KitchenAid KHIS6503 Manuel utilisateur

Instructions for use

Installation diagrams 4

Important safety instructions 6

Safeguarding the environment 8

Declaration of conformity 8

Before use 8

Existing pots and pans 8

Recommended pot bottom widths 8

Installation 9

Electrical connection 9

Instructions for use 11

Cleaning 13

Troubleshooting guide 13

Noises made by the hob 13

After-Sales Service 14

Power level table 14

210 mm

145 mm

280 mm

Installation diagrams

Min. 10 cm

Min. 3 cm

Max. 6 cm

Min. 5 mm

Installation diagrams

483 mm

553 mm

30 mm

580

650

700 mm

510 mm

52 mm

R = Min. 6,5 mm

Max. 8 mm

490 mm

560 mm

Min. 50 mm

YOUR SAFETY AND THAT OF OTHERS IS VERY IMPORTANT

This manual and the appliance itself provide important safety messages,

to be read and always observed.

This is the danger symbol, regarding safety, warning of potential

risks to users and others.

All safety messages will be preceded by the danger symbol and

the following words:

Indicates a hazardous situation which, if

not avoided, will result in serious injury.

Indicates a hazardous situation which, if

not avoided, could cause serious injury.

All messages relevant to safety specify the potential risk to which they

refer and indicate how to reduce the risk of injury, damage and electric

shocks due to incorrect use of the appliance.

Make sure to comply with the following:

- Use protective gloves to perform all unpacking and installation

operations.

- The appliance must be disconnected from the power supply before

carrying out any installation operation.

- Installation and maintenance must be carried out by a specialised

technician, in compliance with the manufacturer’s instructions and the

local safety regulations in force. Do not repair or replace any part of

the appliance unless specifically stated in the user manual.

- The appliance must be earthed.

- The power cable must be long enough for connecting the appliance,

fitted in the cabinet, to the power supply.

- For installation to comply with the current safety regulations, an

omnipolar switch with minimum contact gap of 3mm is required.

- Do not use multi-sockets or extension cords.

- Do not pull the appliance’s power cable.

- The electrical parts must not be accessible to the user after installation.

- The appliance is designed solely for domestic use for cooking food.

No other use is permitted (e.g. heating rooms). The Manufacturer

declines any liability for inappropriate use or incorrect setting of the

controls.

WARNING

DANGER

IMPORTANT SAFETY INSTRUCTIONS

- The appliance and its accessible parts become hot during use. Care

should be taken to avoid touching heating elements. Very young (0-3

years) and young children (3-8 years) shall be kept away unless

continuously supervised.

- Children from 8 years and above and persons with reduced physical,

sensory or mental capabilities or lack of experience and knowledge

can use this appliance only if they are supervised or have been given

instructions on safe appliance use and if they understand the hazards

involved. Children shall not play with the appliance. Cleaning and

user maintenance shall not be made by children without supervision.

- Do not touch the appliance heating elements during and after use. Do

not allow the appliance to come into contact with cloths or other

flammable materials until all the components have cooled down

completely.

- Do not place flammable materials on or near the appliance.

- Overheated oils and fats catch fire easily. Pay attention when cooking

food products rich in fat and oil.

- A separator panel (not supplied) must be installed in the compartment

under the appliance.

- If the surface is cracked, switch off the appliance to avoid the

possibility of electric shock. (only for appliances with glass surface).

- The appliance is not intended to be operated by means of an external

timer or separate remote control system.

- Unattended cooking on a hob with fat or oil can be dangerous and

may result in fire. NEVER try to extinguish a fire with water, but

switch off the appliance and then cover flame e.g. with a lid or a fire

blanket.

Danger of fire: do not store items on the cooking surfaces.

- Do not use steam cleaners.

- Metallic objects such as knives, forks, spoons and lids should not be

placed on the hob surface since they can get hot.

- After use, switch off the hob element by its control and do not rely on

the pan detector. (only for appliances with glass surface).

Disposal of packing

The packing material is 100% recyclable and

marked with the recycling symbol . The various

parts of the packing must not be dispersed in the

environment, but disposed of in compliance with

local regulations.

Disposal

This appliance is marked in conformity with

European Directive 2002/96/EC on Waste

Electrical and Electronic Equipment (WEEE).

By ensuring that this appliance is correctly

disposed of, the user can help prevent potentially

negative consequences for the environment and the

health of people.

The symbol on the appliance or the

accompanying documentation indicates that this

product should not be treated as domestic waste but

must be taken to an appropriate collection point for

recycling WEEE.

Energy saving

For optimum results, it is advisable to:

• Use pots and pans with bottom width equal to

that of the cooking zone.

• Only use flat-bottomed pots and pans.

• When possible, keep pot lids on during cooking.

• Use a pressure cooker to to save even more

energy and time.

• Place the pot in the middle of the cooking zone

marked on the hob.

Safeguarding the environment

This appliance, has been designed, manufactured

and marketed in conformity with the safety

requirements of “Low Voltage” Directive

2006/95/EC (replacing 73/23/EEC as amended) and

protection requirements of “EMC” Directive

2004/108/EC.

Declaration of conformity n

IMPORTANT: The cooking zones will not switch on if pots are not the right size.

Only use pots bearing the symbol “INDUCTION SYSTEM” (Figure opposite).

Place the pot on the required cooking zone before switching the hob on.

Before use

Use a magnet to check if the pot is suitable for the induction hob: pots and pans are unsuitable if not

magnetically detectable.

- Make sure pots have a smooth bottom, otherwise they could scratch the hob. Check dishes.

- Never place hot pots or pans on the surface of the hob’s control panel. This could result in damage.

Existing pots and pans

OK NO

Recommended pot bottom widths

Ø 28 cm

Ø 17 cm min



28 cm max Ø 21 cm

Ø 15 cm min



21 cm max

Ø 14,5 cm

Ø 10 cm min



14,5 cm max

After unpacking the product, check for any damage during transport.

In case of problems, contact the dealer or the After-Sales Service.

For built-in dimensions and installation instruction, see the pictures in page 5.

PREPARING THE CABINET FOR FITTING

- Install a separator panel under the hob.

- The lower part of the product must not be accessible after installation.

- Do not fit the separator panel if an undertop oven is installed.

• The distance between the underside of the appliance and the separator

panel must respect the dimensions given in the figure.

• In order to ensure the correct operation of the product, do not obstruct

the minimum required clearance between the hob and the top of the unit

(min. 5 mm).

• If an undertop oven is installed, make sure the oven is equipped with a

cooling system.

• Do not install the hob above a dishwasher or washing-machine, so that

the electronic circuits do not come into contact with steam or moisture

which could damage them.

• In the case of flush-mounted installation, call the After-Sales Service to request assembly of screws kit

4801 211 00112.

• To remove the hob, use a screwdriver (not provided) to prise off the perimeter clips on the underside of

the appliance.

WARNING

min 5 mm

min 20 mm

min 5 mm

Installation

- Disconnect the appliance from the power supply.

- Installation must be carried out by qualified personnel who know the current safety and

installation regulations.

- The manufacturer declines all liability for injury to persons or animals and for damage to

property resulting from failure to observe the regulations provided in this chapter.

- The power cable must be long enough to allow the hob to be removed from the worktop.

- Make sure the voltage specified on the dataplate located on the bottom of the appliance is the

same as that of the home.

WARNING

Electrical connection

CBA

Wires Number x size

220-240 V ~ +

3 x 4 mm2

230-240 V ~ +

3 x 4 mm2(Australia only)

220-240 V 3 ~ +

4 x 1,5 mm2

380-415 V 3N ~ +

5 x 1,5 mm2

380-415 V 2N ~ +

4 x 1,5 mm2

380-415 V 3N ~ 220-240 V ~ 230-240 V ~ (Australia only)

220-240 V ~ (UK only)

380-415 V 2N ~ 220-240 V 3 ~

(Belgium only)

380-415 V 2N ~

(NL only)

Connection to the terminal block

For the electrical connection, use an H05RR-F or H05V2V2-F cable as specified in the table below.

Electrical connection

Important:

- Based on the wiring diagram (see figure) either keep or remove the metal jumpers between the screws

on the terminal block L1-L2 and N1-N2.

- If the cable is provided, see the connection instructions attached to the cable.

- Make sure all six screws on the terminal block are tightened after connecting the cables.

Example of jumper present (left) or removed (right). See the wiring diagram for details (the jumpers can be

between L1-L2 and between N1-N2).

Connect the yellow/green earth wire to the terminal with the symbol .

This wire must be longer than the other wires.

1. Remove the terminal block cover (A), undoing the screw and inserting the cover in the terminal block

hinge (B).

2. Insert the power cable in the cable clamp and connect the wires to the terminal block as indicated in the

connection diagram located near it.

3. Secure the power cable with the cable clamp.

4. Close the cover (C) and screw it on the terminal block with the previously removed screw.

Each time the power is connected, the hob performs an automatic check for a few seconds.

If the hob already has a power cable, follow the instructions attached to the cable. Connect the appliance to

the power supply by means of a multipole switch with minimum contact gap of 3mm.

Table des matières

Autres manuels KitchenAid Appareils de cuisine

KitchenAid

KitchenAid KAC-22 Manuel utilisateur

KitchenAid

KitchenAid KST4054 Manuel utilisateur

KitchenAid

KitchenAid KSMSFTA Manuel utilisateur

KitchenAid

KitchenAid KPS2CL Manuel utilisateur

KitchenAid

KitchenAid KHBC212 Manuel utilisateur

KitchenAid

KitchenAid KF26M22 Manuel utilisateur

KitchenAid

KitchenAid ARTISAN KEA28AMANA Manuel utilisateur

KitchenAid

KitchenAid KGMA Guide rapide

KitchenAid

KitchenAid KSMMGA Manuel utilisateur

KitchenAid

KitchenAid Classic Manuel utilisateur

KitchenAid

KitchenAid KMC4241 Instructions de montage

KitchenAid

KitchenAid KSM2CB5 Manuel utilisateur

KitchenAid

KitchenAid KHIP365510 Manuel utilisateur

KitchenAid

KitchenAid KSS1121 Manuel utilisateur

KitchenAid

KitchenAid 5KMC4244 Manuel utilisateur

KitchenAid

KitchenAid 5KHB2571 Manuel utilisateur

KitchenAid

KitchenAid 5KGM Manuel utilisateur

KitchenAid

KitchenAid KUBL204E Manuel utilisateur

KitchenAid

KitchenAid KSM2SCA Manuel utilisateur

KitchenAid

KitchenAid 5KSMMGA Manuel utilisateur

KitchenAid

KitchenAid KSMVSA Manuel utilisateur

KitchenAid

KitchenAid KPCA Guide rapide

KitchenAid

KitchenAid 5KSMSSA Manuel utilisateur

KitchenAid

KitchenAid KVXXX 14600 Manuel utilisateur

Manuels Appareils de cuisine populaires d'autres marques

Tayama

Tayama TYG-35AF Manuel utilisateur

AEG

AEG 43172V-MN Manuel utilisateur

REBER

REBER Professional 40 Guide de l'utilisateur

North American

North American BB12482G / TR-F-04-B-NCT-1 Manuel utilisateur

Presto

Presto fountain popper Manuel utilisateur

Westmark

Westmark 1035 2260 Manuel utilisateur

Zanussi

Zanussi ZCG64396XA Manuel utilisateur

HOFFEN

HOFFEN SM-9302M Manuel utilisateur

Philips

Philips HD3133 Manuel utilisateur

Ronco

Ronco Beef Jerky Manuel utilisateur

Hendi

Hendi 470411 Manuel utilisateur

Livoo

Livoo MEN386 Manuel utilisateur

Vogue

Vogue D446 Manuel utilisateur

croydon

croydon WR-10313-700 Manuel utilisateur

ADE

ADE AUTOMATIC-L Manuel utilisateur

Chefman

Chefman RJ43-SQ Series Manuel utilisateur

Vacmaster

Vacmaster VP680 Manuel utilisateur

Jetmaster

Jetmaster 900HG Manuel utilisateur