lectrosonics HMa Manuel utilisateur

Lectrosonics

Lectrosonics UM450 Manuel utilisateur

Lectrosonics

Lectrosonics UM700 Manuel utilisateur

Lectrosonics

Lectrosonics UH400A Manuel utilisateur

Lectrosonics

Lectrosonics LMa Manuel utilisateur

Lectrosonics

Lectrosonics DPR-A Manuel utilisateur

Lectrosonics

Lectrosonics SM Series Manuel utilisateur

Lectrosonics

Lectrosonics IFBT4/E01 Manuel utilisateur

Lectrosonics

Lectrosonics WM/E02 Manuel utilisateur

Lectrosonics

Lectrosonics SM Manuel utilisateur

Lectrosonics

Lectrosonics T4 Manuel utilisateur

Lectrosonics

Lectrosonics UM400a Manuel utilisateur

Lectrosonics

Lectrosonics SMDB/E01 Series Manuel utilisateur

Lectrosonics

Lectrosonics H187 Manuel utilisateur

Lectrosonics

Lectrosonics UM400AV Manuel utilisateur

Lectrosonics

Lectrosonics LM Manuel utilisateur

Manuels Émetteur populaires d'autres marques

NIVELCO

NIVELCO EasyTREK SCA-300 Series Manuel du propriétaire

Honeywell

Honeywell 5816WMBR Manuel utilisateur

Kamstrup

Kamstrup READy MTU Mode d'emploi

Omega

Omega ZW Series Manuel utilisateur

ABB

ABB Field 264H Mode d’emploi

Alinco

Alinco DJ-V17T Manuel utilisateur

Dejero

Dejero EnGo 3x Manuel utilisateur

Rosemount

Rosemount 4600 Manuel utilisateur

Speaka Professional

Speaka Professional 2342740 Manuel utilisateur

trubomat

trubomat GAB 1000 Manuel utilisateur

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 Manuel utilisateur

Rondish

Rondish UT-11 Manuel utilisateur

MG 10JRE Manuel utilisateur

Burkert

Burkert 8177 Manuel utilisateur

Firetide

Firetide HotPort 3203 Manuel

Tele Radio

Tele Radio T9-02 Manuel utilisateur

Rotronic

Rotronic HygroFlex HF3 Series Manuel utilisateur

Jamara

Jamara FCX6 Pro Tel Manuel utilisateur