Keysight Technologies E5072A Manuel utilisateur

Installation Guide

Keysight E5072A

Network Analyzer

Notices

2011-2019

No part of this manual may be

reproduced in any form or by any

means (including electronic storage

and retrieval or translation into a

foreign language) without prior

agreement and written consent from

Keysight Technologies, Inc. as

governed by United States and

international copyright laws.

Trademark Acknowledgments

Manual Part Number

E5072-90000

Edition

Edition 4, May 2019

Printed in Malaysia

Published by:

Keysight Technologies International

Japan G.K,

1-3-3 Higashikawasaki-cho

Chuo-ku

Kobe-shi, Hyogo, Japan

Warranty

THE MATERIAL CONTAINED IN THIS

DOCUMENT IS PROVIDED “AS IS,”

AND IS SUBJECT TO BEING

CHANGED, WITHOUT NOTICE, IN

FUTURE EDITIONS. FURTHER, TO

THE MAXIMUM EXTENT PERMITTED

BY APPLICABLE LAW, KEYSIGHT

DISCLAIMS ALL WARRANTIES,

EITHER EXPRESS OR IMPLIED WITH

REGARD TO THIS MANUAL AND

ANY INFORMATION CONTAINED

HEREIN, INCLUDING BUT NOT

LIMITED TO THE IMPLIED

WARRANTIES OF

MERCHANTABILITY AND FITNESS

FOR A PARTICULAR PURPOSE.

KEYSIGHT SHALL NOT BE LIABLE

FOR ERRORS OR FOR INCIDENTAL

OR CONSEQUENTIAL DAMAGES IN

CONNECTION WITH THE

FURNISHING, USE, OR

PERFORMANCE OF THIS

DOCUMENT OR ANY INFORMATION

CONTAINED HEREIN. SHOULD

KEYSIGHT AND THE USER HAVE A

SEPARATE WRITTEN AGREEMENT

WITH WARRANTY TERMS

COVERING THE MATERIAL IN THIS

DOCUMENT THAT CONFLICT WITH

THESE TERMS, THE WARRANTY

TERMS IN THE SEPARATE

AGREEMENT WILL CONTROL.

Technology Licenses

The hardware and/or software

described in this document are

furnished under a license and may be

used or copied only in accordance

with the terms of such license.

Declaration of Conformity

Declarations of Conformity for this

product and for other Keysight

products may be downloaded from

the Web. Go to

http://www.keysight.com/go/confor

mity. You can then search by product

number to find the latest Declaration

of Conformity.

U.S. Government Rights

The Software is “commercial

computer software,” as defined by

Federal Acquisition Regulation

(“FAR”) 2.101. Pursuant to FAR

12.212 and 27.405-3 and

Department of Defense FAR

Supplement (“DFARS”) 227.7202, the

U.S. government acquires

commercial computer software

under the same terms by which the

software is customarily provided to

the public. Accordingly, Keysight

provides the Software to U.S.

government customers under its

standard commercial license, which

is embodied in its End User License

Agreement (EULA), a copy of which

can be found at

http://www.keysight.com/find/sweu

la The license set forth in the EULA

represents the exclusive authority by

which the U.S. government may use,

modify, distribute, or disclose the

Software. The EULA and the license

set forth therein, does not require or

permit, among other things, that

Keysight: (1) Furnish technical

information related to commercial

computer software or commercial

computer software documentation

that is not customarily provided to

the public; or (2) Relinquish to, or

otherwise provide, the government

rights in excess of these rights

customarily provided to the public to

use, modify, reproduce, release,

perform, display, or disclose

commercial computer software or

commercial computer software

documentation. No additional

government requirements beyond

those set forth in the EULA shall

apply, except to the extent that those

terms, rights, or licenses are

explicitly required from all providers

of commercial computer software

pursuant to the FAR and the DFARS

and are set forth specifically in

writing elsewhere in the EULA.

Keysight shall be under no obligation

to update, revise or otherwise modify

the Software. With respect to any

technical data as defined by FAR

2.101, pursuant to FAR 12.211 and

27.404.2 and DFARS 227.7102, the

U.S. government acquires no greater

than Limited Rights as defined in FAR

27.401 or DFAR 227.7103-5 (c), as

applicable in any technical data.

Safety Notices

A CAUTION notice denotes a hazard. It

calls attention to an operating

procedure, practice, or the like that,

if not correctly performed or adhered

to, could result in damage to the

product or loss of important data. Do

not proceed beyond a CAUTION

notice until the indicated conditions

are fully understood and met.

A WARNING notice denotes a hazard.

It calls attention to an operating

procedure, practice, or the like that,

if not correctly performed or adhered

to, could result in personal injury or

death. Do not proceed beyond a

WARNING notice until the indicated

conditions are fully understood and

met.

Keysight E5072A Network Analyzer

Installation Guide

Caution

Safety Summary

When you notice any of the unusual conditions listed below, immediately

terminate operation and disconnect the power cable.

