LaserLiner ArcoMaster 40 Manuel utilisateur

ArcoMaster 40/60

420

600

ArcoMaster 40/60

02 03

ArcoMaster 40/60

06 07

Garantieerklärung:

Die Garantiezeit beträgt 2 Jahre ab Kaufdatum. Von der Garantie

sind ausgenommen: Schäden, die auf unsachgemäßen Gebrauch

oder falscher Lagerung zurückzuführen sind, normaler Verschleiß und

Mängel, die den Wert oder die Gebrauchstauglichkeit nur unerheblich

beeinﬂussen. Bei Eingriffen nicht von uns autorisierter Stellen erlischt

die Garantie. Im Garantiefall geben Sie bitte das vollständige Gerät mit

allen Informationen, sowie Rechnung einem unserer Händler oder senden

Sie es an Umarex-Laserliner.

Libellengenauigkeit ± 0,25° mm/m

Genauigkeit ± 0,1°

Messbereich 0 – 220°

AutoShut Off 3 min

Schenkellänge 40 / 60 40 / 60 cm

Stromversorgung 2 x 1.5V (Typ AA/LR06)

Abmessungen 40 420 x 57 x 40 mm ( B x H x T )

Abmessungen 60 600 x 57 x 40 mm ( B x H x T )

Gewicht 40 0,8 kg

Gewicht 60 1,05 kg

Artikel-Nr. ArcoMaster 40 075.130A

Artikel-Nr. ArcoMaster 60 075.131A

Technische Änderungen vorbehalten 11.2008

Technische Daten:

Ausschalten/ AutoShut Off:

• Zum Ausschalten des Gerätes die Taste (1) mind. 3 Sek. lang drücken.

Im Ruhezustand schaltet sich das Gerät automatisch aus.

Wasserwaagenfunktion:

• Mit den Vertikal- und Horizontallibellen (9, 10) wird die Ausrichtung zur

Messﬂäche (14) angezeigt.

Keypad

1. ON/OFF-Activates the 180° ﬂip display

2. Angle bisector

3. Hold measured value

4. Set reference angle

Display

5. Battery indicator: empty

6. Symbol for REF mode

7. Value of measured angle

8. HOLD indicator

ArcoMaster 40/60

9. Suspension eye

10. Vertical vial

11. Horizontal vial

12. Folding measuring arm can

be pulled out on either side

13. Lay edge

14. Base / measuring surface

15. Pivot joint

Rear

16. Battery compartment

17. LCD on both sides

Digital electronic angle gauge with inside or outside angle display from

0° to 220°. The folding measuring arm can be pulled out on either side

and can also be extended. Additional vertical and horizontal vial and

two illuminated ﬂip displays that can be rotated 180°.

351 42

876

ArcoMaster 40/60

Inserting batteries:

Open the battery compartment (16) on the rear of the device and insert

two new batteries (AA/LR6) as per the installation symbols. Correct polarity

must be observed.

• As soon as the battery symbol (5) lights up, replace the batteries.

Switching on and measuring:

The ArcoMaster can measure angles continuously from 0° to 220°.

• Press button (1) to switch the device on.

• All display symbols appear for a couple of seconds.

• Place the measuring arm at the required position; the value of

the measured angle (opening angle between the base arm and

the folding measuring arm) appears on the display (7).

• The measured value can be read from both displays.

NOTE: The barely audible noise emitted by the pivot joint is due to

a precise sensor and is part of the design.

Flip display can be rotated 180°

• If angles are to be measured overhead, press button (1) brieﬂy

and repeatedly to rotate the display by 180°.

Holding an angle (HOLD)

• Button (3) can be used to hold the measurement results; once

they have been transmitted, pressing button (3) again will reset them.

Changing the reference angle:

• Angular differences can be transmitted using button (4): Set the required

angle and press button (4). The display then changes to “0.0” and (S)

also appears. The required reference angle is now set and can be

transmitted to other objects. This function can also be used to measure

an angular difference.

