Keysight Technologies U4301 Manuel utilisateur

Keysight U4301 PCIe Gen3

Analyzer

User’s Guide

2Keysight U4301 PCIe Gen3 Analyzer User’s Guide

Notices

No part of this manual may be reproduced in

any form or by any means (including elec-

tronic storage and retrieval or translation

into a foreign language) without prior agree-

ment and written consent from Keysight

Technologies as governed by United States

and international copyright laws.

Trademarks

UNIX is a registered trademark of UNIX Sys-

tem Laboratories in the U.S.A. and other

countries. Target is copyrighted by Thru-Put

Systems, Inc.

Manual Part Number

U4301-97001

Edition

May 2017

Available in electronic format only

Keysight Technologies

1900 Garden of the Gods Road

Colorado Springs, CO 80907 USA

Warranty

THE MATERIAL CONTAINED IN THIS

DOCUMENT IS PROVIDED "AS IS," AND IS

SUBJECT TO BEING CHANGED, WITHOUT

NOTICE, IN FUTURE EDITIONS. FURTHER,

TO THE MAXIMUM EXTENT PERMITTED BY

APPLICABLE LAW, KEYSIGHT DISCLAIMS

ALL WARRANTIES, EITHER EXPRESS OR

IMPLIED WITH REGARD TO THIS MANUAL

AND ANY INFORMATION CONTAINED

HEREIN, INCLUDING BUT NOT LIMITED TO

THE IMPLIED WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE. KEYSIGHT SHALL

NOT BE LIABLE FOR ERRORS OR FOR

INCIDENTAL OR CONSEQUENTIAL

DAMAGES IN CONNECTION WITH THE

FURNISHING, USE, OR PERFORMANCE OF

THIS DOCUMENT OR ANY INFORMATION

CONTAINED HEREIN. SHOULD KEYSIGHT

AND THE USER HAVE A SEPARATE WRITTEN

AGREEMENT WITH WARRANTY TERMS

COVERING THE MATERIAL IN THIS

DOCUMENT THAT CONFLICT WITH THESE

TERMS, THE WARRANTY TERMS IN THE

SEPARATE AGREEMENT WILL CONTROL.

Technology Licenses

The hardware and/or software described in

this document are furnished under a license

and may be used or copied only in accor-

dance with the terms of such license.

U.S. Government Rights

The Software is "commercial computer soft-

ware," as defined by Federal Acquisition

Regulation ("FAR") 2.101. Pursuant to FAR

12.212 and 27.405-3 and Department of

Defense FAR Supplement ("DFARS")

227.7202, the U.S. government acquires

commercial computer software under the

same terms by which the software is cus-

tomarily provided to the public. Accordingly,

Keysight provides the Software to U.S. gov-

ernment customers under its standard com-

mercial license, which is embodied in its

End User License Agreement (EULA), a copy

of which can be found at http://www.key-

sight.com/find/sweula. The license set

forth in the EULA represents the exclusive

authority by which the U.S. government may

use, modify, distribute, or disclose the Soft-

ware. The EULA and the license set forth

therein, does not require or permit, among

other things, that Keysight: (1) Furnish tech-

nical information related to commercial

computer software or commercial computer

software documentation that is not custom-

arily provided to the public; or (2) Relinquish

to, or otherwise provide, the government

rights in excess of these rights customarily

provided to the public to use, modify, repro-

duce, release, perform, display, or disclose

commercial computer software or commer-

cial computer software documentation. No

additional government requirements beyond

those set forth in the EULA shall apply,

except to the extent that those terms, rights,

or licenses are explicitly required from all

providers of commercial computer software

pursuant to the FAR and the DFARS and are

set forth specifically in writing elsewhere in

the EULA. Keysight shall be under no obliga-

tion to update, revise or otherwise modify

the Software. With respect to any technical

data as defined by FAR 2.101, pursuant to

FAR 12.211 and 27.404.2 and DFARS

227.7102, the U.S. government acquires no

greater than Limited Rights as defined in

FAR 27.401 or DFAR 227.7103-5 (c), as

applicable in any technical data.