Contact your local Keysight Technologies sales representative or authorized

service company for repair of the instrument. If you continue to operate

without repairing the instrument, there is a potential fire or shock hazard to the

operator.

• Instrument operates abnormally.

• Instrument emits abnormal noise, smell, smoke or a spark-like light during

operation.

• Instrument generates high temperature or electrical shock during

operation.

• Power cable, plug, or receptacle on instrument is damaged.

• Foreign substance or liquid has fallen into the instrument.

Do not exceed the operating input power, voltage, and current level and signal

type appropriate for the instrument being used, refer to your instrument’s

Function Reference.

Electrostatic discharge (ESD) can damage the highly sensitive microcircuits in

your instrument. ESD damage is most likely to occur as the test fixtures are

being connected or disconnected. Protect them from ESD damage by wearing

a grounding strap that provides a high resistance path to ground. Alternatively,

ground yourself to discharge any static charge built-up by touching the outer

shell of any grounded instrument chassis before touching the test port

connectors.

4 Keysight E5072A Network Analyzer

Caution

Manufacturer’s Declaration

Regulatory Compliance Information

This product complies with the essential requirements of the following

applicable European Directives, and carries the CE marking accordingly:

• The Low Voltage Directive 2006/95/EC

• The EMC Directive 2004/108/EEC

To obtain Declaration of Conformity, please contact your local Keysight

Technologies sales office, agent or distributor.

Herstellerbescheinigung

GERA- USCHEMISSION

LpA < 70 dB

am Arbeitsplatz

normaler Betrieb

nach DIN 45635 T. 19

Manufacturer’s Declaration

ACOUSTIC NOISE EMISSION

LpA < 70 dB

operator position

normal operation

per ISO 7779

Keysight E5072A Network Analyzer 5

Caution

Safety Notice Supplement

• This equipment complies with EN/IEC61010-1:2001.

• This equipment is of MEASUREMENT CATEGORY I (CAT I). Do not use for

CAT II, III, or IV.

• Do not connect the measuring terminals to mains.

• This equipment is a POLLUTION DEGREE 2, INDOOR USE product.

• This equipment is tested in stand-alone condition and in combination with

the accessories supplied by Keysight Technologies against the requirement

of the standards described in the Declaration of Conformity. If it is used as a

system component, compliance of related regulations and safety

requirements are to be confirmed by the builder of the system.

6 Keysight E5072A Network Analyzer

Caution

General Safety Precautions

The following general safety precautions must be observed during all phases of

operation, service, and repair of this instrument. Failure to comply with these

precautions or with specific WARNINGS elsewhere in this manual may impair

the protection provided by the equipment. Such noncompliance would also

violate safety standards of design, manufacture, and intended use of the

instrument. Keysight Technologies assumes no liability for the customer’s

failure to comply with these precautions.

• Ground the Instrument

To avoid electric shock, the instrument chassis and cabinet must be

grounded with the supplied power cable’s grounding prong.

• Do NOT Operate in an Explosive Atmosphere

Do not operate the instrument in the presence of inflammable gases or

fumes. Operation of any electrical instrument in such an environment

clearly constitutes a safety hazard.

• Keep Away from Live Circuits

Operators must not remove instrument covers. Component replacement

and internal adjustments must be made by qualified maintenance

personnel. Do not replace components with the power cable connected.

Under certain conditions, dangerous voltage levels may remain even after

the power cable has been disconnected. To avoid injuries, always

disconnect the power and discharge circuits before touching them.

• DO NOT Service or Adjust the Instrument Alone

Do not attempt internal service or adjustment unless another person,

capable of rendering first aid and resuscitation, is present.

• Do NOT Substitute Parts or Modify the Instrument

To avoid the danger of introducing additional hazards, do not install

substitute parts or perform unauthorized modifications to the instrument.

Return the instrument to a Keysight Technologies Sales and Service Office

for service and repair to ensure that safety features are maintained in

operational condition.

The E5072A complies with INSTALLATION CATEGORY II as well as

POLLUTION DEGREE 2 in IEC61010-1. The E5072A is an INDOOR USE

product.

The LEDs in the E5072A are Class 1 in accordance with IEC60825-1,

CLASS 1 LED PRODUCT.

Keysight E5072A Network Analyzer 7

Caution

Safety Symbols

• Dangerous Procedure Warnings

Warnings, such as the example below, precede potentially dangerous

procedures throughout this manual. Instructions contained in the warnings

must be followed.

Safety Symbols

General definitions of safety symbols used on the instrument or in manuals are

listed below.

Certification

Keysight Technologies certifies that this product met its published

specifications at the time of shipment from the factory. Keysight Technologies

further certifies that its calibration measurements are traceable to the United

States National Institute of Standards and Technology, to the extent allowed

by the Institution’s calibration facility or by the calibration facilities of other

International Standards Organization members.