IMPORTANT: Once all angles have been transmitted, the new reference

angle must be cleared; to do this, press the REF button repeatedly.

Switching the device off/on will also delete the REF value.

Warranty:

The warranty is valid for 2 years from the date of purchase. The warranty

does not cover damage caused by improper use or storage, normal wear

and tear, or defects which only insigniﬁcantly impair the value of the

product or its functioning. Any tampering by unauthorised persons will

render this warranty void. In the event that you need to claim warranty,

please take the complete device together with all information and the

invoice to one of our dealers or

send it in to UMAREX-Laserliner.

Vial precision ± 0,25° mm/m

Accuracy ± 0,1°

Measurement range: 0 – 220°

AutoShut Off 3 min

Arm length 40 / 60 40 / 60 cm

Power supply 2 x 1.5V batteries (AA/LR06)

Dimensions 40 420 x 57 x 40 mm (W x H x D)

Dimensions 60 600 x 57 x 40 mm (W x H x D)

Weight 40 0,8 kg

Weight 60 1,05 kg

Article no. ArcoMaster 40 075.130A

Article no. ArcoMaster 60 075.131A

Technical revisions reserved 11.2008

Technical data:

Switching off/auto shut off:

• To switch the device off, press button (1) and hold it down for

at least 3 seconds. The device will switch off automatically if left

in an idle state.

Function of the spirit levels:

• The vertical and horizontal vials (9, 10) indicate the alignment to the

measuring surface (14).

ArcoMaster 40/60

40: 075.130A / 60: 075.131A / Rev.1108

SERVICE

Umarex GmbH & Co KG

– Laserliner –

Möhnestraße 149, 59755 Arnsberg, Germany

Tel.: +49 2932 638-300, Fax: +49 2932 638-333

[email protected]

Umarex GmbH & Co KG

Donnerfeld 2

59757 Arnsberg, Germany

Tel.: +49 2932 638-300, Fax: -333

www.laserliner.com

Autres manuels pour ArcoMaster 40

Ce manuel convient aux modèles suivants

Autres manuels LaserLiner Instrument de mesure

LaserLiner

LaserLiner CableTracer Pro Manuel utilisateur

LaserLiner

LaserLiner Quadrum Manuel utilisateur

LaserLiner

LaserLiner Duraplane G360 Manuel utilisateur

LaserLiner

LaserLiner MetalliFinder Pro Manuel utilisateur

LaserLiner

LaserLiner DistanceMaster Compact Pro Manuel utilisateur

LaserLiner

LaserLiner ClimaHome-Check Manuel utilisateur

LaserLiner

LaserLiner RollPilot S6 Manuel utilisateur

LaserLiner

LaserLiner CondenseSpot XP Manuel utilisateur

LaserLiner

LaserLiner DigiLevel Compact Manuel utilisateur

LaserLiner

LaserLiner RollPilot D12 Manuel utilisateur

LaserLiner

LaserLiner RollPilot Mini Manuel utilisateur

LaserLiner

LaserLiner StarFinder Manuel utilisateur

LaserLiner

LaserLiner AutoControl-Master ACM Manuel utilisateur

LaserLiner

LaserLiner LaserRangeMaster Pocket Manuel utilisateur

LaserLiner

LaserLiner DistanceMaster Compact Plus Manuel utilisateur

LaserLiner

LaserLiner SmartCross Manuel utilisateur

LaserLiner

LaserLiner DistanceMaster Compact Manuel utilisateur

LaserLiner

LaserLiner AutoSmart-Laser Manuel utilisateur

LaserLiner

LaserLiner SuperCross SCL 2 Manuel utilisateur

LaserLiner

LaserLiner SoundTest-Master Manuel utilisateur

LaserLiner

LaserLiner ACL 4C Manuel utilisateur

LaserLiner

LaserLiner DistanceMaster 100 Manuel utilisateur

LaserLiner

LaserLiner MultiMeter Pocket XP Manuel utilisateur

LaserLiner

LaserLiner DampFinder Compact Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur