Key Digital FatCAT KD-CATHD250Lite Manuel utilisateur

HDBT/HDMI “Lite” via Single CAT5e/6 (Tx/Rx)

Extenders with Full Buffer System, IR

HDBT/HDMI “Lite POE” via Single CAT5e/6 (Tx/Rx)

Extenders with Full Buffer System, IR, Power Over Ethernet

The Experts in Digital Video Technology and Solutions™

KD-CATHD250Lite

KD-CATHD250POE

Key Digital®Systems :: 521 East 3rd Street :: Mount Vernon, NY 10553

Phone : 914.667.9700 Fax : 914.668.8666 Web : www.keydigital.com

Rev 0 – May 2013

Key Digital

, led by digital video pioneer Mike Tsinberg,

develops and manufactures high quality, cutting-edge

technology solutions for virtually all applications where

high quality video imaging is important. Key Digital

is at the forefront of the video industry for Home

Theater Retailers, Custom Installers, System Integrators,

Broadcasters, Manufacturers, and Consumers.

Setup Guide

KD-CATHD250Lite_Manual.indd 2-3 7/24/13 4:39 PM

4 1

Please read all instructions to insure safe operation of the product.

CAT6/STP CABLING IS STRONGLY RECOMMENDED FOR OPTIMUM

SIGNAL TRANSMISSION, ESPECIALLY IN HARSH ENVIRONMENTS

You MUST use the Power Supply provided with your unit or you VOID

the Key Digital

Warranty and risk damage to your unit and associated

equipment.

About KD-CATHD250Lite/POE

The FatCAT Series

™

KD-CATHD250Lite/POE allow extension of 1080p/60, 1920x1200,

3D signals up to 200 ft. on CAT5e/UTP; 250 Ft on CAT6/STP with KD-CAT6STP1X

cable. 4K signal extension is 120 ft. with all cabling. KD-CATHD250Lite/POE carry IR

and RS-232 for controlling remotely located equipment.

Key Features

➔Auto-adjustment of feedback, equalization and ampliﬁcation depending

on the length of cabling used

➔Extends either IR or RS-232 control signals

➔Full support for 12-Bit Deep Color Video

➔Supports lossless compressed digital audio:

»Dolby

TrueHD, Dolby

Digital Plus and DTS

™

-HD Master Audio

Key Beneﬁts

➔HDMI, IR and RS-232 signals combined over a single CAT cable

➔Daisy chaining of Tx and Rx units allow allows almost unlimited extension

of HDMI, RS-232 and IR signals

➔Supports HDBaseT

Technology

Advanced HDMI®Features

➔3D – Capability to pass 3D stereoscopic signal formats

➔4K – Capability to pass 4K by 2K resolutions

Accessories

➔(2) 5V 2A DC Power Supply (KD-CATHD250Lite)

»KD-CATHD250Lite requires power on both Tx and Rx units

➔(1) 12V 2A (KD-CATHD250POE)

»KD-CATHD250POE only requires power on the Tx unit,

which extends power to the Rx unit

➔(2) Mounting Brackets

➔(2) Locking HDMI Cable Clips

➔(1) Grounding Wire

Table of Contents

About KD-CATHD250Lite/POE .......................................1

Connections .....................................................2

Extending IR and RS-232 Control .....................................4

Application Example ...............................................4

Settings.........................................................5

Speciﬁcations ....................................................6

Important Product Warnings & Safety Instructions .........................8

How to Contact Key Digital ..........................................9

Warranty ........................................................9

KD-CATHD250Lite_Manual.indd 1 7/24/13 4:39 PM

2 3

Connections

Before making any connections, power off your source and display devices.

Tx Extender:

➔Using a short HDMI cable, connect your source device to the HDMI port labeled

“HDMI Input”. To connect DVI use appropriate DVI to HDMI adapters.

➔Connect the CAT cable on the Tx extender to the port labeled “CAT5e/6

Output”.

➔If desired, you can connect IR or RS-232 signals to the 3.5mm jack at this time.

Refer to the below pin assignment chart for pin assignments.

➔Tx Pin Assignment Chart

Mode Tip Ring Sleeve

IR IR In IR Out Gnd

RS232 RxD TxD Gnd

Rx Extender:

➔Using a short HDMI cable, connect your display device to the HDMI port labeled

“HDMI Output”.

➔Connect the CAT cable on the Rx extender to the port labeled “CAT5e/6 Input”.

➔If you are extending IR or RS-232 signals, connect them to the 3.5mm jack.

Refer to the below pin assignment chart for pin assignments.

➔Rx Pin Assignment Chart

➔

Mode Tip Ring Sleeve

IR IR Out IR In Gnd

RS232 TxD RxD Gnd

Power up the extenders using the included power supplies and then power up

your source and display equipment.

»KD-CATHD250Lite requires power on both Tx and Rx units

»KD-CATHD250POE only requires power on the Tx unit, which extends power

to the Rx unit

KD-CATHD250Lite_Manual.indd 3 7/24/13 4:39 PM

4 5

Extending IR and RS-232 Control

You can extend IR or RS-232 control signals over the KD-CATHD250Lite/

KD-CATHD250POE baluns, for controlling remotely located equipment.

To extend control signals, follow the below pin assignment charts.

NOTE: The pin assignments are different on the Tx and Rx units.

➔Tx Pin Assignment Chart

Mode Tip Ring Sleeve

IR IR In IR Out Gnd

RS232 RxD TxD Gnd

➔Rx Pin Assignment Chart

Mode Tip Ring Sleeve

IR IR Out IR In Gnd

RS232 TxD RxD Gnd

Application Example

KD-CATHD250Lite

HDMI

CAT5e/6 or CAT6/STP

Up to 250’ – with Key Digital

KD-CAT6STP1X

Up to 200’ – with CAT5e/6

Achieved Distance: up to 518’

6’

Up to

250’

– with Key Digital

KD-CAT6STP1X

CAT6/STP

HDMI

Display

Blu-Ray

IR Emitter

KD-IRKIT300

IR Receiver

To control Blu-Ray

Daisy Chain Example:

KD-CATHD250Lite

HDMI

CAT5e/6 or CAT6/STP

Up to 250’ – with Key Digital

KD-CAT6STP1X

Up to 200’ – with CAT5e/6

Achieved Distance: up to 518’

6’

Up to

250’

– with Key Digital

KD-CAT6STP1X

CAT6/STP

HDMI

Display

Blu-Ray

IR Emitter

KD-IRKIT300

IR Receiver

To control Blu-Ray

Settings

Forced HPD:

The KD-CATHD250Lite/KD-CATHD250POE baluns allow modifying HPD (Hot

Plug Detection) protocol between the source and display. Modifying HPD protocol

will allow overcoming HPD handshake incompatibility between the source and

display. Modifying HPD protocol may also help ﬁx other problems related to HDMI

connectivity.

Range and Resolution:

➔Using KD-CAT6STP1X Super CAT6 Shielded cabling:

All resolutions up to 1080p, 1920x1200, 3D up to 250 ft.; 4K up to 120’

➔Using Third-Party CAT5e/6 cabling: All resolutions up to 1080p, 1920x1200,

3D up to 200 ft.; 4K up to 120’

NOTE: Use metal shielded RJ45 connectors with soldered

ground wires when terminating the CAT6 STP.

KD-CATHD250Lite_Manual.indd 4-5 7/24/13 4:39 PM

6 7

General

➔Regulation: CE, RoHS, WEEE

➔Enclosure: Black Metal

➔Product Dimensions (Each): L = 6” W = 4.1” H = 1.2”

➔Shipping Carton Dimensions: L = 7.48” W = 6.54” H = 5.2”

➔Product Weight (Each): 1 lb

➔Shipping Weight: 3 lbs

➔Power: UL Certiﬁed Power Supply – 5V / 2A, 110-240 VAC, 50-60 Hz

➔Power Consumption: Tx - 2.5 Watts, Rx - 5 Watts

Accessories

➔(2) 5V 2A DC Power Supply (KD-CATHD250Lite)

»KD-CATHD250Lite requires power on both Tx and Rx units

➔(1) 12V 2A (KD-CATHD250POE)

»KD-CATHD250POE only requires power on the Tx units,

which extends power to the Rx unit

➔(2) Mounting Brackets

➔(2) Locking HDMI Cable Clips

➔(1) Grounding Wire

Firmware Updates:

The KD-CATHD250Lite/POE Tx and Rx have an “Operation

Mode” switch. The 2 position slide switch is marked “Normal”

and “Program”. This switch should only be used in the

“Program” position when updating the unit’s ﬁrmware. Be sure

the switch is in the “Normal” mode for standard operation.

Speciﬁcations

Technical:

➔Inputs Tx (Each): (1) HDMI, (1) 3.5mm Stereo (as either input or output)

➔Outputs Tx (Each): (1) CAT5e/6

➔Inputs Rx (Each): (1) CAT5e/6

➔Outputs Rx (Each): (1) HDMI, (1) 3.5mm Stereo (as either input or output)

➔HDMI

and HDCP Licensing: Fully licensed and compatible with all HDMI

and HDCP techologies

➔Link and Range: 1080p/60, 1920x1200, 1080i/60, 720p, 1080p/24;

up to 250 ft. when used with KD-CAT6STP1X cabling, up to 200 ft. when used

with CAT5e/6 cabling. 4K resolution up to 120’.

➔Lossless Compressed Digital Audio Support: Dolby

TrueHD, Dolby

Digital Plus

and DTS

™

-HD Master Audio

➔DDC Signal (Data): Input DDC Signal: 5 Volts p-p (TTL)

➔HDMI Video/Audio Signal: Input Video Signal: 1.2 Volts p-p

➔HDMI Connector: Type A, 19 Pin Female

➔RJ45 Connector: Shielded Link Connector

➔Control Extension Connector: 3.5mm Stereo Jack

➔I2C Communication: EDID and HDCP bi-directional transparency

from Display to Source

➔CEC Support: To the main input and output HDMI channel.