Dangerous voltage levels, capable of causing death, are present in this

instrument. Use extreme caution when handling, testing, and adjusting

this instrument.

Instruction Manual symbol: the product is marked with this

symbol when it is necessary for the user to refer to the instrument

manual.

Alternating current.

Direct current.

On (Supply).

Off (Supply).

A chassis terminal; a connection to the instrument’s chassis,

which includes all exposed metal structure.

Standby.

8 Keysight E5072A Network Analyzer

Caution

Safety Symbols

Documentation Warranty

The material contained in this document is provided “as is,” and is subject to

being changed, without notice, in future editions. Further, to the maximum

extent permitted by applicable law, Keysight disclaims all warranties, either

express or implied with regard to this manual and any information contained

herein, including but not limited to the implied warranties of merchantability

and fitness for a particular purpose. Keysight shall not be liable for errors or for

incidental or consequential damages in connection with the furnishing, use, or

performance of this document or any information contained herein. Should

Keysight and the user have a separate written agreement with warranty terms

covering the material in this document that conflict with these terms, the

warranty terms in the separate agreement will control.

Exclusive Remedies

The remedies provided herein are Buyer’s sole and exclusive remedies.

Keysight Technologies shall not be liable for any direct, indirect, special,

incidental, or consequential damages, whether based on contract, tort, or any

other legal theory.

Assistance

Product maintenance agreements and other customer assistance agreements

are available for Keysight Technologies products.

For any assistance, contact your nearest Keysight Technologies Sales and

Service Office. Addresses are provided at the back of this manual.

Keysight E5072A Network Analyzer 9

Caution

Manuals for E5072A

Keysight provides the following three manuals for E5072A. The latest version of

all documentations can be downloaded from

http://www.keysight.com/manual/e5072a.

Installation Guide

The installation guide (this manual) provides start up setup information when

you use the E5072A for the first time and troubleshooting information when the

Windows cannot be boot up. See this manual first when you use the E5072A

for the first time.

Online Help

The online help provides the information about the quick start, measurement

operation, programming, built-in VBA, I/O interface This is pre-installed in the

E5072A. Press [Help] hard key on the front panel to open. Quick Start helps in

understanding the E5072A operation quickly.

The latest version of online help is available at:

http://www.keysight.com/manuals/e5072a.

The online help has context sensitive help, which is a great feature of the

E5072A help. It allows you to get information about the selected softkey by

pressing the Help key in the E5072A or by pressing F1 in a keyboard attached

to the E5072A or by clicking the help button in a dialog box. With context

sensitive help, users can receive information quickly about the area the user is

working in the firmware of the E5072A. It provides information relevant to the

task that needs to be accomplished and reduces the time to search relevant

information required to complete a task.

Service Guide

The service manual provides information about the parts, troubleshooting,

performance test, adjustment and service menu.

10 Keysight E5072A Network Analyzer

Caution

Manuals for E5072A

Autres manuels pour E5072A

Table des matières

Autres manuels Keysight Technologies Instrument de mesure

Keysight Technologies

Keysight Technologies U1733C Manuel utilisateur

Keysight Technologies

Keysight Technologies MXA N9020A Manuel d'installation et d'exploitation

Keysight Technologies

Keysight Technologies LTE Manuel d'installation

Keysight Technologies

Keysight Technologies EXA N9010B Guide de démarrage rapide

Keysight Technologies

Keysight Technologies B2901A Manuel utilisateur

Keysight Technologies

Keysight Technologies M9393A Guide de démarrage rapide

Keysight Technologies

Keysight Technologies E4417A Manuel utilisateur

Keysight Technologies

Keysight Technologies B1500A Mode d’emploi

Keysight Technologies

Keysight Technologies U5303A Guide de l'utilisateur

Keysight Technologies

Keysight Technologies PNA Series Manuel utilisateur

Keysight Technologies

Keysight Technologies 34959A Manuel utilisateur

Keysight Technologies

Keysight Technologies UXA Manuel d'installation et d'exploitation

Keysight Technologies

Keysight Technologies FieldFox N9912A Manuel du propriétaire

Keysight Technologies

Keysight Technologies B1500A Manuel utilisateur

Keysight Technologies

Keysight Technologies N7373C Manuel

Keysight Technologies

Keysight Technologies E5080B Manuel utilisateur

Keysight Technologies

Keysight Technologies X Series Manuel utilisateur

Keysight Technologies

Keysight Technologies N9029AV01-V15 Manuel utilisateur

Keysight Technologies

Keysight Technologies PXA N9030A Manuel d'installation et d'exploitation

Keysight Technologies

Keysight Technologies M9203A Guide rapide

Keysight Technologies

Keysight Technologies FieldFox N9927-90002 Manuel utilisateur

Keysight Technologies

Keysight Technologies i7090 Manuel utilisateur

Keysight Technologies

Keysight Technologies S9106AC-2IF Guide de l'utilisateur

Keysight Technologies

Keysight Technologies U2020 X Series Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur