Kodak FLIK X7 Manuel utilisateur

KODAK FLIK X7

HOME PROJECTOR

User Manual

6.3"H | 8.1"W | 2.9"D (15.9 cm | 20.5 cm | 7.5 cm)

Please read all directions before using the product and retain this guide for reference.

Thank you for purchasing the KODAK FLIK X7 HOME PROJECTOR. This User Guide is intended to

provide you with guidelines to ensure that operation of this product is safe and does not pose risk to

the user. Any use that does not conform to the guidelines described in this User Guide may void the

limited warranty.

Please read all directions before using the product and retain this guide for reference. This product is

intended for household use only. It is not intended for commercial use.

This product is covered by a limited one-year warranty. Coverage is subject to limits and exclusions.

See warranty for details.

1. INTRODUCTION

Rated Input: 100 V – 220 V

Native Resolution: 1280 x 720p

KODAK FLIK X7 HOME PROJECTOR

Remote Control

User Guide

Tabletop Tripod

Carrying Case

Charging Cable

2. SPECIFICATIONS

•Do not attempt to disassemble this device for any reason.

•Do not store the projector in areas where it will be exposed to high temperatures, humidity, or direct

sunlight. Exposure to any or all of these could permanently damage the projector.

•Never handle the projector with damp or wet hands. This could damage the projector or create the

risk of electric shock.

•Keep the projector out of the reach of children.

•Never point the projector at someone else’s face or look directly into the projector light. The light is

bright and could cause damage.

•Do not use products such as alcohol, gasoline, diluent, or any other organic solvent when cleaning or

attempting to clean this product.

•Do not use this device in an environment where it will be exposed to heavy dust or humidity/moisture.

•Never drop or shake the projector, as this could cause it to malfunction or permanently damage the

inside parts.

•Do not use the projector while bathing or in a shower.

•Do not place or store the projector where it can fall or be pulled into a tub or sink.

3. BOX CONTENTS

4. SAFETY PRECAUTIONS

•Do not place, drop, or submerge the projector in water or any other liquid.

•If the projector somehow falls into water despite you taking all of the above precautions, please do not

reach into the water to retrieve it. Unplug it immediately and then retrieve it.

•Take care that objects do not fall and liquids are not spilled onto the projector.

5. PRODUCT OVERVIEW

1. Power

2. Back

3. Left

4. Up

5. Right

6. Down

7. OK

8. Settings

9. Input Source

10. Lens

11. Focus Wheel

12. VGA Input

13. USB Input

14. HDMI Input

15. SD Card Input

16. AV Input

17. Audio Out Jack (3.5 mm)

18. Air Outlet

19. Air Intake

20. Power Input

21. Speaker

22. Adjustable Foot

23. Stationary Foot

24. Tripod Dock

6. REMOTE CONTROL OVERVIEW

7. USING THE AUDIO OUT JACK

1. Power

2. Mute

3. Rewind

4. Play/Pause

5. Fast Forward

6. OK

7. Up

8. Left

While the projector does include two (2) built-in speakers for regular use, you can also connect either

headphones or a portable speaker to the 3.5 mm Audio Out Jack as shown in the image below.

To adjust the volume or sound settings, navigate to the Settings menu from the home screen and press

OK to open the Settings Page. (You can also hit the Settings button on top of the projector to jump

straight to this page.) Use the right or left arrows to navigate to the Sounds Page, where you can adjust

the treble/bass or choose from three (3) presets for varying types of audio iles. You can also use the

remote to raise and lower the volume.

9. Right

10. Down

11. Back

12. Settings

13. Input Source

14. Volume –

15. Volume +

16. Two (2) AAA Batteries

You can use this projector with:

1. VGA Input

2. USB Input

3. HDMI® Input

4. SD™ Card Input

5. AV Input

To switch between source types, tap the Sources button on top of the projector and use the arrows to

highlight the source you want to use.

9. USING DIFFERENT MEDIA SOURCES

8. POWERING THE PROJECTOR ON/OFF

To turn the projector on or o, press the power button on top of the projector.

10. NAVIGATING YOUR PROJECTOR

MAIN PAGE:

• The Main Page is your start page for all

operations with your projector.

• When unit is powered on, the Main

Page will load automatically.

• To return to the Main Page at any time,

press the Back button until the Main

Page loads.

Your photo iles will be displayed. Navigate

to the ile you wish to open, and press the

OK button to open the desired ile. During

playback, navigate to the Control Bar at

the bottom of the screen and press the OK

button to select your desired option.

12. PHOTOS PAGE

Your video iles will be displayed. Navigate to

the ile you wish to open, and press the OK

button to begin playback. During playback,

navigate to the Control Bar at the bottom of

the screen and press the OK button to select

your desired option.

11. MOVIES PAGE

Movies : Navigate to this icon and press the OK button to select. This will access the Movies page,

where your video iles will be available for playback.

Photos : Navigate to this icon and press the OK button to select. This will access the Photos page,

where your photo iles will be available for playback.

Music : Navigate to this icon and press the OK button to select. This will access the Music page,

where your music iles will be available for playback.

Settings : Navigate to this icon and press the OK button to select. This will access the Settings page,

where you can adjust the settings for your projector, such as Contrast and Brightness.

Access the menu by pressing the Input

Source button. The menu will appear in

the top right corner of the screen. Use

the Up and Down buttons to navigate

through the options and ensure the

projector is receiving the signal from

your desired source. Once you’ve

navigated to your choice, press the OK

button to conirm your selection.

15. INPUT SOURCE MENU

Your music iles will be displayed. Navigate

to the ile you wish to open, and press

the OK button to begin playback. During

playback, navigate to the Control Bar at

the bottom of the screen and press the OK

button to select your desired option.

From the settings page, you can navigate

to other menus using the arrows on top

of the projector or on the remote. Adjust

the date/time, display size, picture mode,

volume and sound settings, and more

from these menus.

13. MUSIC PAGE

14. SETTINGS PAGE

If the image on the screen appears fuzzy or unfocused when you turn the projector on, use the focus

wheel on the top to correct the image. Move the wheel left or right until the image appears sharp and

clear. The dial behind the focus wheel allows you to adjust the viewing angle of the screen.

NOTE: For best performance, the projector must be located a minimum distance of 3.5

feet (1 meter) from the screen. If a speciic image or video remains fuzzy after adjusting

the focus wheel, try pressing the back button until you return to the Main Page. If the Main

Page graphics appear clear and the image is still fuzzy, the problem may be the image or

video quality.

16. ADJUSTING FOCUS

17. ADJUSTING VOLUME

To adjust the device volume during playback, use the < and > buttons on the top of the projector or the

volume buttons on the remote control.

18. ADJUSTING PICTURE SETTINGS

From the Main Page, navigate to Settings and press the OK button to select. Once you are on the

Settings Page, select the top option, “Picture Mode” and use the arrows to navigate through the preset

options. The inal option “User” allows you to personally customize the brightness and other

picture settings.

19. SETTING THE SCREEN ORIENTATION

From the Main Page, navigate to Settings and

press the OK button to select. Once you are on the

Settings Page, select the option that says “Rotate”

and press the OK button to cycle through the various

options until the screen matches your projector

orientation.

20. RESETTING THE PROJECTOR

From the Main Page, navigate to Settings and

press the OK button to select. Once you’ve loaded

the Settings Page, use the left arrow on top of the

projector to open the Options Menu. From here you

can adjust the software language, install irmware

updates, and reset the projector.

To reset the projector, use the down arrows to

highlight the second option, “Restore Factory

Defaults” and press the OK button. The projector will

give you a second popup window to conirm that

you really want to restore the default settings, and

you’ll need to select YES to proceed.

21. CONNECTING EXTERNAL DEVICES

A. USB Drives and SD Cards

To access photos, videos, or music stored on any USB drive or memory card, simply insert the

removable storage device into the corresponding port on the side. The projector will read the iles

directly from the drive. You can access them from the Main Page by selecting the Music, Photos, or

Movies options on the home screen. However, you’ll need to make sure you have correctly selected the

input source from the source menu irst: USB drives are denoted as USB, and SD™ cards are

denoted as TF.

B. HDMI®/VGA Compatible Devices

If you’re using a VGA compatible device, connect the cable to the port on the side and gently screw the

pins down to hold the connection in place. You should then be able to access your photos, videos, or

music.

If you’re using an HDMI compatible device, such as a laptop, personal computer, smartphone, tablet,

or video game console, connect an HDMI cable from the device to your projector to access photos,

videos, or music.

For some devices, you will require an HDMI-to-HDMI cable and/or adapters, which you will need to

purchase separately. To make things a little easier, we’ve compiled this table of devices and adapters

for your convenience.

Table des matières

Autres manuels Kodak Projecteur

Kodak

Kodak Carousel S-AV 1050 Manuel utilisateur

Kodak

Kodak ishow 1000 Manuel utilisateur

Kodak

Kodak Pageant Manuel utilisateur

Kodak

Kodak Cube Manuel utilisateur

Kodak

Kodak Carousel S-AV28 Mode d'emploi

Kodak

Kodak 960 Guide de l'utilisateur

Kodak

Kodak EKTAPRO Manuel utilisateur

Kodak

Kodak DP1100 - Digital Projector Manuel utilisateur

Kodak

Kodak Ektalite E30 Manuel utilisateur

Kodak

Kodak BC4401 - Carousel 4400 Projector Guide de configuration

Kodak

Kodak LUMA 350 Manuel utilisateur

Kodak

Kodak LUMA 350 Manuel utilisateur

Kodak

Kodak FLIK X4 Manuel utilisateur

Kodak

Kodak S-AV 1020 Manuel utilisateur

Kodak

Kodak DP800 - Digital Projector Mode d'emploi

Kodak

Kodak Carousel S-AV 2060 Manuel utilisateur

Kodak

Kodak PAGEANT 250S Manuel utilisateur

Kodak

Kodak DP2000 - Digital Projector Manuel utilisateur

Kodak

Kodak Ektalite 1000 Manuel utilisateur

Kodak

Kodak EKTAPRO Manuel utilisateur

Kodak

Kodak iSow 1000 Manuel utilisateur

Kodak

Kodak V600 Manuel utilisateur

Kodak

Kodak Carousel 850H Manuel utilisateur

Kodak

Kodak EKTAGRAPHIC III AM Manuel utilisateur

Manuels Projecteur populaires d'autres marques

iEmmet

iEmmet MP-312 Manuel utilisateur

Epson

Epson VS400 Manuel utilisateur

Sony

Sony VPL-HS10 Marketing Specifications & Features Manuel utilisateur

Sony

Sony VPL-HW65ES Manuel de service

Toshiba

Toshiba TLP-791U Manuel utilisateur

Philips

Philips LC1341 Guide de référence

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Manuel utilisateur

NEC

NEC NP600S EDU Manuel utilisateur

BenQ

BenQ SH753P Manuel utilisateur

Eiki

Eiki EK-623U series Manuel utilisateur

Epson

Epson PowerLite Pro Cinema 6020UB Manuel utilisateur

Epson

Epson PowerLite Home Cinema 705HD Manuel utilisateur

Christie

Christie LHD700 Manuel utilisateur

Navitar

Navitar FX Manuel utilisateur

InFocus

InFocus LitePro 560 Manuel utilisateur

Sony

Sony SRX-R815P Manuel utilisateur

Vivitar

Vivitar DP1500 X Manuel utilisateur

Acer

Acer C20 Series Manuel utilisateur