KD-CATHD250Lite_Manual.indd 6-7 7/24/13 4:39 PM

8 9

How to Contact Key Digital

System Design Group (SDG)

For system design questions please contact us at:

»Phone: 914-667-9700

»E-mail: [email protected]

Customer Support

For customer support questions please contact us at:

»Phone: 914-667-9700

»E-mail: [email protected]

Technical Support

For technical questions about using Key Digital® products, please contact us at:

»Phone: 914-667-9700

»E-mail: [email protected]

Repairs and Warranty Service

Should your product require warranty service or repair, please obtain a Key Digital®

Return Material Authorization (RMA) number by contacting us at:

»Phone: 914-667-9700

»E-mail: [email protected]

Feedback

Please email any comments/questions about the manual to:

»E-mail: [email protected]

Warranty

All Key Digital

products are built to high manufacturing standards and should

provide years of trouble-free operation. They are backed by a limited two-year parts

and labor warranty.

Important Product Warnings

1. Connect all cables before providing power to the unit.

2. Test for proper operation before securing unit behind walls or in hard to access

spaces.

3. If installing the unit into wall or mounting bracket into sheet-rock, provide proper

screw support with bolts or sheet-rock anchors.

Safety Instructions

Please be sure to follow these instructions for safe operation of your unit.

1. Read and follow all instructions.

2. Heed all warnings.

4. Do not use this device near water.

5. Clean only with dry cloth.

6. Install in accordance with the manufacturer’s instructions.

7. Do not install near any heat sources such as radiators, heat registers, stoves, or

other apparatus (including ampliﬁers) that produce heat.

8. Only use attachments/accessories speciﬁed by the manufacturer.

9. Refer all servicing to qualiﬁed service personnel. Servicing is required when the

device has been damaged in any way including:

»Damage to the power supply or power plug

»Exposure to rain or moisture

Power Supply Use

You MUST use the Power Supply provided with your unit or you VOID the

Key Digital

Warranty and risk damage to your unit and associated

equipment.

KD-CATHD250Lite_Manual.indd 8-9 7/24/13 4:39 PM

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Key Digital Extenseur

Key Digital

Key Digital KD-IP120TX Manuel utilisateur

Key Digital

Key Digital KD-HDB150 Manuel utilisateur

Key Digital

Key Digital KD-X600ProK Manuel utilisateur

Key Digital

Key Digital KD-HDFIX22 Manuel utilisateur

Key Digital

Key Digital KD-HDMIWPRX Manuel utilisateur

Key Digital

Key Digital Phantom KD-HD1X1ProK Manuel utilisateur

Key Digital

Key Digital KD-CATHD300Lite Manuel utilisateur

Key Digital

Key Digital KD-HDDA1x1Pro Manuel utilisateur

Key Digital

Key Digital PRO Connect PCBKDCATHD Tx Manuel utilisateur

Key Digital

Key Digital KD-FIX418 Manuel utilisateur

Key Digital

Key Digital KD-CAT5XHDMI Manuel utilisateur

Key Digital

Key Digital KD-4KWHCEX Manuel utilisateur

Key Digital

Key Digital KD-XUSB2 Manuel utilisateur

Key Digital

Key Digital KD-CAT5XCAT5 Manuel utilisateur

Key Digital

Key Digital FatCAT KD-CATHD Tx Manuel utilisateur

Key Digital

Key Digital KD-X222PO Manuel utilisateur

Key Digital

Key Digital KD-X400POHK Manuel utilisateur

Key Digital

Key Digital Phantom KD-HDDA1X1 Manuel utilisateur

Key Digital

Key Digital KD-HDB150 Manuel utilisateur

Key Digital

Key Digital KD-CAT5XHDMI Manuel utilisateur

Key Digital

Key Digital KD-X411ProK Manuel utilisateur

Key Digital

Key Digital KD-X444SP Manuel utilisateur

Key Digital

Key Digital KD-X444LP Manuel utilisateur

Key Digital

Key Digital KD-X444LP Manuel utilisateur

Manuels Extenseur populaires d'autres marques

SY HDBT-60T Manuel utilisateur

Appsys ProAudio

Appsys ProAudio ADX-16 Manuel utilisateur

Atlona

Atlona RS232 Manuel utilisateur

IDK

IDK OPF-TH1000-A Manuel utilisateur

Enable-IT

Enable-IT 824WP Manuel utilisateur

Worx

Worx Landroid RadioLink WA0864 Fiche technique

TP-Link

TP-Link TL-WA730RE Manuel utilisateur

Camplex

Camplex CMX-HDMI-SFPL Manuel utilisateur

SC&T

SC&T HE03-4K Manuel utilisateur

Marmitek

Marmitek MegaView70 Manuel utilisateur

Samsung

Samsung SCS-26UC4 Manuel utilisateur

Foxun

Foxun SX-GES24 Manuel utilisateur

MuxLab

MuxLab 500771 Manuel utilisateur

foxunhd

foxunhd SX-AEX01 Manuel utilisateur

TERK Technologies

TERK Technologies LFIRX2 Manuel utilisateur

Devolo

Devolo Audio Extender Manuel

Edimax

Edimax EW-7438RPn V2 Manuel utilisateur

Shinybow USA

Shinybow USA SB-6335T5 Manuel utilisateur