Safety Notices

CAUTION

A CAUTION notice denotes a hazard. It

calls attention to an operating proce-

dure, practice, or the like that, if not

correctly performed or adhered to,

could result in damage to the product

or loss of important data. Do not pro-

ceed beyond a CAUTION notice until

the indicated conditions are fully

understood and met.

WARNING

A WARNING notice denotes a hazard.

It calls attention to an operating pro-

cedure, practice, or the like that, if not

correctly performed or adhered to,

could result in personal injury or

death. Do not proceed beyond a

WARNING notice until the indicated

conditions are fully understood and

met.

Keysight U4301 PCIe Gen3 Analyzer User’s Guide 3

Safety Summary

The following general safety precautions must be observed during all phases of operation of this

instrument. Failure to comply with these precautions or with specific warnings or operating

instructions in the product manuals violates safety standards of design, manufacture, and intended

use of the instrument. Keysight Technologies assumes no liability for the customer's failure to comply

with these requirements. Product manuals are provided with your instrument on CD-ROM and/or in

printed form. Printed manuals are an option for many products. Manuals may also be available on

the Web. Go to www.keysight.com and type in your product number in the Search field at the top of

the page.

General Do not use this product in any manner not specified by the manufacturer. The protective features of

this product may be impaired if it is used in a manner not specified in the operation instructions.

Before Applying

Power

Verify that all safety precautions are taken. Make all connections to the unit before applying power.

Note the instrument's external markings described in “Safety Symbols”.

Ground the

Instrument

If your product is provided with a grounding type power plug, the instrument chassis and cover must

be connected to an electrical ground to minimize shock hazard. The ground pin must be firmly

connected to an electrical ground (safety ground) terminal at the power outlet. Any interruption of

the protective (grounding) conductor or disconnection of the protective earth terminal will cause a

potential shock hazard that could result in personal injury.

Fuses See the user's guide or operator's manual for information about line-fuse replacement. Some

instruments contain an internal fuse, which is not user accessible.

Do Not Operate in

an Explosive

Atmosphere

Do not operate the instrument in the presence of flammable gases or fumes.

Do Not Remove the

Instrument Cover

Only qualified, service-trained personnel who are aware of the hazards involved should remove

instrument covers. Always disconnect the power cable and any external circuits before removing the

instrument cover.

Cleaning Clean the outside of the instrument with a soft, lint-free, slightly dampened cloth. Do not use

detergent or chemical solvents.

Do Not Modify the

Instrument

Do not install substitute parts or perform any unauthorized modification to the product. Return the

product to a Keysight Sales and Service Office for service and repair to ensure that safety features

are maintained.

In Case of Damage Instruments that appear damaged or defective should be made inoperative and secured against

unintended operation until they can be repaired by qualified service personnel.

CAUTION

A CAUTION notice denotes a hazard. It calls attention to an operating procedure, practice,

or the like that, if not correctly performed or adhered to, could result in damage to the

product or loss of important data. Do not proceed beyond a CAUTION notice until the

indicated conditions are fully understood and met.

WARNING

A WARNING notice denotes a hazard. It calls attention to an operating procedure,

practice, or the like that, if not correctly performed or adhered to, could result in

personal injury or death. Do not proceed beyond a WARNING notice until the indicated

conditions are fully understood and met.

4Keysight U4301 PCIe Gen3 Analyzer User’s Guide

Safety Symbols

Table 1 Safety Symbol

Symbol Description

Direct current

Alternating current

Both direct and alternating current

Three phase alternating current

Earth ground terminal

Protective earth ground terminal

Frame or chassis ground terminal

Terminal is at earth potential

Equipotentiality

N Neutral conductor on permanently

installed equipment

L Line conductor on permanently installed

equipment

On (mains supply)

Off (mains supply)

Standby (mains supply). The instrument is

not completely disconnected from the

mains supply when the power switch is in

the standby position

In position of a bi-stable push switch

Keysight U4301 PCIe Gen3 Analyzer User’s Guide 5

Out position of a bi-stable push switch

Equipment protected throughout by

DOUBLE INSULATION or REINFORCED

INSULATION

Caution, refer to accompanying

documentation

Caution, risk of electric shock

Do not apply around or remove from

HAZARDOUS LIVE conductors

Application around and removal from

HAZARDOUS LIVE conductors is

permitted

Caution, hot surface

Ionizing radiation

Indicates that antistatic precautions

should be taken

CAT I IEC Measurement Category I

CAT II Measurement Category II

CAT III Measurement Category III

CAT IV Measurement Category IV

Symbol Description

6Keysight U4301 PCIe Gen3 Analyzer User’s Guide

Compliance and Environmental Information

Table 2 Compliance and Environmental Information

Safety Symbol Description

CSA is the Canadian certification mark to demonstrate compliance with the Safety

requirements.

The C-tick mark is a registered trademark of the Spectrum Management Agency of

Australia. This signifies compliance with the Australia EMC Framework regulations

under the terms of the Radio Communication Act of 1992.

CE compliance marking to the EU Safety and EMC Directives.

ISM GRP-1A classification according to the international EMC standard.

ICES/NMB-001 compliance marking to the Canadian EMC standard.

KC certification mark to demonstrate compliance with the South Korean EMC

requirements.

South Korean Class A EMC declaration

This equipment is Class A suitable for professional use and is for use in

electromagnetic environments outside of the home.

This product complies with the WEEE Directive (2002/96/EC) marking requirements.

The affixed label indicates that you must not discard this electrical/ electronic

product in domestic household waste.

Product Category: With reference to the equipment types in WEEE Directive Annex I,

this product is classified as a “Monitoring and Control instrumentation product”.

Do not dispose in household waste.

To return unwanted products, contact your local Keysight office, or see

www.keysight.com/environment/product/ for more information.

Keysight U4301 PCIe Gen3 Analyzer User’s Guide 7

U4301A/B PCIe Gen3 Analyzer—At a Glance

The U4301A/B PCIe Gen3 analyzer lets you capture and decode PCI Express 3.0 (PCIe 3.0) data and

view it in a Protocol Viewer window. The protocol analyzer supports all PCIe 3.0 speeds, including 2.5

GT/s (Gen1) and 5.0 GT/s (Gen2) through PCIe 8 GT/s (Gen3), and it supports link widths from x1 to

x16.

The U4301B PCIe Gen3 analyzer provides enhanced PCIe Gen3 features over the U4301A analyzer.

You can install the U4301B module in a Keysight AXIe chassis (for example, the M9502A 2 slot

chassis). The U4301A module can be installed in a Keysight Digital Test Console chassis (for

example, the U4002A portable 2-slot chassis) or a Keysight AXIe chassis (for example, the M9502A 2

slot chassis).

When a controller PC is connected to a Keysight chassis via an external PCIe interface and cable, the

Keysight Logic and Protocol Analyzer application (running on the controller PC) lets you connect to

the chassis, set up U4301A/B PCIe Gen3 analyzer data captures, and perform analysis.

The U4301A/B PCIe Gen3 analyzer provides:

Effective presentation of protocol interactions from physical layer to transaction layer:

• Industry standard spreadsheet format protocol viewer with:

• Highlighting by packet type or direction.

• Easy flow columns to better understand the stimulus and response nature of the protocols.

• Context sensitive columns to show only the relevant information, minimizing the need to

scroll horizontally.

• Flexible GUI configuration to meet debug needs, with pre-defined GUI layouts for Link Training

debug, Config accesses, and general I/O.

Simple and powerful state-based triggering:

• New simple trigger mode makes it easy to setup single event triggers.

• Powerful state-based triggering including:

• Four states supported in trigger sequencer.

• Triggering on patterns (ordered set patterns or packet types).

• Internal counters and timers.

• Triggering on an ordered set on a specific lane.

• External trigger in/out.

Powerful hardware features ensure capture of important transition events:

• Dual phase lock loops (PLLs) per direction ensuring that the analyzer will lock on speed change

events quickly and not miss any critical data.

NOTE

You can upgrade your U4301A module and enhance its PCIe Gen3 features by using the System

level upgrade license (U4301U-GFP). This license includes a system level upgrade of the U4301A

module to match the features available with the latest U4301B module. This upgrade includes 8

GB Capture Buffer, LTSSM Viewer, Transaction Decoder, and Offline Performance Summary

features.

If there are multiple U4301A modules in a chassis, then installing the System Level Upgrade

license on one of these modules enables features such as LTSSM Viewer, Transaction Decoder,

and Offline Performance Summary on all the U4301A modules in the chassis. The capture buffer,

however, is upgraded only for the U4301A module on which the system level upgrade license has

been installed and not for all the U4301A modules in the chassis.

8Keysight U4301 PCIe Gen3 Analyzer User’s Guide

• 8 GB capture buffer for a U4301B module. 4 GB capture buffer for a U4301A module. This can be

upgraded to 8 GB if the System Level Upgrade license is installed on the U4301A module.

• PCIe Gen1 x4 link to the host PC, provides up to 10 Gbps of data download.

• LEDs to show lane status and speed for fast understanding of current link status.

Cross-triggering with an external oscilloscope and making time-correlated measurements (using

markers).

• You can display data captured by the oscilloscope in the Waveform and Listing display windows.

This external oscilloscope correlation and data display feature is also referred to as View Scope.

To know more about this feature and how to use it with the U4301 Analyzer, refer to the External

Oscilloscope Time Correlation and Data Display Online Help.

See •"Using the PCIe Gen3 Analyzer" on page 9

Keysight U4301 PCIe Gen3 Analyzer User’s Guide 9

Using the PCIe Gen3 Analyzer

For an overview and list of features, see: "U4301A/B PCIe Gen3 Analyzer—At a Glance" on page 7

•Chapter1,"Hardware and Software Installation" on page 17

•Chapter2,"Probing Options for PCIe Gen3" on page 19

•Chapter3,"Specifying the Connection Setup" on page 21

•Chapter4,"Setting the Capture Options" on page 33

•Chapter5,"Tuning the Analyzer for a Specific DUT" on page 37

•Chapter6"Setting Up Triggers" on page 55

•Chapter7"Running/Stopping Captures" on page 71

•Chapter8,"Viewing PCIe Gen3 Packets and Traffic Overview" on page 73

•Chapter9,"Viewing and Interpreting Equalization Summary Data" on page 106

• Chapter 10, "Configuring and Computing Decoded Transactions" on page 115

• Chapter 11 "Viewing Offline Performance Summary" on page 157

See Also • U4305 PCIe Gen3 exerciser documentation.

10 Keysight U4301 PCIe Gen3 Analyzer User’s Guide

Table des matières

Autres manuels Keysight Technologies Instrument de mesure

Keysight Technologies

Keysight Technologies N9029AV01-V15 Manuel utilisateur

Keysight Technologies

Keysight Technologies P50 B Series Manuel utilisateur

Keysight Technologies

Keysight Technologies E5055A SSA-X Manuel utilisateur

Keysight Technologies

Keysight Technologies U1701B Manuel utilisateur

Keysight Technologies

Keysight Technologies E2655C Manuel utilisateur

Keysight Technologies

Keysight Technologies N5290/1A PNA Series Manuel utilisateur

Keysight Technologies

Keysight Technologies N5221B Manuel utilisateur

Keysight Technologies

Keysight Technologies E4980A Manuel utilisateur

Keysight Technologies

Keysight Technologies M9451A Guide de l'utilisateur

Keysight Technologies

Keysight Technologies B1500A Guide d'installation

Keysight Technologies

Keysight Technologies X Series Manuel utilisateur

Keysight Technologies

Keysight Technologies N9000B Manuel d'installation et d'exploitation

Keysight Technologies

Keysight Technologies B2900A Series Manuel utilisateur

Keysight Technologies

Keysight Technologies U5309A Guide de l'utilisateur

Keysight Technologies

Keysight Technologies 1130B Series Manuel utilisateur

Keysight Technologies

Keysight Technologies CXA Manuel d'installation et d'exploitation

Keysight Technologies

Keysight Technologies 16089A Manuel d'utilisation

Keysight Technologies

Keysight Technologies 16861A Manuel utilisateur

Keysight Technologies

Keysight Technologies N437 Series Instructions d'installation et d'utilisation

Keysight Technologies

Keysight Technologies B1500A Mode d’emploi

Keysight Technologies

Keysight Technologies N5241B Manuel d'installation et d'exploitation

Keysight Technologies

Keysight Technologies N9000A Manuel d'installation et d'exploitation

Keysight Technologies

Keysight Technologies FieldFox B Series Manuel utilisateur

Keysight Technologies

Keysight Technologies C Series Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur