Klein Tools CL3200 Manuel utilisateur

ENGLISH

Instruction

Manual

For Professionals...Since 1857

CL3200

• AUTO VOLTAGE

CURRENT

DETECTION

• BACKLIGHT

• WORKLIGHT

• LOW Z

• BAR GRAPH

• DATA HOLD

• 3-3/4 DIGIT

3999 COUNT LCD

• AUTO RANGE

• NON CONTACT

VOLTAGE TESTER

AUTO

HOLD

99 Washington Street

Melrose, MA 02176

Phone 781-665-1400

Toll Free 1-800-517-8431

Visit us at www.TestEquipmentDepot.com

ENGLISH

CL3200

Instruction Manual

GENERAL SPECIFICATIONS

The Klein Tools CL3200 is an auto-ranging general-purpose clamp meter.

It measures AC /DC voltage, AC current, and resistance. It can also test

non-contact voltage and continuity.

• Operating Altitude: 2000 meters

• Storage Altitude: 10000 meters

• Humidity: 0% to 80% at 32°F to 95°F (0°C to 35°C)

0% to 70% at 32°F to 131°F (0°C to 55°C)

• Operating Temperature: 0°C / 32°F to 40°C / 104°F < 75% R.H.

• Storage Temperature: -20°C /-4°F to 60°C /140°F < 80% R.H.

• Accuracy Temperature: 18°C /64°F to 28°C /82°F

• Temperature Coefﬁcient: 0.1*(speciﬁed accuracy) /°C

• Dimensions: 7.06" x 2.56" x 1.34"

• Weight: 7.9oz.

• Calibration: Accurate for one year

• Certiﬁcations: UL & cUL standard UL3111-1 Listed

• Pollution Degree: 2

• CAT Rating: CAT IV 600V, CATIII 1000V

• Accuracy: ± (% of reading + # of least signiﬁcant digits)

WARNINGS

To ensure safe operation and service of the tester, follow these instructions.

Failure to observe these warnings can result in severe injury or death.

• Before each use, verify meter operation by measuring

a known voltage or current.

• Never use the meter on a circuit with voltages that exceed the

category based rating of this meter.

• Do not use the meter during electrical storms, or in wet weather.

• Do not use the meter or test leads if they appear to be damaged.

• Ensure meter leads are fully seated, and keep ﬁngers away from

the metal probe contacts when making measurements.

• Do not open the meter to replace batteries while the probes

are connected.

• Use caution when working with voltages above 60V DC,

or 25V AC RMS. Such voltages pose a shock hazard.

• To avoid false readings that can lead to electrical shock,

replace batteries if a low battery indicator appears.

• Unless measuring voltage or current, shut off and lock out

power before measuring resistance or capacitance.

• Always adhere to local and national safety codes. Use individual

protective equipment to prevent shock and arc blast injury where

hazardous live conductors are exposed.

SYMBOLS

AC Alternating Current Warning or Caution

DC Direct Current Dangerous levels

DC/AC Voltage or Current Double Insulated Class II

Ground Safe for disconnect

from live conductors

AC Source

FEATURE DETAILS

Test Equipment Depot - 800.517.8431

99 Washington Street Melrose, MA 02176

TestEquipmentDepot.com

A. Use CATIII 1000V or CAT IV 600V rated leads or higher.

Do not attempt to measure more than 1000V DC or 750V AC

B. Keep hands below line when measuring high current levels.

C. Auto Power-Off (Apo)

• Device will power off after 30 minutes non-use.

• Turn the dial or press a button to wake.

• Holding HOLD button while turning on disables Auto Power-Off.

D. Hold /Backlight /Worklight

• Press to hold the current input on the display.

• Press again to return to live reading.

• Press for 2 seconds to enable /disable lights.

• Using lights decreases battery life.

E. F. Battery Replacement

• When indicator is displayed on the LCD, batteries must be

replaced.

• Remove the back screw and replace 2 x AAA batteries.

G. Magnetic Back

• Attach instrument to metal for hands-free use.

H. Bar Graph

• The bar graph shows an approximate analog representation

of a measurement.

• The bar graph responds much faster than the digital display.

• The scale of the bar graph is zero to the maximum reading of

the selected range.

1 2

FUNCTION INSTRUCTIONS

FEATURE DETAILS

1. AC Current: < 200A

• Center wire in guides for best accuracy.

• Opposing currents cancel (use line-splitter when necessary).

2. AC /DC Voltage: <750V AC or 1000V DC

AC /DC Voltage (Low Z): < 600V

• The tester will automatically choose AC voltage or DC voltage or

AC current based on the inputs detected.

• AUTO will be displayed when no input is detected.

• DO NOT Use low impedance (Low Z) mode at voltages greater

than 600 V.

• Use low impedance (Low Z) mode to reduce ghost voltages.

3. Resistance:

<40MΩ

• Do not measure resistance on a live circuit.

4. Continuity

• Display shows resistance.

• Buzzer sounds if less than about 40Ω.

5. Non Contact Voltage (NCV): >25V AC

• NCV works independently of other tester functions. The function

knob can be in the off position.

• Press and hold.

Test Equipment Depot - 800.517.8431

99 Washington Street Melrose, MA 02176

TestEquipmentDepot.com

ENGLISH

ELECTRICAL SPECIFICATIONS

DC Voltage Measurement

Range Resolution Accuracy

1.0V ~ 1000V 0.001V ~ 1V ± (1.0% + 4 digits)

-1.0V ~ -1000V 0.001V ~ 1V

Overload Protection: 1000V

Input Impedance (Nominal): >10MΩ, <100pF

AC Voltage Measurement

Range Resolution Accuracy

1.2V ˜ 750V 0.001 ~ 1V ± (1.5% + 3 digits)

Overload Protection: 750V RMS

Frequency Response: 45 to 400 Hz

Response: Averaging

Input Impedance (Nominal): >10MΩ, <100pF

Input Impedance (Low Z) >3kΩ, <200pF, up to 600V RMS

AC Current Measurement

Range Resolution Accuracy

0.9A ~ 200A 0.1A ± (2.0% + 8 digits)

Overload Protection:

• Current: 200A

Frequency: 45 to 1kHz

Response: Averaging

Resistance Measurement

Range Resolution Accuracy

400Ω˜4MΩ0.1Ω˜0.001MΩ± (1.0% + 4 digits)

40MΩ0.01MΩ± (2.0% + 4 digits)

Overload Protection: 600V RMS

Continuity Test

Overload Protection Open Circuit Voltage Threshold (Appx.)

600V RMS <0.44V < 40Ω

Overload Protection: 600V RMS

Non Contact Voltage Detector

On Voltage

Appx. 25V AC and above

SYMBOLS USED ON LCD

AC Measurement DC Measurement

Negative DC Value

Auto Range Active

.L.

Overload: Range Exceeded Apo

Auto Power-Off Active

Low Battery

HOLD

Hold Active

Voltage Measurement

Current in Amps

Resistance in Ohms Continuity Test

Kilo 10

Mega 10

139680



WARRANTY

This product is warranted to be free from defects in materials and workmanship

for a period of two years from the date of purchase. During this warranty period,

Klein Tools has the option to repair or replace or refund the purchase price of

any unit which fails to conform to this warranty under normal use and service.

This warranty does not cover damage which occurs in shipment or failure which

results from alteration, tampering, accident, misuse, abuse, neglect, or improper

maintenance. Batteries and damage resulting from failed batteries are not

covered by warranty. A purchase receipt or other proof of original purchase date

will be required before warranty repairs will be rendered.

Any implied warranties, including but not limited to implied warranties of

merchantability and ﬁtness for a particular purpose, are limited to the express

warranty. Klein Tools shall not be liable for loss of use of the instrument or other

incidental or consequential damages, expenses, or economic loss, or for any

claim or claims for such damage, expenses or economic loss.

Some states or countries laws vary, so the above limitations or exclusions may

not apply to you. This warranty gives you speciﬁc legal rights, and you may also

have other rights which vary from state to state. If your Klein product requires

repair or for information on how to exercise your rights under the terms of this

warranty, please contact Klein Tools at 1-877-775-5346.

CLEANING

Turn instrument off and disconnect test leads. Clean the instrument by using

a damp cloth. Do not use abrasive cleaners or solvents.

STORAGE

Remove the batteries when instrument is not in use for a prolonged period of

time. Do not expose to high temperatures or humidity. After a period of storage

in extreme conditions exceeding the limits mentioned in the Speciﬁcations

section, allow the instrument to return to normal operating conditions before

using it.

DISPOSAL /RECYCLE

Caution: This symbol indicates that equipment and its accessories

shall be subject to a separate collection and correct disposal.

Test Equipment Depot - 800.517.8431

99 Washington Street Melrose, MA 02176

TestEquipmentDepot.com

Autres manuels pour CL3200

Table des matières

Autres manuels Klein Tools Instrument de mesure

Klein Tools

Klein Tools CL445 Manuel utilisateur

Klein Tools

Klein Tools DTL304 Manuel utilisateur

Klein Tools

Klein Tools VDV512-110 Manuel utilisateur

Klein Tools

Klein Tools CL800A Manuel utilisateur

Klein Tools

Klein Tools MM1300 Manuel utilisateur

Klein Tools

Klein Tools 93LDM100C Manuel utilisateur

Klein Tools

Klein Tools ET180 Manuel utilisateur

Klein Tools

Klein Tools ET50 Manuel utilisateur

Klein Tools

Klein Tools VDV500-123 Probe-Pro Manuel utilisateur

Klein Tools

Klein Tools NCVT-1 Manuel utilisateur

Klein Tools

Klein Tools ET920 Manuel utilisateur

Klein Tools

Klein Tools CL120VP Manuel utilisateur

Klein Tools

Klein Tools CL2500 Manuel utilisateur

Klein Tools

Klein Tools CL110 Manuel utilisateur

Klein Tools

Klein Tools 93LDM100C Manuel utilisateur

Klein Tools

Klein Tools ET160 Manuel utilisateur

Klein Tools

Klein Tools CL2200 Manuel utilisateur

Klein Tools

Klein Tools CL900 Manuel utilisateur

Klein Tools

Klein Tools ET900 Manuel utilisateur

Klein Tools

Klein Tools CL800 Manuel utilisateur

Klein Tools

Klein Tools ET920 Manuel utilisateur

Klein Tools

Klein Tools CL310 Manuel utilisateur

Klein Tools

Klein Tools CL210 Manuel utilisateur

Klein Tools

Klein Tools CL800E Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur