Kohler ENGLEFIELD MILANO FS Manuel utilisateur

1378872-A02-A 5/03/2019

INSTALLATION

INSTRUCTIONS

BATHS

Engleeld

MILANO Solid Surface FS Baths

Englefield has a history of

making superb baths and

their popularity is testament to

their quality and affordability.

It’s the details that Englefield

cares about - from pioneering

the latest technology, to

innovative design, it’s all to

make your bathing

experience the very best it

can be.

ROUGH IN DIMENSIONS

NOTE: Check the rough-in and room dimensions to provide adequate available

space for the bath unit. Arrange the location of the drain in advance and ensure

that the flooring is prepared to allow space for the drain. Ensure that the floor is level.

800

1700

540

1146 542

WARNING: The Milano Solid Surface Freestanding bath is very heavy. Please make

sure that the floor is structurally sound and provides adequate support for the bath,

water and the user. A mechanical lifting device is advised when manoeuvring the

bath.

Page 1

Before installing the bath please read these instructions carefully to familiarise yourself with

the required tools, materials and installation sequences. The installation documents included

assume that walls are plumb and floors are level.

In addition to proper installation, read all safety instructions and refer to the Homeowner’s

Guide for important care and cleaning information. Ensure that all local building and plumbing

codes are observed. These instructions contain important care, cleaning and warranty

information. Please leave these instructions for the consumer after installation.

IMPORTANT: Before installation please remove the protective packaging from the bath and

inpsect the Milano Solid Surface FS bath and report any damage to us. Installers are

responsible for damage that occurs during installation and no claims for damages will be

accepted once the bath has been installed.

INSTALLATION INSTRUCTIONSMILANO Solid Surface FS Baths

BEFORE YOU BEGIN

TOOLS AND MATERIALS REQUIRED

ENGLEFIELD

CONCRETE SLAB FLOOR PREPARATION - IF APPLICABLE

Note: Instructions, drawings, and diagrams contained in this manual present information available at the

time of printing. Although every attempt has been made to keep them up-to-date, Englefield reserves the

right to implement product changes without further notice.

Timber blocks

1) Mark out the drain position and mark out the region in the floor for the drain.

2) Make floor and plumbing preparations as necessary to make space for the drain. It is

recommended to prepare a waterproof layer for the sub-floor.

Minimum

120mm

Minimum

100mm

Maximum

520mm

Page 2

INSTALLATION INSTRUCTIONS

ENGLEFIELD

MILANO Solid Surface FS Baths

1) Install the drain in the sub-floor & position it accordingly to allow for the waste to be

connected. The self-sealing trap with flexible waste pipe (80144A-NA) is recommended,

where there is no underfloor access. Please adhere to the relevant sections of AS/NZS

3500 plumbing standard.

INSTALLATION

3) Connect the waste outlet to the drain. Check to see that all connections are firmly

tightened.

4) Close-off the waste and fill the bath with water, allow the water to stand for at least 30

minutes, check for leaks. Attend to waste and pipe connections as necessary.

2) Raise the Free Standing bath off the floor by propping it up onto timber blocks

positioned at either end of the bath. Install and connect the waste outlet. Apply silicone

sealant around the waste connections to ensure a water-tight fit.

Page 3

INSTALLATION INSTRUCTIONS

ENGLEFIELD

CONTACT AND WARRANTY INFORMATION

NEW ZEALAND

KOHLER NZ LTD

Free Ph: 0800 100 382

Free Fax: 0800 664 488

www.engleﬁeld.co.nz

AUSTRALIA

KOHLER CO.

Free Ph: 1 800 ENGLEFIELD

(1 800 364 533)

www.engleﬁeld.com

1) Please refer to the Homeowner’s Guide for cleaning instructions.

2) Because baths are often placed on cold floors, and Solid surface baths are sensitive

to thermal shock, it is highly recommende in cold periods, to run in lukewarm water for

a couple of minutes before running hot water. It is recommended the hot water be no

more than 60 C.

For warranty information, please visit our website.

CLEANING AND MAINTENANCE INSTRUCTIONS

Installation complete.

MILANO Solid Surface FS Baths

5) Carefully slide the timber blocks out and gently lower the bath into place. Apply an

appropriate silicone sealant, ensuring a watertight seal between the bath and adjacent

surfaces.

3) Light scratches can be removed, if necessary, with very fine sandpaper. It is

recommended to start with 1200 grade followed by 2500 grade. Finally use car cutting

compound to polish the area to recover the gloss surface.

Autres manuels Kohler Baignoire

Kohler

Kohler K-1209P Guide de démarrage rapide

Kohler

Kohler K-1158 Guide de démarrage rapide

Kohler

Kohler K-12205-H Series Manuel utilisateur

Kohler

Kohler Underscore K-5716-GCR Manuel utilisateur

Kohler

Kohler K-856-CT Guide de démarrage rapide

Kohler

Kohler K-1969-G Guide de démarrage rapide

Kohler

Kohler K-1112-CB Guide de démarrage rapide

Kohler

Kohler K-1169 Guide de démarrage rapide

Kohler

Kohler BIOVE K-8277T-GR Manuel utilisateur

Kohler

Kohler Mariposa K-1257-GHRAW Manuel utilisateur

Kohler

Kohler sok K-1188 Instructions de montage

Kohler

Kohler K-839 Guide de démarrage rapide

Kohler

Kohler VOLUTE K-20610T Manuel utilisateur

Kohler

Kohler K-1229 Guide de démarrage rapide

Kohler

Kohler K-1418-HC Instructions de montage

Kohler

Kohler K-819 Instructions de montage

Kohler

Kohler K-1457 Guide de démarrage rapide

Kohler

Kohler K-820 Instructions de montage

Kohler

Kohler K-1357P-LA Guide de démarrage rapide

Kohler

Kohler K-700-0 Instructions de montage

Kohler

Kohler REVIVAL K-1375-RV Manuel utilisateur

Kohler

Kohler K-1913 Manuel utilisateur

Kohler

Kohler K-1227 Guide de démarrage rapide

Kohler

Kohler K-850 Guide de démarrage rapide

Manuels Baignoire populaires d'autres marques

Agua

Agua BARTOLI-66 Manuel utilisateur

PAA

PAA PRELUDE Manuel utilisateur

BETTE

BETTE SILHOUETTE Manuel utilisateur

American Standard

American Standard Whirlpool/Bathing Pool 2748.XXXW Manuel utilisateur

Oliveri

Oliveri Naples Manuel utilisateur

Lyons

Lyons Elite ETLxx663219 Series Manuel utilisateur

Woodbridge

Woodbridge BJ500 Instructions de montage

Whirlpool

Whirlpool Ariel ARL-702 Manuel utilisateur

TEIKO

TEIKO EXCELLENT DUO Manuel utilisateur

American Standard

American Standard Colony 5-1/2' x 32" Manuel utilisateur

American Standard

American Standard 3052OD.X0X Guide de démarrage rapide

agape

agape MARSIGLIA AVAS1075 Manuel utilisateur

Kallista

Kallista P50045-G5 Instructions de montage

Ariel

Ariel AM Series Manuel utilisateur

Agua

Agua BAHLI-60 Manuel utilisateur

DURAVIT

DURAVIT XViu 700443 Manuel utilisateur

American Standard

American Standard Colony 2740 Series Manuel utilisateur

Rapsel

Rapsel OFURO Manuel